Shin-Etsu X23-7783D

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260662311336&ssPageName=STRK:MESOX:IT

Great deal for Shin-Etsu. Best price on the web actually. 7.49 shipped

This guy sells .5 gram syringes as well 5.49 shipped

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260662313247&ssPageName=STRK:MESOX:IT

Only 10 cents more for shipping when ordering extra

You can get the G-751 Shin-etsu for $4 shipped at svc, it's pretty much the same but not quite as good like 98% as good. If you buy two it is only $6

I bought some but the shin-etsu is hard to spread. I prefer arctic ceramique a lot easier to apply.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
Geild GC Extreme worth every extra penny it costs.

18 C off stock intel cooler.

chart.jpg


Not to rob the thread. Just feel that Gelid provides better performance for your dollar. Especially if your going for those last extra MHZ. which is what this stuff is designed for. Those of us whom push our machines.

GELID_gc-extreme_010.jpg
 
Last edited:
Geild GC Extreme worth every extra penny it costs.

18 C off stock intel cooler.

chart.jpg


Not to rob the thread. Just feel that Gelid provides better performance for your dollar. Especially if your going for those last extra MHZ. which is what this stuff is designed for. Those of us whom push our machines.

GELID_gc-extreme_010.jpg

And what about MX-3 which beats the GCX in that chart?
 
And what about MX-3 which beats the GCX in that chart?
That's a bad test. The other chart isn't showing, but you can follow this link for 80 TIMS compaired.

MX-3 isn't even in the A category. It's much thicker then the counterparts also.

No matter where you pull a review the results always very. So you can't really get a true science lab test on the stuff, but for spread ability and performance/value I'm now going with Gelid GC Extreme as many others are changing over to it in the extreme performance market. So its to personal preference really. Those of us that are packing $5000+ into a computer tower don't really care about a couple bucks in TIM though. LOL

The Shin-Etsu MicroSi G751 above only cools .1C difference under GC Extreme and is thicker to spread. So for ease of use many choose the GC over the Shin. Then you have the Arctic Silver 5 also which is rated at the same cooling as Shin-Etsu MicroSi G751 but has the application set in.

The OP Shin-Etsu MicroSi X-23 7783D cools .1 over the GC and is also moderate on viscosity so is also not as easy to spread as GC. so it all boils down the penny's and the hassle you want to spend trying to get thicker stuff to spread nicely on your heatspreaders.
 
Last edited:
The differences between all those compounds are so small that you really have to wonder how much a slightly-less-than-perfect application would affect the results. The difference between a "D" and an "A" is basically +1C - it seems to me that the true conclusion of the review is that the kind of thermal paste you buy does not matter.
 
That's a bad test. The other chart isn't showing, but you can follow this link for 80 TIMS compaired.

MX-3 isn't even in the A category. It's much thicker then the counterparts also.

No matter where you pull a review the results always very. So you can't really get a true science lab test on the stuff, but for spread ability and performance/value I'm now going with Gelid GC Extreme as many others are changing over to it in the extreme performance market. So its to personal preference really. Those of us that are packing $5000+ into a computer tower don't really care about a couple bucks in TIM though. LOL

The Shin-Etsu MicroSi G751 above only cools .1C difference under GC Extreme and is thicker to spread. So for ease of use many choose the GC over the Shin. Then you have the Arctic Silver 5 also which is rated at the same cooling as Shin-Etsu MicroSi G751 but has the application set in.

The OP Shin-Etsu MicroSi X-23 7783D cools .1 over the GC and is also moderate on viscosity so is also not as easy to spread as GC. so it all boils down the penny's and the hassle you want to spend trying to get thicker stuff to spread nicely on your heatspreaders.
Sweet from that review the g-751 came out best! and its cheap! Too bad I don't use it except on small dies, it's too hard to spread evenly across a big processor.
 
Sweet from that review the g-751 came out best! and its cheap! Too bad I don't use it except on small dies, it's too hard to spread evenly across a big processor.
Exactly the point! To save a few bucks to get something that spreads like ass makes no sense.

:rolleyes:
 
Exactly the point! To save a few bucks to get something that spreads like ass makes no sense.

:rolleyes:

Depends on what you are going to use it on, for stuff like northbridge or delided processor it would be better. It all depends on application.
 
You can get the G-751 Shin-etsu for $4 shipped at svc, it's pretty much the same but not quite as good like 98% as good. If you buy two it is only $6

I bought some but the shin-etsu is hard to spread. I prefer arctic ceramique a lot easier to apply.

Let say with no compound your overclocked CPU is @ 70C. WIth G751 you get 65C. With X23 you get 63C. Does the math equate to 98% of the performance? For G751 to be 98% of X23 it has to be .1 C warmer. It's more like 75~80% of the performance if you compare multiple review sites

Ceramique isn't even in the same category. I have some on hand as well.

