Upgrading, how should I do it?

ps3guru03

Gawd
Joined
Jan 8, 2007
Messages
742
If you seen my other thread, you may already know that I have bought the parts, and they are on their way.

If not, here's what I am upgrading my PC to...

FROM/TO
-PD 820/PD 820 No Change
-Windows XP Pro/ Windows XP Pro No Change
-1.5GB Ram/3.00GB Ram Change
-Radeon x300/ eVGA 7900GT KO Change
-2x80GB HD/ 2x80GB HD No Change

Alright, anyways, the reason I have posted this thread is that the parts are arriving, and I want to know in which order I should install them in. I want to do a complete restore also...

Here's what I was thinking....
Restore with no upgrades installed. Once I am done restoring, and in Windows, I will uninstall the x300 Radeon. I then will shut down the PC. Take out the x300 Radeon and replace it with the 7900GT KO. I will then take out 1.5GB of the ram, and add 3.0GB. I then will power on my PC, and install necessary drivers.

Should I do it the way that is listed above...or no??? Please feel free to post any suggestions.

Thanks In Advance! :)
 
I say just straight up reinstall everything to just keep things clean.

Or you can just install the RAM. After taht, download and run Driver Cleaner to clear out the ATI drivers and then install the video card. Then install the drivers for that card. Simple as that. No need to reimage anything.
 
If your not changing out your mobo, all you need to do is run DriverCleaner, as recommended above, after uninstalling your ATI drivers, and you should be just fine.
 
Okay...after reading the posts above, here's what I am thinking to do.....

Uninstall the ATI radeon x300, then run Drivercleaner. Once Drivercleaner is done, I shutdown my PC. I then take out the radeon x300 and place my 7900GT KO in. I also then take out my 1.5GB of memory, and replace it with 3GB of memory. I then start up my PC again, and then log-in and install the drivers for the 7900GT KO...DONE!

BTW, what driver should I use for the 7900GT KO...I was thinking of the NGO NVIDIA Optimized Driver v2.15822....that should do it right???
 
if that motherboard supports dual channel RAM your killing your speed with that odd amount of RAM.
 
if that motherboard supports dual channel RAM your killing your speed with that odd amount of RAM.

The memory is not going to be an odd amount.

Actually here is how my memory is going to be setup.....
memoryvm7.jpg
 
The method looks ok to me, make sure you run driver cleaner several times to get rid of any ati leftover file :D
 
The method looks ok to me, make sure you run driver cleaner several times to get rid of any ati leftover file :D

Sure...will do...actually, when I restore my PC, I think the drivers for the radeon x300 will not be installed...so then all I have to do is just replace it with my 7900GT KO...:)
 
Back
Top