Okay I posted about this about 3 weeks ago.
I had my A8N32-sli die suddenly. I had just swapped to a new case, it powered up fine no issues. I noticed I had a wireing issue (modded case leds on the front were wired wrong), so I pulled the front of the case rewired the LEds and the pc would not boot, no fans, no lights, not even a beep.
I figured that maybe the switch had gone bad, wire came loose, etc. SO I pulled the switch, replaced it with a new one, still nothing.
I double and tripple checked the power wires, hot wired the PSU, it works fine.
So I figured that Mobo had died, ordered a new one, recieved it, installed it, nothing.
The mobo is getting power, as the green LED is on when the mobo is hooked up to power.
I checked both switches they both work with another PC.
I do not see anywhere where the mobo could be grounding to the case.
I tried to boot the mobo outside the case with just the CPU installed and one RAM, nothing, again no beeps, no boot.
So I figured just maybe I revived a DOA mobo and returned it for a replacement, installed it last night and again nothing.
This is starting to drive me nuts, I have trouble shooted this thing with every trick I know. I would try a differant PSU, but the other I have does not have the 2nd 12V plug that mates up with the main power cable. I'm at a loss here, any ideas?
I had my A8N32-sli die suddenly. I had just swapped to a new case, it powered up fine no issues. I noticed I had a wireing issue (modded case leds on the front were wired wrong), so I pulled the front of the case rewired the LEds and the pc would not boot, no fans, no lights, not even a beep.
I figured that maybe the switch had gone bad, wire came loose, etc. SO I pulled the switch, replaced it with a new one, still nothing.
I double and tripple checked the power wires, hot wired the PSU, it works fine.
So I figured that Mobo had died, ordered a new one, recieved it, installed it, nothing.
The mobo is getting power, as the green LED is on when the mobo is hooked up to power.
I checked both switches they both work with another PC.
I do not see anywhere where the mobo could be grounding to the case.
I tried to boot the mobo outside the case with just the CPU installed and one RAM, nothing, again no beeps, no boot.
So I figured just maybe I revived a DOA mobo and returned it for a replacement, installed it last night and again nothing.
This is starting to drive me nuts, I have trouble shooted this thing with every trick I know. I would try a differant PSU, but the other I have does not have the 2nd 12V plug that mates up with the main power cable. I'm at a loss here, any ideas?