Which Socket A Board?

MikalCarbine257

Limp Gawd
Joined
Feb 22, 2006
Messages
149
Looking for a socket A mobo to replace my dad's POS K7N2 Delta-L

Which does one recommend? I've had an NF7-S R2 and it was nice, but I heard the DFI's might pwn it

NF7-S R2
DFI Infinity NFII Ultra
DFI Lanparty NFII Ultra (Rev b?)
 
The NF7-Sv2 was the bomb in the SocketA days. Mine was a nice board, that still lives in my bro's PC w/my old 2500+.

Old school Abit FTW.

-bZj
 
I had both NF-7 and Infinity.... performance wise, the Infinity will be better......

You cant go wrong with any of the boards you mentioned, if it was my choice Ill go for the Abit.....
 
Performance as in ability to OC? I'd like to hit 230-250MHz @ 2-2-2-5 with my CH-5. Whichever board I choose too will be volt modded to all hell :D
 
I've been very happy with my NF7-S v2. No reason for me not to recommend it.
 
I had the NF7-S. greatest board until it went out. Now I have the MSI Neo platinum something...

That or the Asus A7N8X I think it was is good.
 
Performance as in ability to OC? I'd like to hit 230-250MHz @ 2-2-2-5 with my CH-5. Whichever board I choose too will be volt modded to all hell :D

Maybe my comaprison wasnt all that accurate cos the NF7 I had was in the early days of that chipset while the Infinity was alot later..... The NF-7 did 233fsb ( no voltmod ) while the infinity did almost 280fsb ( fully moded ).... 2-2-2-5 on my old khx3200 BH-5 ;)

My Infinity..... rip
mydfi.jpg
 
Abit and Asus. Had both brands with various chipsets and none gave me any problems.
 
Maybe my comaprison wasnt all that accurate cos the NF7 I had was in the early days of that chipset while the Infinity was alot later..... The NF-7 did 233fsb ( no voltmod ) while the infinity did almost 280fsb ( fully moded ).... 2-2-2-5 on my old khx3200 BH-5 ;)

My Infinity..... rip
mydfi.jpg

I assume that's your infinity, pretty sexy. I plan on modding to the fullest.

I had an NF7-S back in the day, even with the vdd mod it wouldn't go past 217FSB

I wouldn't touch an A7N8X again, I had one and it wouldn't even run 200fsb 100% stable

Any information regarding the infinity vs lanparty ultra-b?
 
The NF7-S rev.2 is arguably the best socket A mobo ever made and IMO is your best bet for OCing.I have owned 2 NF7-S rev.2 one OCed to 245 stable and one OCed to 250 stable. Both using Kingston Hyper-X 2.2.2.5 memory
 
I had the Asus as well and all it did was 211fsb IIRC.... but at that time anything over 200fsb was good..... it didnt even have support for 200fsb at that time....

Yeah, that was my Infinity, all posiible mod was done and I pretty much bought along with a 2600+ mobile with the intention of blowing it up lol..... The Infinity didnt make it ( forgot how much voltage I was feeding the northbridge, but it was too high lol ) and the 2600+ lived minus some of its L2 cache ..... I learned its not good to feed your cpu 2.32v ....

3gs.JPG
 
I've actually used all three boards and I liked the DFI Ultra rev. B best, however the Infinity is essentially the same board OCing wise. The NF7-S isn't bad either, but did have some issues with the northbridge cooler, while the DFI's were passively cooled.

Either way, finding any of these boards isn't going to come cheap anymore. I sold my NF2 Ultra rev. B for over $100 last year here in the forums.
 
Yes I replaced the north bridge cooler on both with a vantec cooler cant remember what they were called.
 
Yes I replaced the north bridge cooler on both with a vantec cooler cant remember what they were called.

Iceberq? I used a bunch of them for various chipset cooling applications. In fact, there's one on my NF7 I still use in my office.
 
I'll probably strap on some epic heatsink to the northbridge, I plan to be putting some decent volts through it.

Anyone think something like the HR-05 will fit on it? I'd like to use some sort of heatpipe design for better temps compared to modding some stock CPU heatsink onto it
 
There's no mod needed to fit the stock AMD cooler..... all you need is some Artic Silver Adhesive lol.......
 
That's at least for the infinity correct? The NF7 had clearance issues with my SP97 and Zalman northbridge heatsink back in the day

I'll probably go for the infinity, can anyone link me to some mods for it?
 
The ASUS A7N8X Deluxe (The one with the MCP-T "Soundstorm" southbridge). I remember when I got mine...it was like getting a $150 soundcard with a free motherboard thrown in. That was a great motherboard IMHO. I may have mine bronzed.

If you can find this or any of the boards you have listed in your post for sale from a reputable reseller, I'd be interested to know where. I have a 3200 Barton in a box.
 
The ASUS A7N8X Deluxe (The one with the MCP-T "Soundstorm" southbridge). I remember when I got mine...it was like getting a $150 soundcard with a free motherboard thrown in. That was a great motherboard IMHO. I may have mine bronzed.

If you can find this or any of the boards you have listed in your post for sale from a reputable reseller, I'd be interested to know where. I have a 3200 Barton in a box.

That 3200+ Barton is worth $150 or so on ebay. I just sold one for $147 as an OEM with no heatsink. Personally, I'd sell it and then go find a cheap XP-M to play with.

I don't know of anywhere that carries high end Socket A boards like that. Your best bet is to find one used in a forum. If you go to ebay, you'll pay through the nose for high end stuff like that.
 
Back
Top