Socket A Boards - still in service?

I've got a couple old Socket A CPUs still kicking around, but my last Socket A motherboard died long ago.

Anybody want an Athlon XP 1300+? :p
 
i still have a machine running a pair of athlon MP 2000+'s on a tyan board... its a file/DHCP server for our "testing" lan @ work
 
I still have two working Socket A systems.
One is an MSI K7T Turbo with Thunderbird 1400.
The other is an Asus A7V266E with Palomino 1800+.

The 1800+ sees regular use, the other is still in working condition, but is in storage atm.
 
With the last batch of old systems I got from a friend I have now got Socket A systems ranging from During/Athlon (600+ MHz) to Athlon XP (2800+) and a Sempr0n (2800+). The latter are used as HTPC systems (fine for everything except 1080 HD content, need a better GPU).
 
My desktop is still a socket A. Lanparty NF II Ultra B, Althon XP-M 2600+ @ 2626mhz on air.

Its starting to get a little long in the tooth, making preps now for another 4-5 year build.
 
I have parts to a socket A system in a box next to me. I was using it up until a few months ago.

K7S5A ftw
 
Heh. Just dug up another Socket A machine I built years ago, at my friend's house. Still running fine.

The kicker to all of this, is that this was the system that I built using my "free" Soyo K7VME motherboard. Remember how you could buy them from Newegg or MWave for 50 bucks, and that there was a 50 dollar rebate that never materialized from Soyo? :mad:

Once I contacted MWave 6 months after that fiasco, they gave me a 50 dollar refund on my credit card. I heard the same thing happened with many folks who bought it from Newegg as well.

Good folks from both companies.
 
As someone else said... memories.

Tho I don't have them anymore

K7T Turbo 2, Held a Duron 1Ghz up to 1.2 and a Mobile 2500+ to 2.5... I think I hit 12500 on 3Dmark01 (which is a feat on an SDR board)

A7N8X, Sold it to someone, kinda wish I didn't, but It took the mobile chip up to 2750mhz...

K7 platform lasted me from 2000-2006, it was a blast.
 
I'm still using an NF7-S with an XP 2500+ Barton for my main rig :(

I really should get a job...
 
I just recently (like 2 weeks ago) retired my last socket A system - DFI Lan Party II Ultra, XP-M 2200+, with 1x512 Geil and 2x256 Kingston HyperX that had been serving duty as an HTPC. One of the best memories about that board is taking it to 250mhz fsb and beyond to impress my friends :)
 
My Epox 8RDA+ had leaky caps after only 3 years of use. Intended on recapping it until about a month ago when I tossed it. Now I got a 2500+ with no home. Does 2.2ghz no sweat.
 
I still have a couple running. One is a DFI Infinity NF2 board with a XP 3200+ in it, another is an Asus A7N8X-E Deluxe NF2 (I think) with a 2800+ in it, then I have ECS board with a 2400+ in it, and finally some other ASUS odd end board that supports both DDR and PC-133 ram with a 1600+ in it.

The XP chips were excellent in my book. I avoided the P4 all together (and continue to avoid intel outside of my macbook).
 
In the socket A days I used an AMD XP 2100+, the one with the legendary stepping, hit 2.4ghz on an ECS K7S5A i believe. Great cheap board.
 
My MSI K7N2-Delta-ILSR is still going strong with a AMD XP 3000+, 1Gig DDR333, and Leadtek 6600gt 128mb

Its about 3-4 years old, and for the 1st 2-3 years it have every game thrown at it and it played them all (days of Doom 3 :D)

Today, its dad's PC so he can play Silent Hunter II and do some word processing.
 
Still have a GA-7N400 Pro2 with 2 gigs of DDR400, a 3100+ and a X1950pro AGP. Being used mostly as a backup machine for my wife's lappy. But it sometimes gets some TF2 play when my nephew comes over. It actually is not bad with TF2, as long as you keep the res at 1280x960 and avoid 32 player servers.
 
Asus A7S8X-MX, Sempron 2500+, 1GB PC2700 RAM
MSI K7T Pro, Athlon 1.0, 384MB PC133 RAM

Both boxes running WCG 24/7 with no problems.
 
I have an extra K7N2 Delta lying around if anyone needs an extra board ;).
 
typing this from system using amd barton 2500+ (oc'd to 3200+), 1gb ddr3200 ram, albaron nforce2 mobo....
 
Still have an Asus/XP2400+ running (the old woman's machine........she doesn't know the difference:p). I've got an XP1600+ hiding somewhere in my junkpile.
 
How about an overclock athlon 900 in a Asus A7V, with 384mb of pc-133.

That combined with a MX400 makes a decent video box, no skips or lags LOL...

Yup I have a few 2500 mobiles around just gathering dust as well but that board won't take em'...
 
Still have a Athlon 2200+ T-bred running in my room on a ECS NF2U that replaced my old Asus board that fried. And my roommates old lady is using my older T-bird 1.4Ghz on an Asus A7N8X Deluxe. I've been thinking of swapping the boards out, but don't really need to O/C since both boxes just browse and occasionally serve files.
 
I have an extra K7N2 Delta lying around if anyone needs an extra board ;).

*raises hand* lol

I could use it to throw together a folding machine or give it to my aunt so she could use the google on the internets.
 
