• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Intel SASU8CI Setup???

Abula

Abula

[H]ard|Gawd
Joined
Oct 29, 2004
Messages
1,036
Well im finishing my server, and have already flashed both Intel SASUC8I to latest IT firmware, but upon connecting both i get the following screen when the system is booting,

lsiloadup.jpg


If i enter with Control C the LSI config, i get

lsiconfig.jpg


I already installed LSI drivers and seems to be working fine, at least no conficts on device manager of WHSv1

lsiwindows.jpg


Just wondering if i need to change something or do you see anything wrong that i should change? im about to load all hdds just need confirmation if i should do something or just ignore the inital messege from the LSI cards.

Thanks for your time,
 
I don't see anything amiss. It's saying config changed because it's a fresh flash, and no supported devices because you haven't got any (bootable) drives configured.
 
Curious if you can see any S.M.A.R.T. data from your hard drives using that controller. I see nothing with mine (using LSI bios etc.).
 
Wyxe said:
Curious if you can see any S.M.A.R.T. data from your hard drives using that controller. I see nothing with mine (using LSI bios etc.).
Click to expand...
Nope, I cant see anything either, not even temperatures.


dustNbone said:
I don't see anything amiss. It's saying config changed because it's a fresh flash, and no supported devices because you haven't got any (bootable) drives configured.
Click to expand...
Thanks for the reply, i added the hdds to the storage pool and started copying from my old server and everything is fine atm, getting transfers up to 100 mb/s (not always, but most of the time).

I do continue to see the same messege upon loading, and only the first SASUC8i displays the hdds on the initial load, not sure why the second doesnt, but on windows i all drives that are connected to the SASUC8i, maybe i need to add it to the boot on the LSI uitility?

One bad thing that did happen to me, for some reason when i ever i reboot, i get stucked in LSI display, when the HBA is recognizing the hard drives, the wierd thing is that happen always with a reboot, while with shutdown and power on never happens, not a big deal i'll adjust, but would be great if anyone knows a workaround.

Thanks again for the replies,
 
You must log in or register to reply here.
Back
Top