Quick (stupid) question:
Using Drive Management add-in with the wireframe display, what is the best way to identify which hard drive is in which bay?
The smartest way would have been to plug them in and add them to the pool one by one and record them... but I didn't do that
I know where *most* of them are.... but the 4x500gb drives are a mystery to me as well as two of the three WD 2 TB drives (I know where one of them is).
Basically my question is, is there a faster way to find out rather than:
1. Shutdown
2. Unplug one drive
3. Reboot
4. See which one says not available
5. Rinse and repeat
I'd like to just take care of it now if possible so in the unfortunate case of a failure or problem, I'm not having to deal with the added annoyance of hunting around for which drive is giving me issues.
Using Drive Management add-in with the wireframe display, what is the best way to identify which hard drive is in which bay?
The smartest way would have been to plug them in and add them to the pool one by one and record them... but I didn't do that
Basically my question is, is there a faster way to find out rather than:
1. Shutdown
2. Unplug one drive
3. Reboot
4. See which one says not available
5. Rinse and repeat
I'd like to just take care of it now if possible so in the unfortunate case of a failure or problem, I'm not having to deal with the added annoyance of hunting around for which drive is giving me issues.