my sig 650 might be going.

no2censorship

Limp Gawd
Joined
Oct 20, 2008
Messages
393
Had it for about 2 months and possibly a week more or less; never tried to feel for exhausted air from the fan when gaming, but is it normal that the fan has basically never turned on the many times i couldn't feel air coming out since the 1st time I've used it?

CPU usage is high and has always ran unusually hot for what it is; CPU usage often goes up to 78% if you keep circling the mouse cursor around on the desktop without any tabs even in the taskbar. Every time you open something it generally uses at least 38%, sometimes as high as 84%.

If the usb ports are on the 3.3V rail and if the CPU draws a little from the 3.3V then it's definitely my psu; what draws from the 5 V rail? (perfect; only one 12V rail has been shown with asus pc probe and bios has risen to going from 12.01 to when I just checked it was 12.20, 12.23, 12.25 and went back in forth from those every 6-9 seconds, so like the tru frame rate issues described below it doesn't go back and forth rapidly more like every 6-9 seconds or so; more like 4 seconds for the tru framerate), then I'd conclude it's the psu; even if it's in spec limits (I don't know) it was no where close to perfect like it was the last time I checked in the BIOS, about 9 days ago; it's a constant 3.47V, which is about ~5% way off from what mine was and what the reviewer from johnny guru was.

I'm using a 14 gauge power cord from PC power & cooling by linetek; it came with a 16 gauge one by linetek; could somehow be getting too much current from the wall with a really thick power cord for a PSU that could would probably be fine with an 18 guage? I had to have a 14 guage one, because I'm a spec whore.

Audio seems extremely clear, consistently. DX is in last slot down, so it's very close to the sound card; is it likely that the DX would be giving EMI to the PSU?

System hardware config has been the same since i've had it.

I've heard that Antec products aren't very often DOA, but that they die early. Would the latter be likely or known to apply to the sig 650?

any details i left out, let me know. I kind of really need some help quick, if possible=] Thanks to all who reply in advance.

I'm think the reason tru's frame rate is like from like 57 occasionally then it constant changes between 45 and like 25, it basically goes back and forth from playable (as high as 57) to unplayable as low as 25; changing graphics setting makes zero difference other than the image quality of the slide show.

Possibly Slight graphics corruption, in the form of an usually shaped large horizontal (with a circle on top of it) white bar blanking. when refreshing the Hardforum page; Task bar messed up 3 days ago, but it was easilly fixable; it was an issue with dx control panel refusing to show up and it was also fucking with the task bar which could be fixed easily.

No BSODs the whole time i've had it. Does that point out that it likely isn't any other component?

last notes: in HW monitor the voltage readings and what they're for are completely unfamiliar, including the vcore messed up. I know HW monitor isn't accurate, but I have no idea what they measure, because I've never heard of them.

CPU temps are consistent between pc probe and everything else;

PC probe and the bios give me a 1.45 Vcore for my kuma, for whatever that's worth.

I don't have multi-meter, and I'm not going to use one, because I don't know that it's necessary to consider.

My 9800gtx+ is running a few deg C hotter under the same conditions and the fan speed was 31% when the temps were low. Since they jumped 3-5C the fan speed's 1st increase was to 35%, now it's to 39%. Different version of evga precision than at first.

is a later version of precision known to give different results than the version before it?
 
Had it for about 2 months and possibly a week more or less; never tried to feel for exhausted air from the fan when gaming, but is it normal that the fan has basically never turned on the many times i couldn't feel air coming out since the 1st time I've used it?

That fan should always be spinning. If it isn't, RMA the unit.

no2censorship said:
I don't have multi-meter, and I'm not going to use one, because I don't know that it's necessary to consider.

Get one. You don't need an expensive one, but it is necessary to consider if you want to know what the voltages are really doing. BIOS/software is always wrong. Always.
 
Just because you couldn't feel airflow doesn't mean the fan isn't running. Check to confirm like Oklahoma Wolf suggested.

You have no way of knowing what your true voltages are, since you didn't check them with a multimeter. ATX spec is within 5% for the +12V, +5V, and +3.3V rails and 10% for the -12V rail. Get a multimeter, check them, and see if they're in spec.

