Mobo will not post

termite

Supreme [H]ardness
2FA
Joined
Aug 27, 2004
Messages
5,926
Okay I posted about this about 3 weeks ago.

I had my A8N32-sli die suddenly. I had just swapped to a new case, it powered up fine no issues. I noticed I had a wireing issue (modded case leds on the front were wired wrong), so I pulled the front of the case rewired the LEds and the pc would not boot, no fans, no lights, not even a beep.

I figured that maybe the switch had gone bad, wire came loose, etc. SO I pulled the switch, replaced it with a new one, still nothing.

I double and tripple checked the power wires, hot wired the PSU, it works fine.

So I figured that Mobo had died, ordered a new one, recieved it, installed it, nothing.

The mobo is getting power, as the green LED is on when the mobo is hooked up to power.

I checked both switches they both work with another PC.

I do not see anywhere where the mobo could be grounding to the case.

I tried to boot the mobo outside the case with just the CPU installed and one RAM, nothing, again no beeps, no boot.

So I figured just maybe I revived a DOA mobo and returned it for a replacement, installed it last night and again nothing.

This is starting to drive me nuts, I have trouble shooted this thing with every trick I know. I would try a differant PSU, but the other I have does not have the 2nd 12V plug that mates up with the main power cable. I'm at a loss here, any ideas?
 
Wow, dude, it's as if I wrote that myself. I feel your pain.

Okay I posted about this about 3 weeks ago.

I had my A8N32-sli die suddenly. I had just swapped to a new case, it powered up fine no issues. I noticed I had a wireing issue (modded case leds on the front were wired wrong), so I pulled the front of the case rewired the LEds and the pc would not boot, no fans, no lights, not even a beep.

I figured that maybe the switch had gone bad, wire came loose, etc. SO I pulled the switch, replaced it with a new one, still nothing.

I double and tripple checked the power wires, hot wired the PSU, it works fine.

So I figured that Mobo had died, ordered a new one, recieved it, installed it, nothing.

The mobo is getting power, as the green LED is on when the mobo is hooked up to power.

I checked both switches they both work with another PC.

I do not see anywhere where the mobo could be grounding to the case.

I tried to boot the mobo outside the case with just the CPU installed and one RAM, nothing, again no beeps, no boot.

So I figured just maybe I revived a DOA mobo and returned it for a replacement, installed it last night and again nothing.

This is starting to drive me nuts, I have trouble shooted this thing with every trick I know. I would try a differant PSU, but the other I have does not have the 2nd 12V plug that mates up with the main power cable. I'm at a loss here, any ideas?
 
if you cant swap out your psu, try swapping out your cpu. you may have shorted something at the start of this, and zorched your processor. also check to see if all the jumpers that are supposed to be on the board are on the board, and in the correct places.
but it does kind of seem like your psu has bricked.
 
I'd bet it's your PSU. I've had similar problems before and some boards just don't work with some PSU's. For example, I had a Coolermaster 600W PSU that wouldn't spin up for anything even though the rails should theoretically had plenty of power to power the system it was in. I swapped it out for my good ol' 520W OCZ Powerstream and everything booted right up. I took that same Coolermaster 600W and put it in a computer with a P4 and a 9800Pro and that booted right up also.
 
Well if it's not the power unit..

A8N = ASUS, right? :rolleyes:

I would go for RMA on the board. Again. It's not entirely unfeasible that you'll get back to back DOA mobos.
 
Alrighty quick update, I tried earlier to boot the mobo with an older PSU (470 watt, no 2nd 12v main power plug just single one). The fans spun and the PSU kicked on for a second or so, no post, but it's better then what it was doing before. My issue may very well be PSU related. Maybe there is an issue with the A8N32-SLI damaging PSU's?
 
Did you try booting the board with the bare minimum components. 1 stick of memory, HDD, etc.
 
Did you try booting the board with the bare minimum components. 1 stick of memory, HDD, etc.

Yes that was the first thing I did. Turns out it was the power supply. The Hiper I was using works fine when hotwired, but as soon as it is plugged into the Mobo it will not fire up. Swapped the Hiper with a Corsair, and it works like a charm.

I plugged the power supply into the original A8N and it also sprung back to life. I guess I have a back up Mobo now. Wasted about 3 weeks on this doing worthless RMA's....
 
My experience has been that a good PSU cuts down on a lot of problems ;). Glad it's working now.
 
Back
Top