Show off your Heatsink thread

Tech-Daddy said:
This is the Coolermaster Hyper48 that is on my wife's FX53.

Good temps, right now @ idle it is reading 37C idle. 51C under load.

Thanks for the invite NHO!

nice man.....keepin that FX very cool, seems lik a very underrated heatsink and id also love to see the heatsink in ur system :p and no problem tech-daddy, anytime :D

soulsaver_8229 said:
thats 730 and im ordering it tomorrow from the egg i think, since their shipping is 3 days for 16 bucks or some crap........

will be pimperish
the black one is the 731 ;) newegg lists them both as 730's and i cant wait to see the pimperishness of ur system in it
 
I bought the Zalman 7700-Cu from newegg and the first thing I noticed when it arrived was how freaking heavy it is! I've since read that it exceeds the recommended weight for a heat-sink, but that never appears as an issue in this thread. Should I be concerned or just not worry about it?
 
SphincterBoy said:
I bought the Zalman 7700-Cu from newegg and the first thing I noticed when it arrived was how freaking heavy it is! I've since read that it exceeds the recommended weight for a heat-sink, but that never appears as an issue in this thread. Should I be concerned or just not worry about it?
if you tighten the screws tight, use the right backplate, and use ALL of the mobo's screw holes to the mobo, it will be fine.......no bending nothing

soulsaver
 
SphincterBoy said:
I bought the Zalman 7700-Cu from newegg and the first thing I noticed when it arrived was how freaking heavy it is! I've since read that it exceeds the recommended weight for a heat-sink, but that never appears as an issue in this thread. Should I be concerned or just not worry about it?
nah i wouldnt be worried about it as much as a tower since the zalman hugs to the mobo as opposed to the tower heatsinks hanging over ;)
 
N H O said:
the black one is the 731 ;) newegg lists them both as 730's and i cant wait to see the pimperishness of ur system in it
oh my bad, ordering it today btw! so 2-3 days from now ill have it

tho i can say i wont be putting it togheter till i get time off :p which is mon-wednesday :p

but will be posting pics and such, speicaly when my black hiper type r comes in ;)

soulsaver
 
soulsaver_8229 said:
oh my bad, ordering it today btw! so 2-3 days from now ill have it

tho i can say i wont be putting it togheter till i get time off :p which is mon-wednesday :p

but will be posting pics and such, speicaly when my black hiper type r comes in ;)

soulsaver
i hate you :p and damn you i wanna see it! :D post pics of the case itself straight outta the box too!
 
Not the best picture, but what the hell!

naerbild_swiftec_mcx_478-v.jpg


IMG_1102.jpg
 
nkasen is that fan sucking air away from the heat sink? Looks like it with the label facing outward.

Does it provide better cooling than pushing air at it?
 
starfury6 said:
nkasen is that fan sucking air away from the heat sink? Looks like it with the label facing outward.

Does it provide better cooling than pushing air at it?

Yeah, it's sucking air from the heatsink and blowing it out on the back.. I didn't really notice any big difference in the performance though this heatsink is made for blowing down into it. Both the fans (as they are different as you might notice) are low-rpm fans. I had about 60C full load with it on my oc:ed p4 and I am only using low-rpm-fans. the 120mm is an ADDA at 16dBa and the 80mm on the cpu is ADDA at 14dBa, dunno the green fan tho.

torment said:
What do you think of that Swiftech heatsink?

I think it kicks ass. Might not be worth the money I payed for it but who cares. It is alot better than the stock hsf and performs good even with low rpms. Love it!
 
knaSen said:
Not the best picture, but what the hell!
ooo a swiftey, veery nice man, i havent seen one of those in a while, and dont worry about how much u paid for it (unless you bought it recently :p ) it was good for its time and to starfury6, yes the fan is meant to suck the heat off the heatsink due to its design ;)
 
WS6 said:
Thermaltake Big Typhoon
wow.....impressive.....seems that the side panel would block off the air that the fan is blowing on the heatsink....btw how tall is it? seems as tall as the hyper 6+ (15cm)
 
N H O said:
wow.....impressive.....seems that the side panel would block off the air that the fan is blowing on the heatsink....btw how tall is it? seems as tall as the hyper 6+ (15cm)

I had to cut a hole in the side panel since it was about 1-2cm too tall. There was already a grated hole on the panel for a 92mm fan which would have been fine if the typhoon was just a bit shorter. I haven't put the side panel on yet.
 