The power cord you're using has nothing to do with anything. It quite literally doesn't matter what gauge you use so long as it's sufficient for your power draw, and even an 18AWG cord would be plenty for your system.

Based on what you're describing, it doesn't sound like there's anything at all wrong with your PSU unless one of the things I listed above doesn't check out. To be honest, it doesn't seem to me like you actually have any real hardware issues. Please try to describe your issues more clearly, since based on what you're saying, it just seems like your CPU is a bit slow.
 
Thanks for helping me=] There are some changes in software since I've made my upgrades, which included the psu.

A Few more [?] though:
Could 33-35C/39% idle be as low as 31-32/35%[1] with the same case cooling at room temps of 78 F? What about 31-33/31%[2] or 35%[3]?

I know that my temps are good, but I was just concerned as to why they went up. I know the room temps have changed drastically but they were like 22-29C/31% the days it was snowy a few weeks ago with the vents closed in my room so my pc could run as cool as possible;

Also, why does the same install of the same program report lower voltages for weeks, then they report higher voltages a few weeks later? They've were a day ago when I checked, which was the first time since about 2 weeks after I bought it? In other words, even though they always report the same voltages, why do they remain constant for so long? Why don't they report constant temps if they're same program?
 
Could 33-35C/39% idle be as low as 31-32/35%[1] with the same case cooling at room temps of 78 F? What about 31-33/31%[2] or 35%[3]?
I'm not really sure what that means, but if you're talking about CPU idle temps, then ignore them. Idle readings are completely unreliable.
I know that my temps are good, but I was just concerned as to why they went up. I know the room temps have changed drastically but they were like 22-29C/31% the days it was snowy a few weeks ago with the vents closed in my room so my pc could run as cool as possible;
Again, idle temps are meaningless.
Also, why does the same install of the same program report lower voltages for weeks, then they report higher voltages a few weeks later?
Because software voltage readings from the shitty Winbond chip are not reliable, nor do they represent the actual voltages coming from the PSU. Hence why you should get a multimeter to test voltages with.
 
Thanks=] It was GPU temps in evga precision.
Well, the behaviour you described still doesn't seem all that abnormal to me. Temperature fluctuations are normal and can be caused by any number of things. You should only be concerned if temperatures start becoming really excessively high, and even then you should look primarily at load temps and not really at idle.
 
I'm going to go with corsair once I've made up my mind between which one to get. Any suggestions are welcome and appreciated; I'm going to check back here right before I've done my other research, then make up my mind.

I can basically conclude this thread for now, but if, for some reason I do have any other questions, I'll come back to this thread, so I won't have to make another one. I'll let you know, if, after I replace this Antec sig 650, and I have further trouble, like severe random desktop graphic corruption (which I didn't have when I first got this psu, when it seemed normal); if cpu usage isn't like it was when I first got this sig 650, then I'm going to be more open to advice. I'm now convinced that the readings and temps don't matter, as the readings are inaccurate (thanks for pointing that out and explaining it), and the temps have changed because of drastic differences in the temps in my pc room.

I now realize that I can't tell the difference between the PC P&C's 860W 12v rail 65mv ripple (reported to be by their test report), that I had, and the antec sig 650 I replaced it with, because of lower 15mv ripple reported by Jonny Guru; so my first choice is a corsair. I'll have made up mind as to which corsair, by reading rather than asking questions, so I'll be ordering any time within the next 10 days or so.

Thanks for all the help and I'll be listing for sale here the rma replacement sig 650w, that I get, for an excellent price. i'll have it shipped away for rma the first time I'm able to the week that just started today.
 
Well, replace the PSU if you like, but nothing you have said seems to indicate any issue whatsoever with it. Especially considering the fact that you haven't tested with a multimeter. And for the record, the Sig 650 is a better quality PSU than anything Corsair has to offer.
 
You're right; i should've tested it with a multi-meter to make sure, but the pc power silencer 610W had perfect reviews the past several days, and it was basically ~$-40-50 off. $30 instant plus free shipping.

