The Lian Li Gallery

Here we go... My file server rebuild. See the A05 "its small" thread for more info..

IMG_3896_sm.jpg


IMG_3898_sm.jpg


IMG_3901_sm.jpg


IMG_3902_sm.jpg


IMG_3911_sm.jpg


IMG_3906_sm.jpg


IMG_3912_sm.jpg
 
My new case with the same setup plus few new goodies ..

missed my A05 ...

Anyway photo is more important ...

CloseSide.jpg


LeftInside.jpg


RightInside.jpg


SidePanelOn.jpg
 
My new case with the same setup plus few new goodies ..

missed my A05 ...

Anyway photo is more important ...

CloseSide.jpg


LeftInside.jpg


RightInside.jpg


SidePanelOn.jpg

That looks awesome, I have never seen that case with a really nice setup inside. But I got a question, how do you plug your monitor and sound jacks in with that dual 120 rad on the back? I am wondering because I was also thinking of doing the same thing but not sure if I'll be able to plug everything in. pic of the back?
 
Odin75 - Yeah thats true, i didnt want the port sealed up against the desk. Also the case has an outlet blower on the left side so I couldnt have that up against the desk either.

The sub looks and sounds just fine this way so I think its the ideal position, epsecially in terms of wire management which was a pain.
 
AFAIK the one i have is a PC-60 and it has all 80mm fans...
Yeah, as if the model numbers weren't confusing enough already, there are two versions of the PC-60. The first has three 3½" bays and two 80mm intake fans. The second, which I believe is the "PC-60 Plus" and, when ducts are added, the "PC-60 Plus II", has two 3½" bays and a 120mm intake fan.
 
Another difference, I believe, is that the PC-60 models have removable mobo trays while the PC-7 doesn't.
 
Is there a consensus on which of these lot is the best case to go for? They all look the same externally. I want at least 5 internal 3.5' bays, side window, and it to be as quiet as possible.

PC-7b ?
PC-60 ?
PC-65 ?

Thanks!
 
personally when i looked at all those i went with the 7 model series, becuase of the 120 fans....better quiter cooling over 80's.
 
I second that bradyapba.. PC-7 (a or b) was my choice as well. 120mm fans are the way to go. I even have a mod if you want to suck in tons of cold air into your case (with a 120mm fan)! Of course, you can do it in any style you like or color(s) that you like.


DSCN8700.jpg



DSCN8707.jpg
 
That looks awesome, I have never seen that case with a really nice setup inside. But I got a question, how do you plug your monitor and sound jacks in with that dual 120 rad on the back? I am wondering because I was also thinking of doing the same thing but not sure if I'll be able to plug everything in. pic of the back?

Actually I'm using a sound card at the lowest PCI slot possible as that won't interfere with the radiator .... my x-fi is at the bottom slot ..

as for my DVI port, I have dual DVI output port for the graphic card so I just attach it to the side that doesn't blocked by the radiator ..

Anyway redo the tubing a bit for better finishing ..

CIMG2933.jpg
 
Yea I only have an 80mm fan in the rear... I would have liked the 120mm looking at it now, but I thought I was going to use the duct that came with the lian li.. but plans changed and I got a massive heatsink SL128.. and there was NO way in hell the duct would have worked...

Anyone know if you can just get the removable mobo tray with the 120mm rear fan... in theory if you just swap mobo trays it would work...

I can only find mobo trays with the rear 88mm fan...

-Nigel
 
Yea I only have an 80mm fan in the rear... I would have liked the 120mm looking at it now, but I thought I was going to use the duct that came with the lian li.. but plans changed and I got a massive heatsink SL128.. and there was NO way in hell the duct would have worked...

Anyone know if you can just get the removable mobo tray with the 120mm rear fan... in theory if you just swap mobo trays it would work...

I can only find mobo trays with the rear 88mm fan...

-Nigel

The cases with 120mm fans are physically wider than the 80mm ones, and it's 80, not 88.
 
just got my AO8, needed a lighter case than my previous cent 5 and p180 with the upcoming geforce lan 4.

lianliAO8005.jpg

lianliAO8002.jpg
 
^ it looks like you really scratching your sata cables, couldn't you turn your HDDs around or turn around the cage itself? also noticed your ram is running in single channel mode?

other than that, looks good :)
 
hmm i dunno if in single channel, my old mobo config was 1color each stick, ill have to read the manual. Yes you can turn the cage around but its hassle and the sata cables have enough slack.
 
I just recently built a C2Q6600 system for a friend using that case (except it was the all-black version)...VERY nice. It's quite roomy inside too...
 
i think the v600 is nice but i really hate where they put the PSU. prolly woulda got that over the A05 if it wasn't for that.
 
I _almost_ bought the V600 but since I used the Freezer 7 Pro, I wasn't sure if it would fit with the PSU being where it was.
 
i think the v600 is nice but i really hate where they put the PSU. prolly woulda got that over the A05 if it wasn't for that.

Yea same here...I ended up going with the A05 as well (which is still an awesome case) but the V600 has more HDD storage space.
 
i think the v600 is nice but i really hate where they put the PSU. prolly woulda got that over the A05 if it wasn't for that.

Yeah, but I bought it for $15 :p and I'm using it for a friend's system so you can't beat it. (Pics of it when it's finished)
 
i think the v600 is nice but i really hate where they put the PSU.
Does anyone know what the PSU-to-CPU clearance is in the V600 and/or the similarly-arranged A58? Specifically I am wondering if the Silverstone NT06 cooler can work in these Lian-Li cases like it does in Silverstone's Sugo SG01 and SG03 cases, with the NT06 snugged up against the PSU's fan. The Sugo cases have a PSU-to-CPU clearance of 78mm.
 
if only the v600 psu postion was at the front . it would be a killer

mabey mod it ???? ;p
 
Back
Top