I'd still have one running if I hadn't had 2 mainboards die on me. I have a habit of pulling the old board, CPUs, and ram from my main rig and installing them in my server box. It's pretty much just a file server for one user, so it doesn't need a lot of power.
Before my last CPU change my main rig was a dual socket A board (2x 2500+ hacked to MP 2600+). Apparently I overloaded it with cards, as the main power connector got a bit crispy. It might have been repairable, but I just upgraded to an Opteron system, reused the ram, and gave away the CPUs. I did fix the PSU though. If it hadn't fried it would be in my server box now.
I had an AXP board running in my server box for a couple weeks I pulled out of this iMac I converted into a PC (CRT iMac, gutted it, installed LCD, put mATX board where the rest of the tube used to be). Alas, it had bad caps. That was an annoying couple of weeks. The AXP board replaced a dual P3 1.0 out of my previous main rig, which suffered a random heatsink clip failure. The Intel retail heatsink clip just snapped off after about 5 years in service. Replaced with a cheap 939 board & $60 3200+, which I'll probably continue using until I do another main rig build or it dies.
 
Hah, I still used a DFI Infinity Nf2 until I broke it somehow a few weeks ago. I'm stuck on a crappy dell until i can replace or upgrade.
 
I've got a Epox 8RDA+ thats been running for almost 6 years now that refuses to die. Its got a Barton running @ 2.6Ghz in it.

Out of the 10 or so mobos I've had over the years this thing is by far the most solid board I've ever owned...


RiP Epox
 
I still have couple of socket A processors, but all my socket A motherboards have gone to silicon heaven.
 
Still got a few socket As running. One with 2500xp mobile@2.6ghz with 2gb ddr and 7800gs. Another one with a mobile 2500xp at 2.4ghz with 2gb ddr with ati x850 256mb. Still run the games decently. Even a lot of the newer games play alright. I have a few more back up abit and msi socket A motherboards also ;). A lot of games are gpu limited more than cpu these days anyways. Just have a decent video card and any game should run pretty good. I mainly keep these comps for friends that want to come over and lan ;). Athlon xp's are still pretty good.
 
what is this lan you speak of? lol ;)

i haven't done that since i had my twin XP->MP 2.4ghz rig! memories of running a full quake 3 server while playing BF at the same time with no lag...
 
I still have a Socket A in service in my pfsense box. Its a Duron 800mhz with 512MB ram, 80gb hdd on a old soyo board. Plenty fast for a firewall. Im wondering around how many watts it would use?
 
Still have one running in my sons room, MSI & 2200+....tho it has been having some issues.
 
Is there a decent resale demand for Socket A boards?

The common 'board croaked but still have cpu' theme made me wonder so I checked out eBay.

Bottom line - if you've got a pretty well known board there's a good chance of selling it.
 
I just installed an XP 2600+ in a friend's Compaq system that had an older chip in it. We took it from 1.56 ghz to 2.13 ghz and noticed quite an increase in performance. Next he's installing 1 GB of inexpensive DDR400 ram in it we got off Newegg ($25+/-) to replace the 512 mb in there now. He got the machine for free from another friend who worked at a school that was upgrading systems. They gave it to him and he donated it to my buddy. He's on SS disability and so does not have a lot of $$$ to buy a new system. We got the XP 2600+ from a fellow in China for $43 including shipping so all told we upgraded my bud's system for $68. It will do him nicely until he can save some cash for a nicer setup.
 
I still have a Socket A 800MHz Athlon T-bird (OCed to 1GHz) as a test system at home. At work, about half of our computers are still Socket A.
 
I still have an 7+ year old Abit KT7A system with a 950 T-bird going fine, it's dusty as hell though. I'm thinking about giving it away to a family member who still uses something like an ancient 400mhz PIII.:eek:
 
Two running semi-actively.

One is an old NF1 micro-ATX MB, with an underclocked/volted XP-M and 2G memory. This is my low-power laptop surrogate that fits in the back seat and is used when storm chasing.

The other is an NF7, also with an XP-M at ~2.3GHz. Add an old X800XT Vidcard, and 2Gig. It still goes well and drives older games at 1280x just fine with most filtering effects enabled.

Recently gave away my trusty A7N8X setup to a needy old fellow.
 
I still have one - an Athlon XP 2400+ in a DFI nForce2 motherboard, with 1 gig of dual-channel DDR400 and a 128 MB 6800 AGP. It's never hiccuped in all the years it's been in use - I think it's still running the original 420 watt Enlight power supply - and has proven itself as a capable little LAN party rig (my two faster systems are a workstation and a media server that don't leave the house), but the last round of Source engine games have finally been enough to bring it to its knees. I'll probably give the system to my mom later this year, and seek to build the cheapest "well, technically it's faster" LAN rig possible. :)
 
DFI Lanparty NF2 Ultra rev b with axp-m2500@2300mhz with 2gb of ddr3200 and a x1950GT is still my daily rig. I just finished up Crysis warhead the other day in fact. One of the hard drives in my raid0 array started whirring and clicking on boot the other day, which means it may finally be time for a significant upgrade. Its sad, I've been running this basic config for about 6 years now. I did take the watercooling off in 2005 though, lol.
 
I have a mobile barton 2600 running at 2.5GHz in my smoothwall box on a Shuttle FN41 motherboard in an SN45G XPC. Love that little thing :)
 
Back
Top