Help requested - thinking about going i7...

SirKronan

Supreme [H]ardness
Joined
Dec 7, 2007
Messages
4,732
Dear [H] Members,
I have set aside a little tax money for some upgrades to my new rig. I have maybe a little over $500 to throw at it. (I could squeeze a little more by selling current components, too).

Firstly, I am almost certain I want that new full-tower case Corsair is going to make, assuming it really materializes in May on shelves (unless you can suggest a similar performing/featured unit with as good of cooling and cable management options at similar or better price...)

There goes $250, I'm guessing, on that. Now, Dell has that Q9550 for $240!!! That would be a nice upgrade to replace my Q6700 with. Better temps and quicker performance with less voltage. That would be quite a decent upgrade, and would work great probably on my P5Q pro or my 780i EVGA board.

But, I could sell the Q6700, P5Q Pro, and the 780i and use that money with my tax refund to buy an x58 board, 920 processor, and some RAM. These are the boards I'm considering (not in any special order):

1. EVGA

http://www.newegg.com/Product/Product.aspx?Item=N82E16813188046

Main appeal of this board is that I like the layout, and the $250 AR price. Performance, stability and overclocking reviews are largely solid on this one. The one limiting factor is that Anand mentioned that it can't do 1600 on RAM with the 920 processor for some reason, and I think the Asus and Gigabyte models can ... correct me if I'm wrong.

Edit: Turns out the memory problem is corrected in current BIOS, and this cheaper model has no lifetime warranty. No more price advantage.

2. Gigabyte

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128362

All hail the mighty UD5! This board has lots of high praise, and while more expensive still has a good layout and overclocks well. It's ugly (I like black PCB) but if this is really what my money should be spent on let me know. It's here on my short list and boasts good features and expandability. I have had one bad experience with their customer service - or lack of it. But I believe overall they make solid boards.

3. Asus

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131365

This one got Anand's Editor's Choice gold award. They liked the BIOS, it overclocked well, and had great stability. My many experiences with Asus have met or exceeded all expectations, including phone support, having them send me a rebate check even when I mailed the form in late, and being able to hit 4.0GHz Vista stable on my Q6700 on air with my P5Q Pro. Love my Asus board!

This is the RAM I'm thinking of using:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231247

Fair timings, 1600MHz, solid brand, and price seems good right now for 6GB.

There's also this:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820227381

Better timings and same price after rebate.

So what do you guys advise? I really don't know what to do. Get the Q9550, new case and call it good? Or sell a bunch of stuff and go i7? I game a lot, and will be doing a lot of HD video editing, as well as using CS4 extensively for design and photo editing. I am an extreme multitasker as well, and will use Vista 64 bit on my primary rig for sure, eventually win 7.

I welcome and request your wisdom!! :D
 
I have run my DDR3-1866 at 1600 in triple channel with my 920 on the EVGA board. So far I'm happy with the board. Got the lifetime warranty version in a combo from NCIX with 6x1GB Aeneon for $340.
 
I have run my DDR3-1866 at 1600 in triple channel with my 920 on the EVGA board. So far I'm happy with the board. Got the lifetime warranty version in a combo from NCIX with 6x1GB Aeneon for $340.

Nice! What's your best OC on the 920? Temps? Voltage needed?

And when Anand did the review, I found out they didn't have the latest BIOS that removes the RAM speed limitations with the 920.

Also, I need to do 3x2. I want to be able to put in 12 later. So now the warranty thing destroys the price advantage. The lifetime warranty (A1) version is $300 like all the others.
 
Wish I could get the Evga X58 to work to even find out...........RMA

That's not very promising...

Nice! What's your best OC on the 920? Temps? Voltage needed?

And when Anand did the review, I found out they didn't have the latest BIOS that removes the RAM speed limitations with the 920.

Also, I need to do 3x2. I want to be able to put in 12 later. So now the warranty thing destroys the price advantage. The lifetime warranty (A1) version is $300 like all the others.

No answers to my questions yet? Anyone else have any input on the best x58 for the buck? I would like to be able to hit 4.0GHz.
 
evga. do you plan on owning it for your lifetime? besides, the other 2 boards you spec'd are an asus and a gigabyte!! so stop dicking around and get the evga or the dfi lp ut.

no reason to invest in old tech. sell your stuff and upgrade to i7. you're a big multitasker? well now you will have 8 cores.
 
evga. do you plan on owning it for your lifetime? besides, the other 2 boards you spec'd are an asus and a gigabyte!! so stop dicking around and get the evga or the dfi lp ut.

no reason to invest in old tech. sell your stuff and upgrade to i7. you're a big multitasker? well now you will have 8 cores.

