Question scratchng my brain

AirPower4ever

Limp Gawd
Joined
Dec 20, 2009
Messages
131
So I cannot put two and two together. So reading Kyle's article about SSD's and how the data was charted by using a single SSd, RAID with 2, RAID with 3 and RAID with 4. I read it and saw that the 4 drive set up gets close to 700MB/s, but this number is strictly what the drives can pump out correct?

Then I was looking at the X58 boards that have the ICH10R, but I am reading that the SATAII connection has a max. bandwidth of 300MB/s. So if one is to RAID 4 SSD's, they would not get the 700MB/s spec correct? They would only get 300MB/s which is the max. (if they used the exact set up in Kyle's article)

I am contemplating this because I am getting ready to make a build with two SSD's and wonder if I should RAID them just for fun. But if the data will hit just 300MB/s, then I will not play with the set up that much.

So am I right then, it will max out at 300MB/s no matter how many drives I RAID together? Just wondering guys.
 
Its 300 MB / per SATA port. But then I am not sure how many lanes are allocated to all 6 ICH10 SATA ports. Hopefully there are at least 2 PCIe 2.0 lanes. Remember a single PCIe 1.0 lane has a 250MB/s bandwidth limit. PCIe 2.0 doubles this speed to 500 MB/s. 2 of these are 1GB /s.

Edit: Wikipedia tells me the ICH10 southbridge chip has 4 PCIe 2.0 lanes or 2GB /s but that is shared with everything on the southbridge.

http://en.wikipedia.org/wiki/Intel_X58
 
That is what I was missing, the ports. 300MB/s per port. Thanks and thanks to OH, the cap. Thanks guys, I know I can rely on [H] forums for answers.
 
Back
Top