The [H]ardForum Perpetual Freebies Thread

yeah I know just dont wanna wait a month.

 

I'm intrigued........

 

I know, right?

 

There you go again stalking me. LOL I was first!

 

Oh damn, you got me.

 

doea anyone have a gopro 3+ mobo for either free or allot cheaper than a used gopro 4?

 

I have given other items away but I am in need of a SSD for a project small is ok 32 gig or bigger, I know a long shot here but I'm hoping someone has one in a desk drawer not being used.

 

Just looking for shipping on this, if you dont need the boxes, everything should fit into a small flat rate usps box for $7, if you want the boxes, then Id have to get a box and let you know the actual cost after shipping, its very lightweight

Favi Smart Stick and Favi Keyboard controller
Had this sitting around for a long time, used it alot back in the day, but havent used it in about a year, plugged it in tonight and everything works
Its the first rev version, ie 4gb model.
https://www.amazon.com/SmartStick-Android-Steaming-Player-built/dp/B009JBGR80

---------------GONE

 

Anybody have an old iPhone 4S or iPad

 

i need a decent overclockable mobo for a Q6600 CPU, seems my abit P35pro has gone tits up and will not boot unless i really fiddle with the memory sticks

 

anyone have a qx6600 cpu or some 2 gig DDR2 ram?

If so please Pm me so I will see it.

 

Would anyone happen to have a good PCI graphics card? Looking for something 16mb or better. Card Found!

I have a ASUS branded AGP card. Number on card: 5197-1531
Free + shipping

 

Anyone?

 

I'll look bro, but I think that the only PCI cards I have are both 8 MB is all. I'll double check this evening, though. If I have one, it's sure yours for shipping man.

 

Looking for a dvi-d cable and 3.5 inch hdd cages. Will pay shipping obviously.

 

I don't have any right now as I just shipped out a few 2 Gig sticks on here to another guy as freebies. I get old PC's in for recycling about every other week so I'll grab what I can and then see if you still need it. I only grab 2 GB sticks because I don't see the point in grabbing 1 GB but once I get some more I'll let ya know

 

^^^

 

Fastvan67 , I looked at the couple of PCI cards that I have and my assumption was correct man. I don't have one that is 16 MB. Sorry bro.

Was really hoping I could help ya out man.

 

Found some really old netowkring stuff. All are new in sealed retail packaging. Yours for the cost of shipping + heatware. You must have a history of giving on this forum. Please PM, thanks.

Linksys WPC54G
Linksys WMP54G
Linksys WMP11
SMC SMC2208USB/ETH
SMC SMCWPCI-G

 

Stinger608, sorry, was out for a couple days. Medical stuff. I really appreciate you looking though.

 

Sorry for the begging but if anyoen has some unssued Corsair PSU cables i could really used them
mainly for AX1200I but other i cna used and just rewire themmyself.
The ATX motherboard cable is the really important one for me to get.

 

I think i have some at work. let me check monday/tuesday. give me a PM if i forget to get back to you.

 

Thanks SvenBent

 

I have a buttload of DDR 2 sodim's and a few laptop CPU's. I'll never use them so I might as well give them to someone who can'. Just pay for shippigng

 

I could use 2 sticks of ddr2 sodimm

 

Have Star Wars: KotOR free to the first person to PM me.

Just requesting heatware feedback in return. Hope everyone enjoys game-day today!

 

Got any pictures of the CPUs and RAM? Be helpful to know what they are.

I have a Geforce4 MX4000 with 64 MB of RAM, though I'm not sure if it fits your needs.

It has driver support up to Windows XP and some older Linux distros. It's been sitting unused in a drawer for years, so I'll need to test it before sending it out.

 

Yea that was me and it turns out it was a good thing you did too. For some reason after updating the bios to accept the q9400 the board wasn't liking the DDR3 the board had in it. Could reset the bios then enter setup (run defaults/put in specific specs for the ram) neither mattered after exiting bios for the reboot it wouldn't post. No startup beep. It would just sit at a black screen. Shut it down reset the bios again. Beep and of course it goes back into bios. Save and exit...reboot....black screen no beep. I finally said screw it and pulled the ddr3 and put in two of those ddr2 sticks you gave me and viola starts every time now. Bring the ram home and run 8 passes in mem test on each chip with no errors. Obviously there is an issue with the last bios made for the P5KC and using ddr3 or at least the G.Skill I had.

 

GiGaBite - As long as it works and is PCI, it should be wonderful!
Full height?

 

It's a half-height card with a full height backplate. I can toss it in a Windows XP box to test it if you're interested.

 

Sounds interesting. Don't know that I have ever seen one. Yes, please do check it out.

 

anyone have a 2.5" 250gb+ sataII or sataIII drive?

 

I can get ya a 500 GB Sata 3 thats virtually new, manufactured less then 6 months ago, but for those I'd have to actually sell them. I sell them through my company page for $30 but I could do $20 shipped if your cool with it. Not exactly a freebie but I sell a few every week and I don't have much reason to give away something that goes for $30 consistently every week. You can probably find others here who would do smaller older drives for close to free but just in case in a week or so no one comes through figured I'd toss the offer out. If you don't mind waiting a few weeks next time a laptop comes in for recycling I can try to grab the HDD but usually they are dead by the time they get to me so I can't promise anything

 

Are they 5400's or 7200 rpm's?

 

Does anyone have use for a Super Micro X5DPL-iGM with dual 3.2 GHz Xeons and 8 GB of ECC Registered DDR? It works fine, but I have no use for it anymore and I'd hate to see it recycled for scrap.

Shipping would be a bit of a pig because it's an EATX motherboard.

 

Does anyone have a CompactFlash (Type I) card of at least 16MB
I need two of them
Thanks

 

I have a 128MB CompactFlash card that you are welcome to if it isn't too large man.

Shoot me a PM if it would work for ya.

 

7200, Manufacture date 23 NOV 2016, SATA 3 , Seagate , its the thin one too, if that matters, Like new, we pull them from laptops and upgrade the laptops to SSD's, we're a Dell vendor so they are new from the factory laptops with less then an hour run time on our end. Cheaper to do the SSD's ourselves and we get to resell the drive VS the price we pay to have Dell do it for us

 

They just took out the gaylord of PCB to pickup. and i couldt not find any PCI card in the short time i could go through it
but i did find this one at work
http://www.ebay.com/itm/BFG-NVIDIA-...cs-Card-/182427573362?ssPageName=STRK:MESE:IT

Now if i buy it I'm payong only the half price for it. in aprociamtly 12 days the prices is going to be lowered with 30% which which i then pay half the price off.
it might even get tossed out as not valuable for resale at that time. so if you can wait 2 weeks i might be able to score this one for free +shipping