DFI? What DFI do you recommend? Never owned a DFI board before.

So I'm assuming you'd save the $50 and go for the 2 yr. warranty EVGA linked above. Honestly, I'll likely upgrade again in two or three years, so you're right about the lifetime warranty. Most of the support I've needed, at least on motherboards, has been in the first year - only ever needed support on Gigabyte & EVGA.

Also, what do you think of this for RAM?
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231247

Thanks for the response.
 
I just received an EX58-UD5 motherboard. I spent quite a while doing the research and came to the conclusion that it's probably the best all-around X58 board in the $300 price range. I have yet to take it out of its box and set it up. Planning that for tomorrow.

As far as the ram goes, I also did a bit of reading. I was originally going to go with that PI kit you linked to but decided to go with this G.Skill kit instead.

My reasoning:
You should NOT exceed 1.65v for DDR3 ram on the X58 chipset. In real world performance, timings make little (if any) difference. Therefore, I'd rather be safer with ram at 1.5v (which can be OC'ed to 1.6-1.63v) than ram that initially requires a higher voltage.
 
The best bang for the buck motherboard is NOT any board listed in this thread. The best bang-for-buck motherboard is the Gigabyte EX58-UD3R vanilla, and then flash it with the SLI version bios. Both boards cost the same pre-MIR, but the vanilla one gets an MIR while the SLI version does not.

With MIR and SLI bios flashed, the UD3R comes out under 200 bucks. The only other alternative is going MSI X58 Pro and flashing it with the SLI version bios which comes out a little cheaper, but less SATA ports to play with. I'm more likely to need 8 SATA ports then I am likely to use 6 memory slots.
 
So what do you guys advise? I really don't know what to do. Get the Q9550, new case and call it good? Or sell a bunch of stuff and go i7? I game a lot, and will be doing a lot of HD video editing, as well as using CS4 extensively for design and photo editing. I am an extreme multitasker as well, and will use Vista 64 bit on my primary rig for sure, eventually win 7.

For gaming, CS4, and HD video editing, I'd recommend taking the i7 route. It will cost you more but will be a worthwhile investment for the tasks you mentioned.
 
I just received an EX58-UD5 motherboard. I spent quite a while doing the research and came to the conclusion that it's probably the best all-around X58 board in the $300 price range. I have yet to take it out of its box and set it up. Planning that for tomorrow.

As far as the ram goes, I also did a bit of reading. I was originally going to go with that PI kit you linked to but decided to go with this G.Skill kit instead.

My reasoning:
You should NOT exceed 1.65v for DDR3 ram on the X58 chipset. In real world performance, timings make little (if any) difference. Therefore, I'd rather be safer with ram at 1.5v (which can be OC'ed to 1.6-1.63v) than ram that initially requires a higher voltage.

Thanks for the responses everyone.

First of all, I know that I will use the 12 gigs, and the EVGA board with the later BIOSes has proven itself to handle 12 sticks quite well. I'm reading about more and more people hitting 4 or 4.2GHz with the 920 on this board using the TRUE, which I happen to have. And $250 AR is getting closer to the prices of some of the cheaper X58 boards, but without making any sacrifices (except warranty)

As for that ram, notice that the 1.6-1.65v G.Skill kit has tighter timings: 8-8-8-21 vs 9-9-9-24. While they are the same price, I like the looks of the bigger heat spreader stuff, plus, I'm sure it would run at the looser 9-9-9-24 at below 1.6 if the red stuff will. Now just to clarify, running at 1.65 or higher damages the board, or the RAM, or both??
 
As for that ram, notice that the 1.6-1.65v G.Skill kit has tighter timings: 8-8-8-21 vs 9-9-9-24. While they are the same price, I like the looks of the bigger heat spreader stuff, plus, I'm sure it would run at the looser 9-9-9-24 at below 1.6 if the red stuff will. Now just to clarify, running at 1.65 or higher damages the board, or the RAM, or both??

Bigger heatsinks - plus, but your case should be passively cooled anyway
Timings - no real world performance benefit, perhaps a few extra points in benchmarks

Memory has a great probability of working at a higher voltage than being able to work at a lower-than-specified voltage (undervolt). I'm not sure if that G.Skill kit will work at below 1.6v so I can't say for sure.

