AirPower4ever
Limp Gawd
- Joined
- Dec 20, 2009
- Messages
- 131
So I cannot put two and two together. So reading Kyle's article about SSD's and how the data was charted by using a single SSd, RAID with 2, RAID with 3 and RAID with 4. I read it and saw that the 4 drive set up gets close to 700MB/s, but this number is strictly what the drives can pump out correct?
Then I was looking at the X58 boards that have the ICH10R, but I am reading that the SATAII connection has a max. bandwidth of 300MB/s. So if one is to RAID 4 SSD's, they would not get the 700MB/s spec correct? They would only get 300MB/s which is the max. (if they used the exact set up in Kyle's article)
I am contemplating this because I am getting ready to make a build with two SSD's and wonder if I should RAID them just for fun. But if the data will hit just 300MB/s, then I will not play with the set up that much.
So am I right then, it will max out at 300MB/s no matter how many drives I RAID together? Just wondering guys.
Then I was looking at the X58 boards that have the ICH10R, but I am reading that the SATAII connection has a max. bandwidth of 300MB/s. So if one is to RAID 4 SSD's, they would not get the 700MB/s spec correct? They would only get 300MB/s which is the max. (if they used the exact set up in Kyle's article)
I am contemplating this because I am getting ready to make a build with two SSD's and wonder if I should RAID them just for fun. But if the data will hit just 300MB/s, then I will not play with the set up that much.
So am I right then, it will max out at 300MB/s no matter how many drives I RAID together? Just wondering guys.