But i have another question:
The kuma runs at an insanely high vcore for 2 cores being used, which would indicate that it was phenom b3 with insanely high leakage, with half the chip needing to be disabled. I never bothered oc'ing because of the already high temps, even if it would still be within operating temps.

But then, my monitor shutting off and showing weird graphical corruption would have to indicate that it was dying also, as well as some obvious image persistence. and the fact that it always blanked weird (and was made in a time in which all were affected by being part of a bad batch; I couldn't return to newegg nor lg, so my parents were going to eventually be satisfied using it--i exchanged it with them a few months ago, because my fhd2400 had severe sparkling, and the viewing angles sucked) with my parent's pc which has an ati gpu and pc power 850W, which I believe pc power's last multi 12v rail gpu. I bought the parts in 2006, thought the guy who built it damaged the parts, from me over-generalizing, then later saw that it could work, but didn't want it because by that time I had read that the ss2 required a patch for hdr to not look like a ps1 game, b/c ati didn't automatically apply filtering to fp16 textures. so it sat there unused for about 4 months or so until
my parent's old pos gateway was too slow, so they've been using it ever since march 2007without any issues. We all learn more each day. My OCD and ADHD make my learning a little slower, but I'm learning how to take my meds better--a recent tweak I made is why I've been making more sense the past few days.

So there's obviously a problem with either my monitor and cpu, or my psu, but you think it's more likely to be the monitor and the cpu than the psu? You could be right, so I wanted to know what you thought. There is really no way to prove either you or myself right until I put my new psu, which I won't get around to until friday.

So, it would be great to hear what you think while i'm waiting to see which one of us turns out to be right.
 
I'm sorry, but could you be a bit more clearer?

I'm gonna try to get this straight: So you're having a problem with a monitor known to have certain defects correct? And you're thinking it could either be PSU, CPU or monitor related?

Have you tried using that problematic monitor with another PC? See if the issues crop up. Also, it could be a GPU problem so run ATI Tool or Furmark to stress test the GPU and make sure everything is in working order. If you start seeing artifacts, then your GPU is the culprit. To test the CPU, use Prime 95, Orthos or OCCT to stress test the CPU>

But so far man, nothing you've said so far have indicated a PSU problem. No multimeter: no proof in your case. Typical signs of a PSU problem are stability issues, not graphical or performance issues.
 

this, at least its something thats always worth testing for the first time around. Make sure all your fans are spinning up.

I've read your various walls of text and I don't think we've got anything thats definatively pointing to one thing or another.

So lets work this out systematically. After you've given your CPU cooler and graphics card a bit of a clean for dust (just open the case and blow (dont spit), on the two heatsinks. that'l get 50% of the dust thats there):
  • Download and run Riva tuner and furmark. Use the hardware monitor (main --> target adapter --> customize --> hardware monitor) to monitor your graphics card temps. Take them as something of a grain of salt. If they're unreasonable at stock they're probably wrong. Run Furmark (any res will do, windowed mode is handy). If your driver crashes it'l enter a black-screen-loop. To keep yourself going hit alt-F4 as many times as needed to close furmark.
  • Use some temp monitoring software and a CPU stress test to test and record CPU performance/temp.
  • you might want to boot into memtest86 to bench the memory.
 
I'm sorry, but could you be a bit more clearer?

I'm gonna try to get this straight: So you're having a problem with a monitor known to have certain defects correct? And you're thinking it could either be PSU, CPU or monitor related?

Have you tried using that problematic monitor with another PC? See if the issues crop up. Also, it could be a GPU problem so run ATI Tool or Furmark to stress test the GPU and make sure everything is in working order. If you start seeing artifacts, then your GPU is the culprit. To test the CPU, use Prime 95, Orthos or OCCT to stress test the CPU>

But so far man, nothing you've said so far have indicated a PSU problem. No multimeter: no proof in your case. Typical signs of a PSU problem are stability issues, not graphical or performance issues.
Thanks=] Yes, I've used the monitor with another pc before, and it had problems that were very minor to the display corruption I'm getting now. It never shut off until it did 2x a few days ago; then the cpu may be getting weaker because the leakage is apparently indicated to be very high, as the voltage is high.

