Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
EDIT:jacuzz1 said:um the Asus Ultras are just that Asus. They are not true Ultras. take a close look at the memory specifications
LittleMe said:I already bought the cardsso waiting is out of the question. I can purchase a newer revision board no problem later on if it's better than whatever I get. I'm just stuck between the DFI and the Asus. Although the A8N is doing poorly right now, I've always had great luck with them, which is what is keeping them around in my decision right now.
LittleMe said:Checked up on it, just to make sure. These are 425/1.1 which makes them stock retail 6800ultras. They are retail packing from what I was told, but it doesn't look like Asus is selling them Retail which is weird. I've only found them listed online on wholesale sites.
Arvig said:Actually, 400/1.1 I think is the stock speed for 6800 Ultras, the eVGA on Monarch Computer I linked to when I asked if you could cancel your ASUS cards is running at 400mhz for instance, so your ASUS cards are clocked like a BFG 6800 Ultra OC.
Gskill LE 2x512..ram without spreader...LittleMe said:What RAM are you going to put in that? Please, post pics of your memory installed. I'm drying to actually see how close it is.
Its pretty wideLittleMe said:How close is it? If you had heatspreaders on them would they touch/bend?
LittleMe said:That doesn't seem that bad. I guess I can see if there were rather large heatspreaders on the ram. hmmm, now the gigabyte is back in the mix with the asus, dfi and gigabyte. i still want to see reviews on the dfi i guess before i make a final choice.
LittleMe said:Ok, I took the plunge. I just ordered my A8N-SLI should be here in about week. The bad thing about supporting a friend at CompUSA, I have to wait longer for everything since it's through the Business side. Oh well.
spaceman said:lil update. i went with a 64 3200 asus sli mobo 2 bfg 6800gt 2X512mb ocz pc3700 1 74gb raptor and without any ocing on an operating sys in dire need of reformatting I got a 3d mark 05 score of 8200! big jump from the 1218 i got with a 6600gt...asus is a good board in my opinion. stable anyway.
HeavyH20 said:Well, made some initial tests with the MSI Diamond SLI board. Here is a contrast to the ASUS:
Better:
1. The northbridge fan is MUCH quieter.
2. Likes TCCD. I was able to get my DDR to 295 FSB, 1T
3. A little more VCore for the Winnie crowd. 1.68 set in BIOS. I was able to get my CPU to 2.7 Ghz versus the unstable 2.5 GHz on the ASUS
4. The power caps are HUGE.
5. The RAM is not right next to the DDR
6. The SB64 Live with EAX sound
7. No errors when you use no fans.
Not Better:
1. The PCI-E cards are way too close. I would not even want to run two Ultra's on this board unless you have slim water blocks. The GT HSF should be fine.
2. No PCI-E 1X slots
3. The SLI bridge clip does not distinguish primary and secondary like the ASUS SLI bridge. You have to guess.
4. The SLI/Single card selector uses a wimpy plastic tab. The ASUS selector is a little more solid.
LittleMe said:That MSI and Gigabyte board both seem great overclockers. I'm hoping that this Asus board will fit my needs. I'm not going to be overclocking anywhere near where you guys are going so I think it will.
Ram heatsinks are OK then?HeavyH20 said:Well, made some initial tests with the MSI Diamond SLI board. Here is a contrast to the ASUS:
Better:
1. The northbridge fan is MUCH quieter.
2. Likes TCCD. I was able to get my DDR to 295 FSB, 1T
3. A little more VCore for the Winnie crowd. 1.68 set in BIOS. I was able to get my CPU to 2.7 Ghz versus the unstable 2.5 GHz on the ASUS
4. The power caps are HUGE.
5. The RAM is not right next to the DDR
6. The SB64 Live with EAX sound
7. No errors when you use no fans.
Not Better:
1. The PCI-E cards are way too close. I would not even want to run two Ultra's on this board unless you have slim water blocks. The GT HSF should be fine.
2. No PCI-E 1X slots
3. The SLI bridge clip does not distinguish primary and secondary like the ASUS SLI bridge. You have to guess.
4. The SLI/Single card selector uses a wimpy plastic tab. The ASUS selector is a little more solid.
lt_wentoncha said:Ram heatsinks are OK then?
Thanks for posting.
Heh, I'm just worried the DDR system RAM won't fit because the slots are so close. I have no idea what the other thing is, but since you've mentioned it I'll assume it's importantArvig said:You mean are the RAM heatsinks really close on the MSI, or do you mean the MOSFET heatsink opposite the CPU from the memory, near the IO ports?
Tell you what, ask me in three or four days, I'll be switching to the MSI then.![]()
lt_wentoncha said:Heh, I'm just worried the DDR system RAM won't fit because the slots are so close. I have no idea what the other thing is, but since you've mentioned it I'll assume it's important![]()
Arvig said:Don't know if you saw me mention this, but when I had a 20 pin PSU my board would lock up once in a while on the splash screen. Switching to 24 pin cured that...but now it's doing it once in a blue moon again. And my chipset fan is now starting at 2500 RPM and going up to 7500 RPM, it's not quite hitting 8000 RPM now. Yes, I ordered a replacement fan...but well...I'm going to go for the MSI and see what happens. I had wonderful luck with the MSI Neo 2 Platinum so I'll risk it. Worst case, it's as buggy I guess...err...okay, I've seen one or two posts on other forums where the MSI did sound good.