Your opinion on this build, please

Joined
Sep 1, 2006
Messages
58
Hello. I haven't built a PC since 2002 so I'm a bit lost. Here are the parts I've chosen thus far. This PC will be used for gaming. I intend to overclock the CPU a bit (or ask a more knowledgeable friend to do it for me, haha), probably up to 3.4GHz.


CPU: Intel Core 2 Quad Q6600 Quad Core Processor LGA775 Kentsfield 2.40GHZ 1066FSB 8MB
GPU: Galaxy GeForce 8800GT 600MHZ 512MB 1.8GHZ DDR3 PCI-E DVI-I HDCP HDTV Out OEM
MB: ASUS P5K-E/WIFI-AP ATX LGA775 P35 DDR2 1333FSB 2PCI-E16 3PCI 2PCI-E1 SATA2 Sound WLAN
RAM: G.SKILL F2-8000CL5D-4GBPQ PC2-8000 4GB 2X2GB DDR2-1000 CL5-5-5-15 240PIN Dual Channel Memory Kit
HDD: Seagate Barracuda 7200.11 3.5IN 500GB SATA2 8.5MS 7200RPM 32MB Cache Ncq
PSU: Pc Power & Cooling Silencer 750 Quad 750W Atx V2.2 EPS12V 24PIN Sli Active Pfc
DVD-RW: Pioneer DVR-212D Black DVD-RW 18X6X18 DVD+RW 18X8X18 DL 10X SATA 2MB OEM
Cooling: Sunbeam Tuniq Tower 120 AM2 LGA775 S754 S939 S940 Heatpipe Cooler 120MM Blue LED Fan CPU Heatsink


First, how does this look? Are there any parts that I should switch for something else?
Second, is there anyway that I can make sure I get the G0 stepping for my Q6600?
Third, what case should I buy?
Fourth, anything else I should know? :)

FYI, I'll be ordering everything from http://www.directcanada.com/


Thanks for your help.
 
That's what I was going to do, but I read somewhere that they won't get released until February at the earliest, and I'm sick of waiting. Are they going to be THAT much better?
 
Perhaps go with an X38 mobo. That way you can just update to a 45nm chip later if you want to. Thats my plan.
 
1) All right. Though even if you're planning to OC, all you need is DDR2 800 RAM. In fact any cheap set of DDR2 800 RAM is a good choice.

2) Actually buy it from a store? Check the model for SCALR I believe. I'll have to double check that.

3)Cases are a personal choice. As in one case may look good to me bu looks like shit to you. So it's up to you which case you should buy. Though here are some recommendations. I'm too lazy to link to Canadian sites so you're going to have to do some legwork on finding some of these cases:
Cooler Master Elite 330 RC-330-KKN1-GP ATX Case - $25
Cooler Master Centurion 534 ATX Case - $40
Cooler Master Centurion 532 ATX Case - $50
Cooler Master RC-690-KKN1-GP ATX Case - $60
Antec NSK4480 ATX Case With Antec Earthwatts 380W PSU - $68
Cooler Master Mystique RC-632S-KKN1-GP ATX Case - $70
Lian Li PC-7B Plus II Silver ATX Case - $90
XClio Windtunnel ATX Full Tower Computer Case - $110
Antec Sonata III ATX Case with Antec Earthwatts 500W PSU - $100
Antec P180B ATX Case - $109
Gigabyte Aurora GZ-FSCA1-ATB ATX Case - $110
Antec P182 ATX Case - $115
Antec P180 ATX Case - $120
Thermaltake Armor VA8000BWS Full Tower ATX Case - $130
Lian Li PC-A16A ATX Case - $150
Thermaltake Armor VA8003BWS Full Tower ATX Case - $150
Coolermaster Cosmos 1000 RC-1000-KSN1-GP Full Tower ATX Case - $150
Cooler Master Stacker RC-832-KKN1-GP Full Tower ATX Case - $150
Lian-Li V1000A Plus II ATX Case - $180
Lian Li PC-V1200 ATX Case (Silver) - $210
Lian Li PC-V1200 ATX Case (Black) - $214
Lian-Li PC-V1100A PLUS II ATX Case - $220
Lian Li PC-V1200B Plus II ATX Case - $240

4) Any Intel P35 mobo will be compatible with Penryn. In addition, from what I can see so far, Penryn will only offer around 10 to 15% more performance over current C2D CPUs. However, the new cooler running 45nm Penryn CPUs will be able to reach significantly higher OCs than the 65nm Core 2 Duos. So if you're a heavy overclocker, Penryn might be worth waiting for.
 
Thanks Danny. Out of these P35 mobos, which one would you pick? http://www.directcanada.com/search/?kw=p35

Also, does my choice of mobo affect the kind of RAM I should buy?


Finally, I'm a bit confused as to how overclocking and my choice of case and heatsink fit in together. Some of the more expensive cases you listed have lots of built-in fans; if I buy one of those cases, should I still buy an expensive cooling device like the Sunbeam Tuniq Tower? I mean, just much cooling do I need?
 
Case fans do not replace a good heatsink. You don't need lots of case fans but you do need a good heatsink, especially with a Q6600.

Your mobo choice will affect whether you buy DDR2 or DDR3 RAM.
 
What mobo I would get is could be different from what mobo you might get because our needs could be very different. I need 8 SATA ports so I'll pick up the DS3R. But you might not need so many SATA ports and would be fine with just four SATA ports. But here's a list of my recommended mobos. Prices and links are American but I'm sure you can find most on Directcanada:
Gigabyte GA-P35-DS3L Intel P35 Motherboard - $86
Abit IP35-E Intel P35 Motherboard - $90
Abit IP35 Intel P35 Motherboard - $120
Gigabyte GA-P35-DS3R Intel P35 Motherboard - $130
Gigabyte GA-P35-DS3P Intel P35 Motherboard - $145
Abit IP35 Pro Intel P35 Motherboard - $168
Gigabyte GA-P35-DS4 Intel P35 Motherboard - $175

Just to help you out: If you don't need RAID, more than 4 SATA ports or legacy ports, then the IP35-E is a good choice. If you need legacy ports, than the DS3L. If you need firewire and RAID, than the IP35. If you don't need firewire but want 8 SATA ports, RAID, and legacy ports and high overclocks, than the DS3R is a good choice. If you want the DS3R but need Firewire, then go for the DS3P. If you want something that can overclock pretty damn high, than the IP35 Pro.

As for whether or not your mobo willl affect your RAM choice, it does in a way. But rather than go with a long winded explanation, I'll just say this: Make sure that mobo supports DDR2 and just get DDR2 800 RAM.
 
Perhaps go with an X38 mobo. That way you can just update to a 45nm chip later if you want to. Thats my plan.

You can do this with a P35 board as well, as dan mentioned above. The only reason to get an X38 board would be if you want Crossfire. PCI-E 2.0 alone isn't worth the price premium. By the time PCI-E 2.0 cards are severely limited by PCI-E1.1 slots, it will be time for a new mobo, IMO.

Don't bother with DDR3 RAM. Its just not worth it yet.

Yes, if you plan on OC'ing, you'll need a Tuniq Tower, Thermalright Ultra 120 + S-Flex fan, or Thermalright Ultima90 + Panaflo fan.

Below is some math to help explain why all you need is DDR2-800...

/*------------- <cut n paste> -------------*/
Formulas for Intel platform @ 1:1 settings: (base FSB speed is SDR, or single data rate)
c x [Base FSB speed] = CPU speed (c = CPU Multiplier)
2 x [Base FSB speed] = RAM speed (DDR: double data rate)
4 x [Base FSB speed] = FSB speed (QDR: quad data rate; Effective FSB speed)

On Intel platforms, running the RAM higher than a 1:1 ratio with the CPU is, for the most part, useless, so don't bother trying to do so. If the BIOS does it for you, just let it. All you need is a 1:1 config, though. Here's some possible clock speeds (as always with OC'ing, your results will vary):

Q6600: 9 × 266 = 2.4Ghz, DDR2-533 << STOCK speeds
Q6600: 9 × 333 = 3.0Ghz, DDR2-667 << Nice OC
Q6600: 9 × 378 = 3.4Ghz, DDR2-756 << Good OC, near max for B3 stepping
Q6600: 9 × 400 = 3.6Ghz, DDR2-800 << Great OC, near max for G0 stepping
/*------------- </cut n paste> -------------*/

Your original choice of the P5K-E was fine, if you needed the features in it. If you need to compare boards' features, use Newegg's search/compare tool. Any of the boards Danny listed are good.
 
Back
Top