Keep in mind it was a phenom x4 with 2 of 4 of it's cores disabled-- that's a LOT of transistor space disabled, so I wouldn't be surprised if it weakens further over time.
 
Keep in mind it was a phenom x4 with 2 of 4 of it's cores disabled-- that's a LOT of transistor space disabled, so I wouldn't be surprised if it weakens further over time.
What do you mean by weaken? And the fact that half the chip is disabled has no significance to the lifetime or the working order of the CPU.
 
What do you mean by weaken? And the fact that half the chip is disabled has no significance to the lifetime or the working order of the CPU.
Well, I agree it shouldn't, but... has anyone ever done a long term study, say 5yrs?

Of course we generally change CPU's every 2 to 3 years max, so Zero82z is almost certainly correct within our usual replacement time span.
 
Well, I agree it shouldn't, but... has anyone ever done a long term study, say 5yrs?
Saying that disabling half the chip damages the CPU is like saying that turning off the light in one room in your house will damage the light in an adjacent room. A long-term study is unnecessary, since this is just pure common sense.
 
Saying that disabling half the chip damages the CPU is like saying that turning off the light in one room in your house will damage the light in an adjacent room. A long-term study is unnecessary, since this is just pure common sense.
I said that the fact that half the chip had to be disabled could indicate excessive leakage, and they just get weaker and weaker.

What I don't get, is: why didn't amd start selling these binned b3 phenoms when they started selling the binned b3 phenoms with only one core disabled? Perhaps someone could explain what I'm missing, but disabling half the cores in a chip sounds like a pretty desperate attempt to make some money, especially after the chips with only one core disabled have been out for a long time now.

I kind of wonder, with the 45 nm phenom II x2 (that i should have waited for, deneb rocks, and 2 cores that I could oc the shit out of would be cool to the die) coming, I wonder if amd pulled the kuma's out of the trash bin when they realized they could make some profit from them.

Honestly, I think it's a little odd when a cpu is made and bin half the cores originally intended to be yielded, kept just at a same very high vcore (higher, actually, iirc), and then lowered the ht link 400 MHz in addition to all of that.

Not like I'm jumping sides all of a sudden or anything, but I thought that intel never binned any nehalems other than the traditional clock speed bins. Maybe it wasn't possible with the nehalem architecture, but AMD is getting pretty damn frugle to sell my ass a kuma when it was binned to the extreme and as such offers the thermal characteristics of the real deal (i.e., a quad core), at only half the price, and 90% the ht link speed. It doesn't really make any difference that the binned ones suffered from 10% slower ht link, but still.

OTOH, I was a little retarded to not wait for the phenom II x2.
 
I said that the fact that half the chip had to be disabled could indicate excessive leakage, and they just get weaker and weaker.
Leakage doesn't make anything "weaker". It's a byproduct of the transistor design. I don't think you quite understand what it is.
disabling half the cores in a chip sounds like a pretty desperate attempt to make some money, especially after the chips with only one core disabled have been out for a long time now.
...
I wonder if amd pulled the kuma's out of the trash bin when they realized they could make some profit from them.
That much is fairly obvious. AMD is trying to make back some of the money they wasted with Phenom.
Not like I'm jumping sides all of a sudden or anything, but I thought that intel never binned any nehalems other than the traditional clock speed bins.
Not yet. They may eventually, although they may only do it with the lower-end i5 chips.
Maybe it wasn't possible with the nehalem architecture
It is possible.
AMD is getting pretty damn frugle to sell my ass a kuma when it was binned to the extreme and as such offers the thermal characteristics of the real deal (i.e., a quad core), at only half the price, and 90% the ht link speed.
Imagine that, AMD trying to milk their customers for cash.
 
Imagine that, AMD trying to milk their customers for cash.

more like:

Imagine that, a company trying to make money :confused:

anyways, the signature 650W is a fantastic unit. To dump it by the side of the road is a waste. Quality control never catches everything.
 
Thanks for advice; my pc power silencer 610 came a few days ago, but I finally took everyone's advice here and didn't open it.

i do appreciate it, and I do listen.

I'm going to try another monitor first, somehow, I'll find a way, and also try tru with vsync set to app; i read that setting it to on in the driver cp then on in the game causes problems like i had; there was no problems with graphics corruption, so.

When I have the time,---> [loaded with school work, most a little overdue, with something also due in a few hours as of which I'm going to start in the next 1 hour (only 8pts or 2% of my grade, but every fraction of a point helps=) I shouldn't have played with my meds)

--->I'll come back with a conclusion. Note that I now believe that all of you have helped me come to realize that it is indeed most likely not the psu; I'm going to send the pc power psu back to newegg after i try another monitor and get a multi-meter. pc power's tester from their store looked kind of "whack" so...

...what's a good one to get for under ~$51 shipped? Link to a page selling the product would be good, but no ill feelings towards anyone who refuses to provide a link. Thanks in advance, even if no one does provide a link.

I yield time back that I hope I didn't waste.
 
Leakage doesn't make anything "weaker". It's a byproduct of the transistor design. I don't think you quite understand what it is.

That much is fairly obvious. AMD is trying to make back some of the money they wasted with Phenom.

Not yet. They may eventually, although they may only do it with the lower-end i5 chips.

It is possible.

Imagine that, AMD trying to milk their customers for cash.
You're right=) I didn't. I had thought that it was byproduct of the actual manufacturing/fab process though.

I did say "maybe." I didn't know for sure, as I always thought it was possible that intel's process for nehalem was so good that there wouldn't be enough left over to be worth selling binned. After all, they could've advertised and factory-clocked the 920 at 3 GHz, at least, from the "insane" oc's I hear people are getting. I figured if they had a manufacturing process and product design so great that most people get at least a 300MHz oc with the most inexpensive model, then there wouldn't be much to bin.

See the amd case thread for my final words on the case, if anyone's interested.

more like:

Imagine that, a company trying to make money :confused:

anyways, the signature 650W is a fantastic unit. To dump it by the side of the road is a waste. Quality control never catches everything.
See my p.m and you won't be confused, if you listen to the advice in it. Not created by me, but I will definitely follow the people who created it for the rest of my life.

I'm not going to dump it by the side of the road; in fact you helped me to realize that I've abandoned my plans to RMA it and then sell that one.
 
I always thought it was possible that intel's process for nehalem was so good that there wouldn't be enough left over to be worth selling binned.
In a perfect world, that would be the case. However, regardless of the manufacturing technique used, there will always be partially damaged dies, especially with newer CPUs. As time goes on, the process improves. That's why Intel initially sold Conroe chips with half the cache disabled as lower-end Core 2 Duo CPUs, and then switched to the Allendale core with only 2MB of physical cache once their process improved and they had better yields. It's also why GPU manufacturers typically introduce new processes with lower-end cards, because the higher volume requirements allow them to refine their technology faster so it'll be ready to manufacture the higher-end GPUs on.
...what's a good one to get for under ~$51 shipped? Link to a page selling the product would be good, but no ill feelings towards anyone who refuses to provide a link. Thanks in advance, even if no one does provide a link.
Go to your local hardware or electronics store and pick one up there. Best option. Make sure it's digital though.
 
In a perfect world, that would be the case. However, regardless of the manufacturing technique used, there will always be partially damaged dies, especially with newer CPUs. As time goes on, the process improves. That's why Intel initially sold Conroe chips with half the cache disabled as lower-end Core 2 Duo CPUs, and then switched to the Allendale core with only 2MB of physical cache once their process improved and they had better yields. It's also why GPU manufacturers typically introduce new processes with lower-end cards, because the higher volume requirements allow them to refine their technology faster so it'll be ready to manufacture the higher-end GPUs on.

Yeah I'm in a computer hardware class, and as such I'm pretty familiar with Motorolla and Texas instriments for their silicon. A good yield on the production of these chips is 50%.
 
Back
Top