• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Upgrading my lappy!!

Laserboy

n00b
Joined
Apr 11, 2008
Messages
11
Hi all.

I got a new laptop by HP seen here and it's got everything I wanted except the faster processor. I figured I could upgrade my processor when I wanted to and save money doing it this way. It's got a mainstream gpu w/ 512mb dedicated memory, 320gb between the two satas, tv tuner with blu-ray, webcam w/ mic and even HDMI out. It also has expansion 3 which I have no idea what it's for. Here is what you would see if you went to HP or related type to get a customized. From what the site says, I should be able to throw in a T8300 (2.4GHz) at 800MHz FSB and it should work fine even with current BIOS I assume. The current is a T5450 (1.67GHz) at 667MHz. At the HP site, the lowest processor is a 667MHz T5550 (1.8GHz). My thought is that for this particular model, they won't specially use a different motherboard for this T5550 or T5450 like I have. I think they just threw in the process and it was forced down to 667MHz.

What do you think?
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
You do know that switching the CPU will be more difficult than just pulling the old one out and popping a new one in?
 
I'm not sure the CPU is soldered in. It really depends on the design of the laptop. I pulled a cpu out of an older HP 17" model without too much trouble at all.

The bios might limit you, but I doubt they have multiple bioses for identical boards. My guess you would be 90% likely to be able to swap out the CPU assuming you can get to it.
 
I agree with kirbyrj. I had a turion acer laptop and I peaked at the processor on that guy. It doesn't seem like they would solder it on. As for the bios, I might be able to look up information about it.
 
Back
Top