Spreading shouldn't be a problem if you follow simple guides. It's not like you spread thermal compound everyday. At least I hope not. I'm using it right now and it dropped 2-3 C over any other compound I've tried.


SE X23-7783D bests all thermal compound period. This has been proven over and over again with multiple review sites consistently leading to the same conclusion. IC diamond comes close but X23 still bests consistently. Indigo Extreme is the only TIM that bests x23 but then again Indigo is not your every day grease.

Hardocp did a review on X23-7783D.

1236043439L0bdV188X7_4_3.png
 
Last edited:
Geez, I guess I should be getting with the program. I feel like and old skool fool with my AS#5. Of course my Phenom2 x4 is idling at 3.9ghz at 25C. GPU1 = 31C GPU2 = 33C. ..and I'm running a CPU HSK that I bought circa 2005.
 
Geez, I guess I should be getting with the program. I feel like and old skool fool with my AS#5. Of course my Phenom2 x4 is idling at 3.9ghz at 25C. GPU1 = 31C GPU2 = 33C. ..and I'm running a CPU HSK that I bought circa 2005.

lol I have AS3 on my Phenom right now.. Though I finally finished off the big ass thing of it I bought back when as3 was new.
 
The OP Shin-Etsu MicroSi X-23 7783D cools .1 over the GC and is also moderate on viscosity so is also not as easy to spread as GC. so it all boils down the penny's and the hassle you want to spend trying to get thicker stuff to spread nicely on your heatspreaders.

It's called place the TIM tube into a plastic bag with hot water running over it or dipped into boiling water. Pretty simple if you're really concerned with how hard it is to spread... They are also noted as being the same viscosity in the 80 TIM review.
 
It's called place the TIM tube into a plastic bag with hot water running over it or dipped into boiling water. Pretty simple if you're really concerned with how hard it is to spread... They are also noted as being the same viscosity in the 80 TIM review.

My eyes must be bad because I'm reading Moderate to Low/thin. HMMM.
 
I have some shin etsu on my set up right now. I dont remember what it is but I do remember it was a PITA to spread.
 
guys, it's not playdoh. a cross on the CPU and take a clean utility razor blade or disposable BIC. Be a man and apply more than 5 lbs or pressure.

EDIT: To keep this on topic: You're not going to be applying thermal paste more than once every year or so. Therefor, the extra thermal performance that this paste provides is worth the money.
 
Last edited:
I switched to OCZ Freeze because its ridiculously cheap and in every performance review I've read it has done well. The difference between the #1 and #25 TIM is probably 3 degrees and since its an unscientific process nearly impossible to repeat perfectly between applications or products its well within the margin of error. I've always gotten what is reviewed well and what is reasonably priced for a number of uses. Of course if you spend $20 on an application of TIM you probably need to flaunt your epeen, so that is where these arguments always seem to begin and end.
 
It's not scientific I agree but when certain thermal compound constantly is in top 3 every review out there you can't deny performance is superior. Thermal paste is cheap you apply maybe once or twice a year if you are an upgrade addict and less frequent for others.

SummarySupplement.png


You could get away with buying cheaper $20 coolers to overclock your CPU with applying a good thermal paste and still push the processor. 3-5 C is the difference between middle of the road and high end air coolers anyway.

I've tried many different paste.including AC ceramique, AC silver, MX2, OCZ Freeze, cheap white goop from radio shack, SE x23-7783D, and some others in between. SE x23-7783D constantly gets much better results out of all I tried. Also OCZ is the worst paste far as value goes and I couldn't notice any difference from other paste. The 3 gram tube lasted me less than 3 to 4 applications of GPU and CPU.
 
people still spread out their TIM? don't you guys read instructions? you put a drop and clamp it in (every TIM i've ever used has said this). after your machine powers on and heats up, the TIM spreads out evenly.

just look at the pictures here (the instructions in the article aren't particularly useful)

http://benchmarkreviews.com/index.p...sk=view&id=150&Itemid=62&limit=1&limitstart=4

look at the type of coverage you get from just pressing down on the cooler (not clamped in). clamped in and heated up, you should be getting great coverage, without any spreading at all.
 
I use this stuff all the time and I just bought more from Performance-pcs.com/PetrasTech Shop. Both have 1 gram tubes for around $9.

I apply a drop of it in the middle of the cpu and let the HSF/block spread it out.
Zero cure time. You get the the lowest temps your setup can produce from boot up. If I start with 36C idle, I will maintain 36C idle.
I wouldn't use anything else.
 
