Show off your Heatsink thread

N H O said:
someone please post pics of a heatsink that has not been previously posted~!

Alpha PAL8150 with 53cmf fan, kept my 3000+ to 2.5Ghz s754..

now it cools a stock running 3200+ s754 hammer with no fan (120mm on side pannel)
Wires%20005.jpg
 
incomudro said:
^^^^^ what are your temps like with that HS ive away wondered how they performed?

They preform very good for the price. (sub 30 shipped) but ever since the 25 dollar XP90 came out, theres no reason to go with this one.

Temps, sub 44c under load on my nexcastle at 1.63v, on the hammer it on now it hold load temps to 39c but it not overclcoked..

quality is great, there cheap, suck air out (better for ducting hot air out of case)

but again, the XP90 beats in in all aspects...
 
wbt6wa.jpg

wbb7vo.jpg

radiator2xu.jpg


yeah, the bottom is really really crappy looking... its been sitting for a long time. i need some 120mm fans for the radiator... currently using an 8045 w/ a stealth, but i don't feel like pulling my computer out to take a pic of it. you can see it behind the etch in this pic (56k beware - 2mb or so)

made the waterblock with some 1/4" copper, a barb, some tubing, some silver solder, a blowtorch, a drillpress, and a dremel a year or two ago. used it with a 5 gallon bucket res, and it worked pretty well (got the bucket warm :p) anyways. that's my heatsinks.

the black knight always triumphs!
 
prod_dis_aerocoolp4.jpg


5700 RPM, yet it's dead silent with that TMD fan! Performs pretty well...I was afraid the famous Zalman one would be too heavy for my mobo.
 
Lol... the only thing is that it sounds like a friggin jet engine on startup (as cool as it sounds at first, it gets annoying) while the fan tries to get upto speed. It uses magnetism to spin the fan, so it takes a while for it to hit the 5700 mark.
 
noobman said:
Lol... the only thing is that it sounds like a friggin jet engine on startup (as cool as it sounds at first, it gets annoying) while the fan tries to get upto speed. It uses magnetism to spin the fan, so it takes a while for it to hit the 5700 mark.

Make an mp3 and post it :D
 
rogue_jedi said:
yeah, the bottom is really really crappy looking... its been sitting for a long time. i need some 120mm fans for the radiator... currently using an 8045 w/ a stealth, but i don't feel like pulling my computer out to take a pic of it. you can see it behind the etch in this pic (56k beware - 2mb or so)

made the waterblock with some 1/4" copper, a barb, some tubing, some silver solder, a blowtorch, a drillpress, and a dremel a year or two ago. used it with a 5 gallon bucket res, and it worked pretty well (got the bucket warm :p) anyways. that's my heatsinks.
thats nice man....but this is a heatsink thread which points to air cooling and not water...

and noobman...nice clean and simple heatsink ;)
 
does anyone else think that would make a cool start to some crazy thrash metla song? :D
 
English Neo said:
Sounds like a blimin air raid siren!!!

I'll post my new Heatsnk here tomorrow when i get it... Haven't got my CPU or Mobo yet, awaiting my X1800XT before i buy the cpu (maybe even cheaper than now)... YEAH BABY!!!
sweet....looking forward to it
 
Okay - it arrived today!!! Looks awsome and is SILENT at low RPM and still performs well. Will try and get my machine to work as quietly as possible.

Look at this baby!!!
DSCN2436.jpg


More Pics Here

I'll post some more pics when i get the rest of my PC together...

neo out
 
Well, nothing extraordinary for me... so no pics.

Main rig (XP 2600+ @ 2.5):
currently: SP-97 + Panaflo High 92mm
soon: DD RBX

HTPC (SB75G w/ P4 2.4ghz):
Shuttle ICE, stock.
MicroCool Northpole northbridge cooler

Soon to be server, Tbird 1.333
SP-97 from main rig
Zalman NB47J northbridge cooler

Soon to be other PC, XP 2500+
Thermalright SI-97 w/ Panaflo Medium 92mm
 
Dillusion said:
is that made to fit inside a special case?
Not sure, but i can fit it in mine, although it's a very wide case so the size of it doesn't matter to me.

neo out
 
English Neo said:
Okay - it arrived today!!! Looks awsome and is SILENT at low RPM and still performs well. Will try and get my machine to work as quietly as possible.

Look at this baby!!!

More Pics Here

I'll post some more pics when i get the rest of my PC together...

neo out
damn that hoe looks clean!!! wats it gonna be cooling? and how much did it cost?

jeece said:
Well, nothing extraordinary for me... so no pics.

Soon to be server, Tbird 1.333
SP-97 from main rig
Zalman NB47J northbridge cooler
how does the SP-97 cool ur t-bird? wat temps are u gettin idle/load?
 