As far as the voltage is concerned: "With Nehalem, the memory controller is built into the CPU itself, unlike current Intel motherboards where it's built into the chipset. So it's easy to assume that the voltage is shared by both the CPU and memory, and that's why going too high could damage not the memory, but the CPU."

From another website:
The giant chip maker [Intel] is said to have warned both motherboard makers and memory vendors that its new X58+Core i7 combo would not support memory modules with voltage over that limit. The risk of getting a fried CPU appears once the 1.65V barrier is crossed.

That being said, I went with the red kit. Sure, its not as good at overclocking as the G.Skill Blacks, but it's enough and runs solid at 1600mhz. Lower voltage = less heat = less probability of failure = more stability.
 
Well, I'm being patient this time. Do you suppose that the Wintec stuff is a better buy at $80 shipped, if it goes back in stock?
 
the wintec stuff is a great buy if it comes back in stock. memory timings dont count for much on this platform. re the 1.65v vdram thing. actually you are supposed to stay within 0.5v of your vtt voltage, and the default value of vtt is 1.15v. but if you raise your vtt, you can also raise your vdram. i have my vtt set to 1.40v. but i still have my ram set to 1.675v because thats all my ram needs to run at 1640mhz, 8-8-8-24. i believe intel says that the result of overvolting the ram to more than 0.50v over vtt would be zorching your cpu. but you really dont have to worry about running your ram at 1.65v.

if you dont get the evga i would recommend the dfi lp dk

http://www.newegg.com/Product/Product.aspx?Item=N82E16813136065

or the lp dk jr

http://www.newegg.com/Product/Product.aspx?Item=N82E16813136066


and the g.skill ddr3 1600 pi for $100 is a great deal on great ram.
 
You know, the P6T Deluxe got Anand's editor's choice award, and they were testing the first version. In fact they mentioned that the SAS ports offer better throughput than the SATA ports on even SATA drives?? Or did I read that wrong ... anyways, for sure they are backwards compatible. When I read that the P6T only had 6 SATA ports, I didn't realize that, which was one of the reasons I put the EVGA above it on my list. I still like the layout better on the EVGA board. Someday I may splurge on that second 295. Remember how prices plummeted on the GX2? Relatively "cheap" quad SLI someday, and a CPU that won't bottleneck it is my eventual goal. And the P6T doesn't have my ideal layout. Have a look:

P6T-SlotLayout.jpg


The first 295 will cover the first PCI slot. If I use the other x16 slot then it blocks the PCI-E slot that I would use for a physx card in the future. If I use the last slot, then I will be operating in x16/x8 mode with the 295's and the physx card will be sandwiched right up against the second 295, and my very nice PCI soundcard will be in that last PCI slot squished right in the middle. Not my idea of an ideal setup, because the GTX 295 can actually uses a lot of bandwidth and might possibly be hindered a little if one of them is in x8 mode. I know we're already talking about so much performance here that it's a nitpick, but nonetheless.

EVGAx58-SlotLayout.jpg


The EVGA setup is just as sandwiched, but both 295's will operate in full x16 mode, with the physx card in x8 mode, which is plenty good for physx. My $80 soundcard will fit in on the end. I suppose one advantage of the P6T is the extra x4 slot that I could just put a different soundcard it, but that adds unnecessary expense to the build. I'm still undecided. So far all I've bought is the ram, but I really am not sure which board to get. $205 is incredibly tempting for Anand's editor's choice of x58 boards.
 
Just a correction................

that board you have pictured is a P6T Deluxe, not a P6T.

1. There is no SAS ports on the P6T (only 6 sata ports) the P6T Deluxe has 8 (with SAS ports)

2. The PCI-E slots on the P6T are not set up the same way....there are 3 but they are spaced farther apart.

Check ASUS web site to see the dif between P6T, P6T Deluxe, and P6T Deluxe v2.......they are all different boards.

P6T ...~$200........ http://www.asus.com/product.aspx?P_ID=QtpKQuERkuYw6trc
P6T Deluxe ~250$..http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ

I use a P6T Deluxe.

my opinion.....putting a dedicated physx card in a system that will have 2x GTX295's is pointless. Get the Deluxe version and forget the PhysX card.
 
Just a correction................

that board you have pictured is a P6T Deluxe, not a P6T.

