• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Single Res - dual pump.

L

lopoetve

Extremely [H]
2FA
Joined
Oct 11, 2001
Messages
34,250
Corsair 1000D, dual system (10980XE + 10900k server). Air-cooling/AIO cooling on this (which was always supposed to be a temporary plan) has proven... yeah. No joy. Either I'm blocking too many PCIE slots for an air cooler that is potent enough to keep the 10900 cool... or I'm cooking the thing. Oops? Didn't do a lot of measuring here.

So, custom water it is. Looking at EKWB - do they have any reservoirs that actually would work well to feed TWO pumps? Or, should I just run two separate loops - one for each system?
 
lopoetve said:
Corsair 1000D, dual system (10980XE + 10900k server). Air-cooling/AIO cooling on this (which was always supposed to be a temporary plan) has proven... yeah. No joy. Either I'm blocking too many PCIE slots for an air cooler that is potent enough to keep the 10900 cool... or I'm cooking the thing. Oops? Didn't do a lot of measuring here.

So, custom water it is. Looking at EKWB - do they have any reservoirs that actually would work well to feed TWO pumps? Or, should I just run two separate loops - one for each system?
Click to expand...
EK has the EK-XTOP Revo Dual D5. It doesn't have a integrate res with it. You can run any rea with it that you want.
 
Those are serial- for powering one loop with two pumps, rather than two outlets. I can’t do these in serial; there’s a decent chance one or the other system could be shut off at any time, and if it’s the one powering the loop, bad juju.
 
lopoetve said:
Those are serial- for powering one loop with two pumps, rather than two outlets. I can’t do these in serial; there’s a decent chance one or the other system could be shut off at any time, and if it’s the one powering the loop, bad juju.
Click to expand...
Ah I see. I miss understood what you wanted. You probably want something like this assume. It has multiple inlets/outlets you could use.

https://www.ekwb.com/shop/ek-res-x3-250
 
If you're not stuck on EK, I would recommend the Alphacool Repack Dual D5.
 
Ok. So oddly enough, dual pumps/single res costs about the same as two separate loops. Is there a benefit to running loops through a single res?
 
If both pumps are running, it allows temperatures to average out between both loops. In the case where one loop has excess cooling capacity due to the components running under low load, it can help lower the temperature of the other loop. Downside is that one loop can't be taken offline while the other remains functional.
 
lopoetve said:
Corsair 1000D, dual system (10980XE + 10900k server). Air-cooling/AIO cooling on this (which was always supposed to be a temporary plan) has proven... yeah. No joy. Either I'm blocking too many PCIE slots for an air cooler that is potent enough to keep the 10900 cool... or I'm cooking the thing. Oops? Didn't do a lot of measuring here.

So, custom water it is. Looking at EKWB - do they have any reservoirs that actually would work well to feed TWO pumps? Or, should I just run two separate loops - one for each system?
Click to expand...
I'd probably run two separate loops just so I could service them individually. It's not like that case isn't big enough.

The Paul's Hardware guy had a series of videos a year or three ago where he built a system like you're describing in that case, and he did it with two loops and a bunch of quick connect fittings.
 
You must log in or register to reply here.
Back
Top