Old CPU + new Mobo: What RAM?

copperfox

n00b
Joined
Apr 24, 2009
Messages
8
I have not built a system in 5+ years, and never used Intel processors. Since I come from the ancient world of AMD Athlon XP processors and DDR1, what kind of memory do I buy for this setup?

I want to use a P4 2.8GHz /1mb/800 that I got for free from work. I am going to buy a LGA775 motherboard so that I can use the P4 for now and upgrade to a Core 2 Duo/Quad in a year or two.

The mobo: Gigabyte GA-EP45-UD3L link
I will be running XP SP3 (32bit).

From what I've gathered, this P4's "800" rated FSB is really quad pumped, so the mobo would be running a true FSB of 200MHz. The mobo I'm buying only supports DDR2, so for now, I think the minimum I need is DDR2 400, but I've heard that it is slow and not worth it. So if I buy DDR2 800, won't it be significantly underclocked at only 400MHz? What the heck is this 1:1 thing I've been reading?

To make matters more confusing, if I want to O/C the P4 to ~250 FSB, that will put the CPU in the realm of 3.5GHz, and the memory at 500MHz. But this is still less than the DDR2 800 is capable of. Is DDR2 800 a waste of money?
 
Go for the ddr2 800 will still work and be cheap. As long as the cpu is lga 775 you will have no problems at all.
 
Last edited:
. As long as the cpu is lga 775 you will have no problems at all.
Some boards BIOS will not support the older socket 775 CPU. Check with the manufacturer before you buy.

Also, the advice for PC6400 is a good idea. It's so cheap right now, there's no reason to buy anything slower.
 
Now, if I get a new Core 2 (duo/quad) in the future that uses, say, a 333FSB ("1333MT/s"), and I wish to over clock to, lets's say, 425MHz FSB, then won't I need DDR2 capable of 850MHz or better?

What I'm getting at is: For now I can buy a cheap stick of 2GB DDR2 800 to use with my P4, and then in the future when I buy a faster CPU, then I could buy 4GB of DDR1000 or 1066 so I have room for overclocking. Does this all sound correct?

I still don't understand this 1:1 ratio thing...
 
This should help out:

Stated FSB/4 = Actual FSB
Actual FSB x 4 = Stated FSB
Multiplier x Actual FSB = CPU Speed
1:1 Ratio: 2 x Actual FSB = RAM Speed
1:1 Ratio: FSB = 1/2 RAM speed
1:1 Ratio: DRAM = 1/2 RAM Speed
Note that C2D systems don't see a performance increase or decrease with any ratio higher than 1:1

E5200:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
12.5 × 200Mhz, 800Mhz, DDR2-400 = 2.50Ghz <<== Stock speeds
12.5 × 266Mhz, 1066Mhz, DDR2-533 = 3.32Ghz <<== Easy OC
12.5 × 300Mhz, 1200Mhz, DDR2-600 = 3.75Ghz <<== Excellent OC

E7400:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
10.5 × 266Mhz, 1066Mhz, DDR2-533 = 2.8Ghz <<== Stock speeds
10.5 X 333Mhz, 1333Mhz, DDR2-667 = 3.5Ghz <<== Excellent OC
10.5 × 400Mhz, 1600Mhz, DDR2-800 = 4.2Ghz <<== If you're extremely luckly

E8400:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
9 x 333Mhz, 1333Mhz, DDR2 667 RAM = 3.0Ghz <== Stock Speeds
9 x 400Mhz, 1600Mhz, DDR2 800 RAM = 3.6Ghz <== Easy OC
9 x 450Mhz, 1800Mhz, DDR2 900 RAM = 4.0Ghz <== Excellent OC
9 x 500Mhz, 2000Mhz, DDR2 1000 RAM = 4.5Ghz <== If you're EXTREMELY lucky

Q8200:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
7 × 333Mhz, 1333Mhz, DDR2 667 RAM = 2.33Ghz <<=== Stock speeds
7 × 400Mhz, 1600Mhz, DDR2 800 RAM = 2.8Ghz <<== Easy OC
7 × 425Mhz, 1600Mhz, DDR2 850 RAM = 3.0Ghz <<== Good OC

Q6600:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
9 x 266Mhz, 1066Mhz, DDR2 533 RAM = 2.4Ghz <== Stock Speeds
9 x 333Mhz, 1333Mhz, DDR2 667 RAM = 3.0Ghz <== Good OC
9 x 400Mhz, 1600Mhz, DDR2 800 RAM = 3.6Ghz <== Excellent OC, About the Max

Q9400:
Multi x Actual FSB, Stated FSB, RAM Speed = Clock Speed
8 × 333Mhz, 1333Mhz, DDR2-667 = 2.66Ghz <<== Stock speeds
8 × 400Mhz, 1600Mhz, DDR2-800 = 3.2Ghz <<== Easy OC
8 × 450Mhz, 1800Mhz, DDR2-900 = 3.6Ghz <<== Good OC
8 × 500Mhz, 2000Mhz, DDR2-1000 = 4.0Ghz <<== Excellent OC
 
Now, if I get a new Core 2 (duo/quad) in the future that uses, say, a 333FSB ("1333MT/s"), and I wish to over clock to, lets's say, 425MHz FSB, then won't I need DDR2 capable of 850MHz or better?
...

Close but DDR850, not 850mhz which would = DDR1700. DDR2-1066 is dirt cheap right now. And a set of DDR2-800 rated at CAS4 should easily do 850+ if you loosen the timings.
 
Get the fastest ram that you can. Like the post above states, 1066 is dirt cheap now. Even if it is a few more bucks than 800, it's worth it if you get a chip with a low multiplier or if you plan on extreme overclocking. I wouldn't purchase ram based on your processor. That P4 is practically worthless, but that motherboard is very good and will do you well when you upgrade to a Core2. That way you won't have to purchase ram again. As for ram, DDR2 800 will allow a Max FSB of 400 without overclocking your memory and DDR 1066 will allow max FSB of 533 (if your motherboard can hit that). It's all about headroom.
 
Back
Top