Phazedplasma
Limp Gawd
- Joined
- Jan 29, 2004
- Messages
- 149
So I just upgraded to sandy bridge with a new build:
i5 2500
Asus p8p67
4x2GB Corsair DDR3 1600mhz 1.65v
GTX 275 (from old system)
WD Raptor 300GB
So my comp boots fine, installs windows, then when I get into windows It restarts on me. This has taken anywhere from 10seconds to 2 minutes.
Some things I have tried so far:
-Safe mode (ran in safe mode fine for a while, checked event log, no windows errors besides the critical ones that say PC has shutdown unexpectedly)
-I can sit in bios forever
-CPU is running in the mid 40s (C) and mobo is mid 30s
-no BSOD
One issue is my RAM, which is showing up in bios as 1333mhz and 1.5v I can change to XMP settings in bios and then it will recognize 1600mhz and 1.65v but the issue in windowds still happens.
I have tried reinstalling windows and then only installing the drivers manually (not using the asus disc) but I wasnt even able to install the first driver before it restart.
Thanks,
i5 2500
Asus p8p67
4x2GB Corsair DDR3 1600mhz 1.65v
GTX 275 (from old system)
WD Raptor 300GB
So my comp boots fine, installs windows, then when I get into windows It restarts on me. This has taken anywhere from 10seconds to 2 minutes.
Some things I have tried so far:
-Safe mode (ran in safe mode fine for a while, checked event log, no windows errors besides the critical ones that say PC has shutdown unexpectedly)
-I can sit in bios forever
-CPU is running in the mid 40s (C) and mobo is mid 30s
-no BSOD
One issue is my RAM, which is showing up in bios as 1333mhz and 1.5v I can change to XMP settings in bios and then it will recognize 1600mhz and 1.65v but the issue in windowds still happens.
I have tried reinstalling windows and then only installing the drivers manually (not using the asus disc) but I wasnt even able to install the first driver before it restart.
Thanks,