1. There is no SAS ports on the P6T (only 6 sata ports) the P6T Deluxe has 8 (with SAS ports)

2. The PCI-E slots on the P6T are not set up the same way....there are 3 but they are spaced farther apart.

Check ASUS web site to see the dif between P6T, P6T Deluxe, and P6T Deluxe v2.......they are all different boards.

P6T ...~$200........ http://www.asus.com/product.aspx?P_ID=QtpKQuERkuYw6trc
P6T Deluxe ~250$..http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ

I use a P6T Deluxe.

my opinion.....putting a dedicated physx card in a system that will have 2x GTX295's is pointless. Get the Deluxe version and forget the PhysX card.

I was referring to the P6T Deluxe, and the photo that I posted is from the Deluxe. Thanks for your input though. I'm really having a hard time making up my mind, and I have to soon because I've found a buyer (pretty sure) for my Q6700, 780i, and DDR2. Anything you can tell me about your experience with the deluxe?
 
Ive had very good experience with the deluxe, but this I have not really tried anything else.
My last two MB's were with ASUS last one being a crosshair.....which I had never had any trouble with as well...hence my reason for going with the P6T deluxe.....stability & clock ability are my main priorities with a board....and this one has never let me down thus far.


Overclock....been VERY stable for 2 months now @ 3.8Ghz......never have I seen a BSOD on this board.....running 24/7.....even with clock @ 4Ghz......Ive just choosen to keep it at 3.8 so I am able to keep CPU voltage @ 1.22 .....which keeps the temps at a very comfortable level ( 36-38c idle / 63c max at full load for 8hrs) . I have this on water BTW.

Also I am so used to the many bios options on asus boards, I have looked into other bio's on other boards, ands seems as though the Asus boards seem to offer the most tweakablitiy. Although it takes hardly any tweaking at all with this board to overclock.

Other computer in home uses a gigabyte board, which I can not say has been stable for me.

As for the audio......I use Bose Companion 5 speakers.....which run off of USB....I have tried other high end speaker setups..Logitech..etc. NOTHING has compared to the sound of these things. That and also they use such a small amount of space, I hate clutter. The Bose use there own audio....so no audio card running with them. Never had any audio driver issues with them.

I do use the on board audio ....using digital outputs only....connected to a 1000w Sony receiver....VERY good quality considering its on board. This is used for watching BR movies on the plasma with 7.1 surround sound. Sound is connect from P6T to GTX285 connected VIA HDMI to receiver > plasma. HDMI cable does the whole video/audio connection.

I will stress one thing with your build though that will be VERY important, never, never, never skimp on the PSU. My opinion there is no such thing as overkill on a PSU. I believe most problems people have with their systems is caused by or starts with skimping on a PSU. I'm not saying you have to have a 1200w PSU:D(i don't think ill ever have to worry about having too little) but just don't go too low. I would not recommend to try using that 500w you are using now.:( especially if you are going to use a newer gen video card.

I do have alot powered by this system though, 8 HDD's just to start.....so a higher end PSU is neccesary just because of the heat the Hdd's can create inside the system. The hdd's are sitting near the intake of the PSU. I think its this heat that took out a 1000w Silverstone PSU that was in this same box before. It ran for 1 year. RMA'ed the Silverstone, now have a new one (1000w) sitting on standby in case the same happens to this PSU. I have thought of cutting a vent hole on the right side of this box for ventalation for the PSU...but just cant convince myself to cut one in this acrylic box.:confused: This box is designed to hold 5 Hdd's but ive managed to fit in 8:cool: 6 on the bottom.....one VRaptor on top....and a swappable Hdd bay on the left. BR drive is on the right (OMG :eek: guess that makes 9)

A pic of my system.....
.__480_359_PC1.JPG


I do plan on adding another GTX285 when prices drop a little, but at the present time I am very happy with gaming with this board. I also use this system as a HTPC as it is also connected to our 50" plasma.
 
Ive had very good experience with the deluxe, but this I have not really tried anything else.
My last two MB's were with ASUS last one being a crosshair.....which I had never had any trouble with as well...hence my reason for going with the P6T deluxe.....stability & clock ability are my main priorities with a board....and this one has never let me down thus far.


Overclock....been VERY stable for 2 months now @ 3.8Ghz......never have I seen a BSOD on this board.....running 24/7.....even with clock @ 4Ghz......Ive just choosen to keep it at 3.8 so I am able to keep CPU voltage @ 1.22 .....which keeps the temps at a very comfortable level ( 36-38c idle / 63c max at full load for 8hrs) . I have this on water BTW.

