X58 Heatsinks?

Will the XIGMATEK HDT-S1283 work with the X58 chipset?

Not yet. Xigmatek has yet to release a bracket that allows the HDT-S1283 to be used with the Core i7 HSF mount layout. The only companies I know of that has brackets out or plan to release brackets are Noctua and Thermalright
 
True 120 and the bracket converter. or wait for the True 120 made for LGA1336 to be released very very soon...dont have any more info on that. sorry
 
Ok, cool. I'll grab the True 120 for now and I'll ask around again before it comes time for me to order.
 
Will the XIGMATEK HDT-S1283 work with the X58 chipset?

I asked Xigmatek CS the same question and they said that they'd be releasing one in December. Unfortunately, my Tuniq Tower is SOL. Their CS just responded that they have no plans to update the bracket which means it's gonna be an expensive paperweight for me.:mad:
 
It's too bad Xigmatek slept on the X58. You would think it would've been at the top of their priority list. I won't be purchasing my X58 components until December anyway so hopefully they'll have their X58 heatsink out by then.
 
Just curious, what kind of fan would you guys recommend coupling with the Thermalright True? Also, is there any major reason in your opinions to pay the extra coin to get the copper version over the black version?
 
fsh42na you can still sell it for a decent amount on ebay or fs/ft to someone sticking with a cheaper c2q system.
 
Will the XIGMATEK HDT-S1283 work with the X58 chipset?

I e-mailed Xigmatek about that last week funnily enough, they replied the same day and told me that they are releasing new 1366 LGA brackets shortly as well as a new cooler. They didn't give me a specific date but I would imagine by next month we should see something (I'm waiting on the new parts as well for the new build).

And I haven't seen anyone else step up with the new retention brackets, besides what I saw in the review on [H] they got a bracket from somewhere for the thermalright. Other than that the only 1366 compatible cooler on newegg looks like a modified reference cooler....unless someone knows of a site that has the new brackets and coolers?
 
Does anyone else find it kinda odd that we have known the launch date for the I7's for months now and yet the CPU, heatsink/cooling manufacturing companies, dropped the ball and didn't have a compatabile bracket or new cooler ready to go for launch? This is holding up my build. :(
I know I could use the stock HS and order an aftermarket one when they get released but I wanna do it all at one shot. Kinda sucks. :(
 
fsh42na you can still sell it for a decent amount on ebay or fs/ft to someone sticking with a cheaper c2q system.

Thanks that's just what I'm gonna do. Well, maybe not fleabay, but here on FS forums. Have one brand new and one barely used.
 
Does anyone else find it kinda odd that we have known the launch date for the I7's for months now and yet the CPU, heatsink/cooling manufacturing companies, dropped the ball and didn't have a compatabile bracket or new cooler ready to go for launch? This is holding up my build. :(
I know I could use the stock HS and order an aftermarket one when they get released but I wanna do it all at one shot. Kinda sucks. :(


Yup I'd definitely want to do everything at once rather than go stock and then have to yank the mobo out to swap heatsinks. They are holding up progress!!!!;)
 
it's particularly surprising considering how much people hate the s755 clips and intel's decision to stick with the same mechanism
 
Yeah. It's really annoying. It's almost impossible to find any LGA1366 heatsink in Canada right now, so I'm running my i7 920 and Asus P6T Deluxe on the stock Intel heatsink. :(
 
maybe the heatsink manufacturers were left out of the loop, or they didn't have any kind of reference board to work from to create a bracket/heatsink for the fit, until the official launch...or the sneak sales getting out before the 14th.
 
I know of only one X58 motherboard out there that supports both LGA1366 and LGA775(Bolt through only on LGA775) and that's the Foxconn BloodRage motherboard, But It's not supposed to be released until December of 2008. :D And that's the one I'm looking at getting as It's touted as having 3 Dimm slots for High speed ram(24GB capacity) and LGA775 heatsink mounting holes.
foxconn_blood_rage_tcm.jpg
 
maybe the heatsink manufacturers were left out of the loop, or they didn't have any kind of reference board to work from to create a bracket/heatsink for the fit, until the official launch...or the sneak sales getting out before the 14th.

Doubtful. Cooler Master has already updated some of its line (I picked up a V8 at Micro Center on Sunday). All it required was a slightly different mounting bracket. It'll just take time for the retail channels to get the refreshed boxes with the added hardware in stock. I think I got lucky because it's a brand/line they don't stock many of, so they're frequently getting new small shipments.
 
Will the XIGMATEK HDT-S1283 work with the X58 chipset?

I contacted them, they state mid december it will be available (a crossbow) for the i7.

This sux as i have the new cpu and motherboard coming monday, so it looks like ill have to take the motherboard apart twice.
 
I know of only one X58 motherboard out there that supports both LGA1366 and LGA775(Bolt through only on LGA775) and that's the Foxconn BloodRage motherboard, But It's not supposed to be released until December of 2008. :D And that's the one I'm looking at getting as It's touted as having 3 Dimm slots for High speed ram(24GB capacity) and LGA775 heatsink mounting holes.
foxconn_blood_rage_tcm.jpg

How can you possibly have 24 GB of RAM with three slots???? I have yet to see 8GB Ram sticks............:eek::eek:

That board is teh gay.
 
I received a noctua nh-u12p SE1366 heatsink from moddersmart.

Man, this this is huge and very heavy! Is there any special considerations for attaching one of these monster heat sinks on a MB on a tower? It sure seems like it's going to be a lot of torque.
 
I received a noctua nh-u12p SE1366 heatsink from moddersmart.

Man, this this is huge and very heavy! Is there any special considerations for attaching one of these monster heat sinks on a MB on a tower? It sure seems like it's going to be a lot of torque.

People have been using them for a long time, and I haven't really heard of any problems. Managed to mount mine without any problems in a HAF 932.
 
Interesting. But will the plate size of the 775 designed S1283 cover the entire space of the i7 processor? TBD.

I should have checked that before i put on the stock cooler.. eek..

I hope so.. i guess ill find out when i take the stock one off.
 
I doubt the Foxconn Bloodrage's Socket LGA 775 mounting holes are compatible with any retention brackets due to the retention bracket of the LGA 1366 socket for the CPU(not HSF)
foxconn%20LGA%201366%2003.jpg
 
All of the following will be exceptional LGA 1366 aftermarket coolers:

Cooler Master V8
Thermalright Ultra 120 eXtreme
Noctua NH-U12P

Core i7s are HOT! literally hot enough to fry an egg in a couple of seconds

I would say that 1 fan is not sufficient as many of the posters here have verified

I would also suggest getting the Noctua NH-U12P 1366 over the others since it offers the best bang for buck with high performance TIM, 2X high quality BA NF-P12 fans, retention bracket, fan clips and quiet efficient cooling

Don't get me wrong though, the other 2 are amazing and vary within ~ +/- 2C of each other in an apples to apples comparison
 
Back
Top