So I went with a bit of an upgrade from my Socket 754 Athlon64 3200+ to a Athlon64 Socket 939 3700+ today.
On my old Athlon64 3200+ I had taken the CPU out to redo the thermal paste and when reinstalling I somehow broke off 2 PINS on the CPU so when I tried to run the computer all lights would turn on but the power button would not turn it on or off, had to use the switch in the back, and I would get no video what so ever. So I figured this would be due to the 2 broke pins no big deal, shame on me breaking the pins.
So today I go to hookup my Athlon64 Socket 939 3700+ and my MSI K8N Neo2 Platinum motherboard (parts I got used here) and I get the exact SAME problem. I have to use the switch in the back to get it to turn on. Once on, all the lights and fins spin up as normal but I get NO picture and my power button doesn't do a thing. Now I was very careful and patient when putting these parts in so I know I installed them correctly
First I thought ok, maybe my X800XTPE videocard went bad for some reason so I throw in my Nvidia 6600GT and I get the same exact thing, no video to my moniter. I turn my moniter on and it just goes to standby mode.
If anyone could help me with suggestions on what to try I would GREATLY appreciate it. I have no idea where to start or what to try. Could it be a bad PSU? I thought if Motherboard, Ram, or CPU was bad it would't even power up...
Please help!
Thanks,
tree_
On my old Athlon64 3200+ I had taken the CPU out to redo the thermal paste and when reinstalling I somehow broke off 2 PINS on the CPU so when I tried to run the computer all lights would turn on but the power button would not turn it on or off, had to use the switch in the back, and I would get no video what so ever. So I figured this would be due to the 2 broke pins no big deal, shame on me breaking the pins.
So today I go to hookup my Athlon64 Socket 939 3700+ and my MSI K8N Neo2 Platinum motherboard (parts I got used here) and I get the exact SAME problem. I have to use the switch in the back to get it to turn on. Once on, all the lights and fins spin up as normal but I get NO picture and my power button doesn't do a thing. Now I was very careful and patient when putting these parts in so I know I installed them correctly
First I thought ok, maybe my X800XTPE videocard went bad for some reason so I throw in my Nvidia 6600GT and I get the same exact thing, no video to my moniter. I turn my moniter on and it just goes to standby mode.
If anyone could help me with suggestions on what to try I would GREATLY appreciate it. I have no idea where to start or what to try. Could it be a bad PSU? I thought if Motherboard, Ram, or CPU was bad it would't even power up...
Please help!
Thanks,
tree_