XstreamHard
n00b
- Joined
- Jan 21, 2017
- Messages
- 60
Fuckin finally
I need to get my 9900K / 2080ti build started
I need to get my 9900K / 2080ti build started
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you for your quick reply.
I'm still searching for a alternative for the T318 for the narrow ILM socket. Its kind of easier to buy a new Board, than getting a alternative cooler.
Thank you for your quick reply.
I'm still searching for a alternative for the T318 for the narrow ILM socket. Its kind of easier to buy a new Board, than getting a alternative cooler.
Why not try the Asetek 545LC?
Nearly every AIO with pump @ 100% is noisy. You have to ajust the speed to 60-70%
115x retention is the defaul included retention of the Asetek 545LC.
Black Ridge: I don't know the exact release date. But I think it will be Q4 2018.
Perhaps, it was defective? They aren't usually that obnoxious.My Corsair H70 was very noisy even at very low speeds. A grinding noise.
or there was air in the pump.Perhaps, it was defective? They aren't usually that obnoxious.
In that case, it's defective. Closed-loop AIOs aren't serviceable by the user without voiding the warranty.or there was air in the pump.
nope, not defective. most aios have a tiny bit of air. you have to make sure the rad is above the pump and tubes are at the bottom. as per corsairs + cooler masters instructions.In that case, it's defective. Closed-loop AIOs aren't serviceable by the user without voiding the warranty.
Oh snap! Gearing up for the ghost s1 as well, and I just changed out my g.skill rgb ram for corsair lpx ram and thought I could get away with not removing the heatsink on them because they are already that low, but it looks like I'll be running into trouble here.It's a pain to find a good heatsink that works with your board and the A4. This is my setup for the Ghost.
http://imgur.com/a/FdXkE
These would be so perfect! You would even be able to fit a full 120x25mm fan with the Noctua. Instead I have to remove the heatspreader on a pair of corsair 4600 mhz ram and that's kind of risky.Seriously, look at the two crucial LP sticks on the right, they're almost lower than the clips on the slot.
View attachment 100807
I don't understand why in the DDR4 generation we don't have VLP memory.
I don't understand why in the DDR4 generation we don't have VLP memory. DDR4 consumes less power it should be totally doable to cram it on a smaller package.
where is this form factor for DDR4???
View attachment 100808
Then i was confused about all the different sizes, i thought those dimms that aren't taller than the socket were vlp. I'm glad we don't have to resort to those given those have even less options.Sorry I don't get it?
VLP DIMM = 18-19mm height
default DIMM = 30-33mm
From what i know everything else has no standard.
... i thought those dimms that aren't taller than the socket were vlp.
VLP DIMM = 18-19mm height
I bought them used, seems there arent any retailers that have them in stock anymore. On ebay.com a saw one guy selling 8GB sticks
So the LP arrived today even with the heatsink