That Akasa Evo120 looks very much like a Thermaltake. The mounting bracket, the poor base finish, the press-fitted heatpipes... it all screams Tt.
 
_Korruption_ said:
That Akasa Evo120 looks very much like a Thermaltake. The mounting bracket, the poor base finish, the press-fitted heatpipes... it all screams Tt.
I don't really care if it is a Tt design, the reviews show it's good, and able to run SILENT which is what i'm interrested in...
N H O said:
Damn that hoe looks clean!!! wats it gonna be cooling? and how much did it cost?

It's about £35 - £40 in shops but i picked it up off ebay for £28 shipped. The guy sold it because it didn't fit his case... oh well, his bad luck and my good fortune. :D

It's suprising that it doesn't weigh much, well, it doesn't feel like it will strain the motherboard mounted vertically, not as much as the coolermaster or the ninja scythe look like...

It's going to be cooling either a 3200+ or an X2 3800. Just depends on what the prices are when i get my X1800XT. Until i get my GFX card, i'm not buying any CPU's or motherboards (as they may come down in a month...)
Currently i can get the X2 3800 for £227 shipped and the 3200+ is about £100.
Motherboard i'm looking into getting a lot is the Abit AX8 v2.0 (for x2 support) - has a passive NB cooler plus i like Abit, last 3-4 boards have all been Abit and no problems... :D

neo out
 
N H O said:
how does the SP-97 cool ur t-bird? wat temps are u gettin idle/load?

Dunno it's not installed yet. It's currently on my XP-M 2600+ @ 2.5ghz, 1.75V.

Idle: 43°C
Load: 49°C

In the hot summer days it's more like 48/55°C.

Meguess T-Birds temps should be a little lower than that with this cooler.
 
N H O said:
lol i bet you do....btw wat kinda fan is that you got there and wat temps are u gettin with the xp120?
It's a Panaflo alright. Around 100CFM; don't remember the exact value.
Termps are great. P4 Prescott overclocked by 700mhz, Idle.

Ambient: 29c, CPU: 36c
Ambient: 25c, CPU: 32c
Ambient: 26c, CPU: 33c
 
time for some XP120 and Zalman VF700CU glamour shots!

100_0842.sized.jpg


100_0845.sized.jpg


100B0900.sized.jpg


100B0910.sized.jpg


100B0880.sized.jpg


100B0890.sized.jpg


go go panaflo 120x38mm fan. this xp120 keeps my 3000+ happy at a mear 26ºC load at stock speeds, and around 40ºC at 295x9 1.65v.

and as for the zalman, i got plans for this cooler, something along the lines of upgrading the stock fan to a tri-blade delta. :D
 
Nice thermalrights, decided to go the ebay route with a Dell 8400 HS for $7.

idle is 35
load is 49
100_0474.JPG
 
a dell retainer that I got off a motherboard purchase from ebay, actually is really sturdy and simple to install sink on.
ret.jpg
 
noobman said:
prod_dis_aerocoolp4.jpg


5700 RPM, yet it's dead silent with that TMD fan! Performs pretty well...I was afraid the famous Zalman one would be too heavy for my mobo.

I have one of those. Sounds like a 747 at take off when its at full speed.
:)
 
Heres some more Dell luvin. Smaller XP90 wannabe, but it seems to work well with the 3.2 P4 under it..
DellHS001.jpg

DellHS003.jpg


Heres a big honken thing I still dont know what im going to do with it...
its 12'x12'
BigHS1.jpg

BigHS2.jpg
 
Currently i have a zalman vf700 CU2 on my X800 pro vivo and an XP90 with an aluminum 92mm fan on my cpu. ill post some pictures of those when i take them...

for now heres a pic of the lapped 1U CPU cooler that i used to have on my 9800 pro back in the day. and then for fun a picture of the kingwin heatpipe i had on the PNY 6800nu that i used to have.

Picture-011.jpg


PNY-6800.jpg


also here is a 9700 pro i used to have
imagen.php


and a 6800GT i used to have
NV5-top.jpg



I will also try to find a pic of the SP97 that i had on my mobile 2500+ that allowed it to run at 2.73ghz on air :cool:
 
Heatsink.jpg

little bit of stock hsf lovin, this is how the hsf for my venice looks, although now i'm water cooled, so that hsf is just a paperweight lol
 
pcbliss i like the look of your cards! they are VERY NICE! also, Killa Bee, i wonder how good that XP90 wanna be would work in a passively cooled SFF rig.
 
I(illa Bee said:
Heres a big honken thing I still dont know what im going to do with it...
its 12'x12'
BigHS1.jpg

i think you mean 12"x12" ;)
but that is still a big chunk of aluminum... get a few more pieces like that and you can make a custom passively cooled sff case kind of like the zalman TNN 500 case
 
Back
Top