Overclocking Fx-6300

P

papakaliati

n00b
Joined
May 10, 2013
Messages
5
I have done not hard overclock on my FX-6300, 4.400 Ghz with +0.050 V from bios ( Motherboard is Gigabyte 990X UD3) and cpu says 1.416 Vcore. After running Amd's overdrive stress test for 1 hour my temps max at about ~56 C +- . Temperature is 25+ if that is of any imprortance. Is temperature, voltage safe for everyday use?
 
Voltage looks kind of high, but your temps aren't too bad. Do a IBT run on it and see what it goes up to then.
 
Also i have atm LLC at auto and shows 100%. Should i change that setting?

I cant really find how to disable LLC. Settings are extreme, high , very high, regular and normal :S
 
Last edited:
'normal' is probably as close to 'off' as you will get, but you definately want some sort of LLC.
 
Went lower on Voltage, i am now at 1.380-1.392 and 4.3 Ghz. Dont like the temperatures i see when i increase votage at 1.41 or 1.44 ( Around 58 during stress test) so i lowered it a notch. I sit now at ~52 degrees during stress tests.
 
On nearly stock voltage ( 1.356 V ) i can overclock to 4.21 :S. From the look of it, every 0.025 Core Voltage adds about 3 degress on stress test . Which temperature is considered safe?
 
Last edited:
You must log in or register to reply here.
Back
Top