Intel G2 SSD suttering on Win7

Yeah I was wondering about that. It's going to require a re-install isn't it?

Well my offset is ok at least. I still wonder why it didn't turn off superfetch on the install though.
 
There's ways to switch to AHCI w/o re-installing (Google it), but I've never tried it personally... Can get pretty messy if you switch and boot up w/o the proper precautions.
 
Last edited:
i would just reinstall for the heck of it...

but if you want to change it w/o reinstalling.. its really easy, all you change is a few registry entries...
 
Damn, I tried it, and bsod/reboot after the windows logo. Ah well reinstalling doesn't take too long, and I can watch football at the same time.

EDIT: well here's my HD Tune in IDE mode. It's lower but steady. I'll reinstall with AHCI and see how much of a difference there is.
 
Last edited:
Yep, after a reinstall and enabling AHCI, now i'm getting around 220MB/s. Thx old hippie!
 
Here's my gen 1 SSD for comparison.









But now to ask my question. :D

How can I tell the firmware my 80gb SSD came with and can someone point me to the correct newest firmware for it?

Thanks
 
Ok with AHCI enabled, sometimes Win7 blue screens before it gets to the logon screen, but sometimes it makes it into windows. I also noticed I lost my overclock as well. I think my mobo thought there was an unsuccessful OC so it resorted to save BIOS settings.

I ended up having to turn off the PSU for a few minutes so I could go back in and re-enable the OC. I also had to go back to IDE mode as well, since the OC is more important than the SSD speed increase.

I'm wondering if this an issue with this board, ICH9, or could other HDDs that aren't AHCI compliant cause this.

I also have a Vraptor 300, a Samsung F1, and a Seagate 7200.10 in there.
 
Ok with AHCI enabled, sometimes Win7 blue screens before it gets to the logon screen, but sometimes it makes it into windows......

I'm wondering if this an issue with this board, ICH9, or could other HDDs that aren't AHCI compliant cause this.


Or Win7 itself?
 
Ugh, alright, well i'm not the only one. I'll quit banging my head on this then. Hopefully there's a hotfix soon after oct. 22.

At least I got through the install with AHCI on, so hopefully I won't need to do another re-install later.

Thx Hippie!
 
There's something about NVIDIA motherboards and AHCI that doesn't work well. You may want to google it. Last time I saw it was on an anandtech forum.
 
Yeah i've seen those posts, but i'm using an P35 board.

Now I wonder if I should be installing the intel storage matrix drivers on Win7. My current install has them installed, but maybe win7 doesn't need em?
 
ISM drivers I heard turn off NCQ for some reason. Last time I installed it, my 64-thread read score in AS SSD plummeted. Your call.
 
Back
Top