• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Overclocking Fx-6300

P

papakaliati

n00b
Joined
May 10, 2013
Messages
5
I have done not hard overclock on my FX-6300, 4.400 Ghz with +0.050 V from bios ( Motherboard is Gigabyte 990X UD3) and cpu says 1.416 Vcore. After running Amd's overdrive stress test for 1 hour my temps max at about ~56 C +- . Temperature is 25+ if that is of any imprortance. Is temperature, voltage safe for everyday use?
 
Voltage looks kind of high, but your temps aren't too bad. Do a IBT run on it and see what it goes up to then.
 
Also i have atm LLC at auto and shows 100%. Should i change that setting?

I cant really find how to disable LLC. Settings are extreme, high , very high, regular and normal :S
 
Last edited:
'normal' is probably as close to 'off' as you will get, but you definately want some sort of LLC.
 
Went lower on Voltage, i am now at 1.380-1.392 and 4.3 Ghz. Dont like the temperatures i see when i increase votage at 1.41 or 1.44 ( Around 58 during stress test) so i lowered it a notch. I sit now at ~52 degrees during stress tests.
 
On nearly stock voltage ( 1.356 V ) i can overclock to 4.21 :S. From the look of it, every 0.025 Core Voltage adds about 3 degress on stress test . Which temperature is considered safe?
 
Last edited:
You must log in or register to reply here.
Back
Top