Last edited:
This is a real high quality TIM.
You just need to preheat it before application.
Worked well with a Megahalem to get a no fuss 4.0ghz+ OC.
 
If Indigo was a bit cheaper I'd be all over it. $20+ for 2 applications. Too rich 4 my blood.

i use indigo extreme on my wc builds since I rarely remove the heat sink after installation. When spending $50 extra on a WB that gives you 5 degree cooler temps then the ell cheapo block why wouldn't you spring $20 and get the last few degrees out of your system?

But I resort to shin etsu or ceramique on most of my builds.
 
i use indigo extreme on my wc builds since I rarely remove the heat sink after installation. When spending $50 extra on a WB that gives you 5 degree cooler temps then the ell cheapo block why wouldn't you spring $20 and get the last few degrees out of your system?

The problem is that some of us change parts like every month (or sooner). It's an addiction in which I am seeking therapy. :eek:
 
maybe some parts but there hasn't been a worthy upgrade for an i7 920 in over a year now lol.
 
I ordered one syringe from this deal, then saw some at Fry's and bought one syringe from there (at a considerably higher price.. but I couldn't wait). I admit I didn't heed the pre-heat suggestion, as I figured it couldn't be that bad. So I cleaned off the AS5 from my CM Hyper 212 Plus and proceeded to apply the Shin-Etsu.

Forty-five minutes and 0.2g later...

FUCK ME. This heatsink is NEVER going to come off after this!!! :mad:

:p
 
People don't listen. Such a shame. LOL To each their own though, but to baby site a little tube in some water is pathetic for 0.10C difference in temp. Notice that isn't a 1.0C its a 10th. Located in the 80 TIM review for the difference in GC over Shin "Tar"shu. That also depends on which Shin you used too for the temp comparison. Their highest rated one in the test is .10C better then GC, but for the ability to just spread and go its well worth it. AC has a 200 hour burn in or something nuts before it works to its proper properties. Which is also a rediculous hassle. To each their own though.

I think most people just go with what everyone says is best and are affraid to try something new. I just ran into this stuff a few weeks ago online and searched for a retailer that I have delt with before (NOT everyone carries the Gelid GC-Extreme)ordered it and couldn't be happier by its properties and ability to perform over other TIMS I have used.
 
LOL Y U MAD THO?

Are you a GC distributor? This is a deal thread for Shin Etsu TIM, if you want to preach about GC go make your own Deal Thread for it...
 
No idea if this is a good deal or not, I've still got quite a bit of AS 5 and Ceramique sitting around. Unless pushing the limits, the extra ~1c ain't much of a concern.

maybe some parts but there hasn't been a worthy upgrade for an i7 920 in over a year now lol.

More like "over 1.5 years" or else closer to two years than just one eh? I remember passing on i7 920 and holding out for i7 860. What a waste of time lol. A good portion of what I saved on CPU/mobo pricing, I gave right back on low latency RAM as prices skyrocketed from ~March/April to Sept/Oct of '09. All told, I've got 8GB of fast RAM and great temps/idle power draw, but for a mere $100 more, people like me who waited for Lynnfield coulda had an i7 920 w/ 12GB of mildly slower RAM and spent an extra ~5-6 months using it. Patience ain't always the winner.
 
Thanks for the link OP. Been wanting to try this stuff. 12.60 for 2g seems fair.
 
people still spread out their TIM? don't you guys read instructions? you put a drop and clamp it in (every TIM i've ever used has said this). after your machine powers on and heats up, the TIM spreads out evenly. .
NoNRG said:
Why is everyone talking about spreading... Its been proven that spreading creates air bubbles. Line method with spreading done by heatsink ftw.

People have probably seen the chart on this page:
http://enthusiast.hardocp.com/article/2009/04/07/thermal_paste_shootout_q209/3
edit: all the shin etsu's get better temps after spreading a thin layer in those findings. Most other pastes are better with a drop in the middle

I usually do a drop or a cross, unless there's no heatspreader.
 
I'd just watch the fs/ft forum for someone to buy a large batch and sell them.
I got 10 of these syringes for 1.99 each from someone on the forums a year ago.

Eat that, fleabay.
 
Placing the TIM in water is not for a temp drop, it's for the TIM to spread easier and evenly when installing the HSF.
 
I'd just watch the fs/ft forum for someone to buy a large batch and sell them.
I got 10 of these syringes for 1.99 each from someone on the forums a year ago.

Eat that, fleabay.

Let me know where I can get them for $1.99. I even contacted MicroSI and they want something like $3+ range for high volume.
 
Let me know where I can get them for $1.99. I even contacted MicroSI and they want something like $3+ range for high volume.

i managed to get in on that deal as well. the person had purchased them in person in japan and brought them back. hence the cheap price.
 
Back
Top