I just upgraded my Vega 64 x 2 to Vega 64 x 4. I redid my waterblocks on my original Vega 64 and put it in the 4th PCI slot. Now, that GPU is not recognized. I tried swapping the power connectors from a GPU that was recognized, and it's still not. I tried disabling the other GPU's via PCI-e switch on the motherboard. I tried swapping the power cables, fliping the BIOS switch.
I tried booting from the GPU and it's not recognized at the BIOS level.
I previously ran 4x r9 290 so the motherboard used to work fine in a 4-way configuration.
I had a minor water leak yesterday with deionized water, and I dried it out, and carefully inspected the PCI-e slots seeing no water. I suspect maybe I missed some water or didn't seat the GPU properly.
Before I disassemble this whole thing and drain my loop and reseat the GPU, is there anything else I can try?
I have Haswell i7
Gigabyte Z87-OC Force
16GB DDR3 2400 RAM
1TB Samsung 950 EVO
4x XFX Vega 64 under EKWB waterblocks
Corsair AX1500i
I tried booting from the GPU and it's not recognized at the BIOS level.
I previously ran 4x r9 290 so the motherboard used to work fine in a 4-way configuration.
I had a minor water leak yesterday with deionized water, and I dried it out, and carefully inspected the PCI-e slots seeing no water. I suspect maybe I missed some water or didn't seat the GPU properly.
Before I disassemble this whole thing and drain my loop and reseat the GPU, is there anything else I can try?
I have Haswell i7
Gigabyte Z87-OC Force
16GB DDR3 2400 RAM
1TB Samsung 950 EVO
4x XFX Vega 64 under EKWB waterblocks
Corsair AX1500i
Last edited: