What is your current CPU Cooling Device?

S

skyyless

Weaksauce
Joined
Feb 15, 2009
Messages
105
Mine:

Intel: ASUS Silent Knight AL on a Q6600@3.5Ghz 15-20c 24/7
AMD: ASUS Silent Knight II [Copper] on a Phenom II x4 940@3.5Ghz 28-34c 24/7
 
Minja w/E8500

img_8241.jpg


Ninja2 w/Phenom x3 8450

IMG_7855.jpg


Ninja2 w/Q9300 @3Ghz (1.032v)

img_8108.jpg
 
TRUE black and 2 x 2000 rpm fans, will get a pic up later. Some bastard stole my camera.:(
 
S1283 with stock fan and backplate. Keeps me at 4ghz, can probably go higher but I haven't attempted it yet.
 
noctua nh-c12p running q6600 @ 3.2ghz... temps reach about 60c load. not bad for my case.

1t1unn.jpg
 
still using my trusty old zalman CNPS 9500 LED that i got like 2.5 years ago.

getting around 40c idle and around 65c load. i know it can do better but im to lazy to reseat it. i switched its orientation around (a05b has reverse cooling) and i didnt bother reapplying paste.

dsc01178fg9.jpg


edit: damn i need to clean out that sub sometime lol

edit2:

skyyless said:
Mine:

Intel: ASUS Silent Knight AL on a Q6600@3.5Ghz 15-20c 24/7
AMD: ASUS Silent Knight II [Copper] on a Phenom II x4 940@3.5Ghz 28-34c 24/7
Click to expand...

so you are saying your Q6600 idles at 68f? must be living in a freezer or something...

my ambient temp is like 72f
 
Ninja 1 fanless on a stock E8400 (10-25C)
Ninja 2 with NMB-MAT 1200RPM on a E6420@3.2GHz (30-45C)
 
Asaka Nero

OCd tp 3.33 and under load it is around 80c them I7s run pretty hot
 
haadij404 said:
still using my trusty old zalman CNPS 9500 LED that i got like 2.5 years ago.

getting around 40c idle and around 65c load. i know it can do better but im to lazy to reseat it. i switched its orientation around (a05b has reverse cooling) and i didnt bother reapplying paste.

dsc01178fg9.jpg


edit: damn i need to clean out that sub sometime lol

edit2:



so you are saying your Q6600 idles at 68f? must be living in a freezer or something...

my ambient temp is like 72f
Click to expand...

not really lol

lynnspec-1.jpg
 
CM V8, so far so good, would have preferred a TRUE-120 RT1366 but none of the local stores carry it and i was impatient and didn't want to have all the parts lying around for a week while waiting for it
 
At this moment a Thermalright XP-120 with a fat Sanyo Denki 120x38 on a 3.4gig northwood, tomorrow(crossing fingers) a XIGMATEK Dark Knight-S1283V on a Q9550(EO)-yes, I'd love the Sanyo Denki on the Xigmatek, but its only 3 pin and my new mobo is 4 pin pwm only.
 
HSF: GIGABYTE GH-PDU22-SC EVR Sleeve CPU Cooler
CPU: AMD X2 4600+ 2.4GHz stock @2.64GHz
TEMPS: Idle 22c, load 35c

My 98 rig has stock Pentium 3 HSF, thing runs at idle of 19c!!

I can't wait to see how it performs with a 940BE :cool:
 
A few, Right now i have a Lapped Tuniq 120, I used to switch back and forth with a TT Big Typhoon (Also lapped), but temps were the same, so i switched back.

I just got my V10 today and im still testing, so far, E5200 @ 4.3Ghz @ 1.49V, does not go over 55C, Which is awesome since on the tuniq it will spike around 75C. I also noticed my Pi blacks a bit cooler, Gotta love a V10
 
Casper312 said:
A few, Right now i have a Lapped Tuniq 120, I used to switch back and forth with a TT Big Typhoon (Also lapped), but temps were the same, so i switched back.

I just got my V10 today and im still testing, so far, E5200 @ 4.3Ghz @ 1.49V, does not go over 55C, Which is awesome since on the tuniq it will spike around 75C. I also noticed my Pi blacks a bit cooler, Gotta love a V10
Click to expand...

OoOO i must see a picture. I want one of the V10
 
The main rig has a Xigmatek S1283 and the HTPC has a Scythe Shuriken. Both are awesome coolers in their current applications.
 
Scythe Mugen 2 on Core i7 920 running @ 3.8 1.35v


40C idle 75~79 load (under full prime 95/linpack testing)

can run 4,02 but not 100% stable.
 
Tremulant said:
At this moment a Thermalright XP-120 with a fat Sanyo Denki 120x38 on a 3.4gig northwood, tomorrow(crossing fingers) a XIGMATEK Dark Knight-S1283V on a Q9550(EO)-yes, I'd love the Sanyo Denki on the Xigmatek, but its only 3 pin and my new mobo is 4 pin pwm only.
Click to expand...

3pin fan should plug into a 4pin PWM header. You just won't have PWM control.
 
You must log in or register to reply here.
Back
Top