WS6 said:
I had to cut a hole in the side panel since it was about 1-2cm too tall. There was already a grated hole on the panel for a 92mm fan which would have been fine if the typhoon was just a bit shorter. I haven't put the side panel on yet.
ah i see...damn tall heatsink :p
 
N H O said:
ooo a swiftey, veery nice man, i havent seen one of those in a while, and dont worry about how much u paid for it (unless you bought it recently :p ) it was good for its time and to starfury6, yes the fan is meant to suck the heat off the heatsink due to its design ;)

Hehe, yeah it was a while ago I saw these ones in peoples computers. I've used it ever since I bought it 2 or 3 years ago and I payed like 76 bucks for only the heatsink! It's still good, if you use the correct fan it's one of the best ones for 80/90 imo! (cept for thermalright's products). Hm, no it's made for blowing air through the heatsink. It says so in the manual atleast. ;)

Edit: I do love their northbridge hsf. It's hella kewl! Though very expensive. :(
 
knaSen said:
Hehe, yeah it was a while ago I saw these ones in peoples computers. I've used it ever since I bought it 2 or 3 years ago and I payed like 76 bucks for only the heatsink! It's still good, if you use the correct fan it's one of the best ones for 80/90 imo! (cept for thermalright's products). Hm, no it's made for blowing air through the heatsink. It says so in the manual atleast. ;)

Edit: I do love their northbridge hsf. It's hella kewl! Though very expensive. :(
yeea it was pricey and damn i thot it was made for sucking the air off, i coulda sworn that i read it here sumwhere, whelps seems that im wrong
 
N H O said:
yeea it was pricey and damn i thot it was made for sucking the air off, i coulda sworn that i read it here sumwhere, whelps seems that im wrong

Hehe, well anyways I didn't really experiance any real difference in performance since I use low rpm fans... Maybe with like delta 80cfm fans or something I would notice more difference
 
knaSen said:
Hehe, well anyways I didn't really experiance any real difference in performance since I use low rpm fans... Maybe with like delta 80cfm fans or something I would notice more difference
ah i see :p
 
someone please post pics of a heatsink that has not been previously posted~!
 
N H O said:
someone please post pics of a heatsink that has not been previously posted~!
Gimmie a few weeks to get the new garage/workshop built and I'll show you some more custom designed
sinks made from scratch. Store bought units are nice, but anyone can BUY a heatsink. :p:D
 
Heres mine, a little dusty, but i did not notice that till i loaded it on the computer.
heatsink2ds.jpg
 
the 112 cools quite well, my friends 112 cooled his athlon-xp mobile at 1.9v and 2.8 ghz and got 120F load :eek: only thing that sucks is its about 1 kg
 
ryuji said:
the 112 cools quite well, my friends 112 cooled his athlon-xp mobile at 1.9v and 2.8 ghz and got 120F load :eek: only thing that sucks is its about 1 kg
ahhh yeea it does weight alot, juss about as much as the hyper 6 :p now if someone would post up a hyper 6 :mad:
 
N H O said:
excuse me??? :eek:

Yeah bro... won one from CoolerMaster. I'm in the middle of another build, and the HSF does not fit the motif of the current build.

My next one will likely incorporate it... I have a TT Shark (good and deep) that should be able to handle this one.
:D
 
Tech-Daddy said:
Yeah bro... won one from CoolerMaster. I'm in the middle of another build, and the HSF does not fit the motif of the current build.

My next one will likely incorporate it... I have a TT Shark (good and deep) that should be able to handle this one.
:D
howd you win it from cooler master? was it a drawin thing?
 
N H O said:
howd you win it from cooler master? was it a drawin thing?

I'm in the Coolermaster Case Mod competition on their web site. That was one of the round 1 prizes. And since I made it to the top 5 in the final round, I'm currently working on my final round mod using another Hyper48 that I had picked up on sale a few months back. The 48 fits the motif for the current mod better than the Hyper6+ would.
 
My CPNS7700-Cu with my little nephew holding
Edit: Coolin my 3.0E coolin it at 45C @ 3.4 ghz stock voltage.
67129872.jpg
 
Back
Top