Also I am so used to the many bios options on asus boards, I have looked into other bio's on other boards, ands seems as though the Asus boards seem to offer the most tweakablitiy. Although it takes hardly any tweaking at all with this board to overclock.

Other computer in home uses a gigabyte board, which I can not say has been stable for me.

As for the audio......I use Bose Companion 5 speakers.....which run off of USB....I have tried other high end speaker setups..Logitech..etc. NOTHING has compared to the sound of these things. That and also they use such a small amount of space, I hate clutter. The Bose use there own audio....so no audio card running with them. Never had any audio driver issues with them.

I do use the on board audio ....using digital outputs only....connected to a 1000w Sony receiver....VERY good quality considering its on board. This is used for watching BR movies on the plasma with 7.1 surround sound. Sound is connect from P6T to GTX285 connected VIA HDMI to receiver > plasma. HDMI cable does the whole video/audio connection.

I will stress one thing with your build though that will be VERY important, never, never, never skimp on the PSU. My opinion there is no such thing as overkill on a PSU. I believe most problems people have with their systems is caused by or starts with skimping on a PSU. I'm not saying you have to have a 1200w PSU:D(i don't think ill ever have to worry about having too little) but just don't go too low. I would not recommend to try using that 500w you are using now.:( especially if you are going to use a newer gen video card.

I do have alot powered by this system though, 8 HDD's just to start.....so a higher end PSU is neccesary just because of the heat the Hdd's can create inside the system. The hdd's are sitting near the intake of the PSU. I think its this heat that took out a 1000w Silverstone PSU that was in this same box before. It ran for 1 year. RMA'ed the Silverstone, now have a new one (1000w) sitting on standby in case the same happens to this PSU. I have thought of cutting a vent hole on the right side of this box for ventalation for the PSU...but just cant convince myself to cut one in this acrylic box.:confused: This box is designed to hold 5 Hdd's but ive managed to fit in 8:cool: 6 on the bottom.....one VRaptor on top....and a swappable Hdd bay on the left. BR drive is on the right (guess that makes 9:eek:)

A pic of my system.....
.__480_359_PC1.JPG


I do plan on adding another GTX285 when prices drop a little, but at the present time I am very happy with gaming with this board. I also use this system as a HTPC as it is also connected to our 50" plasma.

Cool pic! Thanks for the response. Any chance you could take some more closeup pictures? I'd like to see more of how you have things hooked up on your board.

And I don't have a 500w. I have a 650w Antec I'm using now, but I have a brand new 1000w Antec TruPower sitting in the closet for when I go i7. It's very highly rated, and actually puts out the rated 70A combined on the 12v rail. (not sure whether it's multi-rail or not, but meh, no biggie - it's a good unit.)

I like Asus's BIOSes too. Does this BIOS let you save ALL BIOS settings in the profiles? It only has 3, right? I wish it had more. And please let me know whether it saves every BIOS settings, or just timings, voltages, and clock settings.

Thanks again!
 
That PSU you have waiting will be perfect for the i 7 build.

As far as the profiles in the P6T Asus Bios....it will hold 2...but there is also the option to save more bios settings on a connected HDD or a USB drive will work, so there is no limit there. And it does save all the bios settings.
 
That PSU you have waiting will be perfect for the i 7 build.

As far as the profiles in the P6T Asus Bios....it will hold 2...but there is also the option to save more bios settings on a connected HDD or a USB drive will work, so there is no limit there. And it does save all the bios settings.

Sweet! Maybe I should snag that open box P6T Deluxe V1 for $205 plus shipping ... I would pay extra for an I/O plate!! I gotta have that. Manuals shmanuals. Cables Shmables. But I really need the I/O plate.
 
That Is a great price for a P6T deluxe ! I payed 289$ at MicroCenter for mine.
I just hope the open box thingy wont be an issue for you. Make sure they guarantee its a fully working board.

OMG....LOL..... I have an extra IO plate :eek: I had two in the box when i opened it....dont know why...guess asus goofed


Here's a few closer-up pics......its all I have for now.................
.__480_359_PC3.JPG

.__480_359_PC4.JPG

.__480_359_PC5.JPG


and the overall setup.............(50% of my monthly electric bill....LOL)
.__480_359_PC8.JPG

.__480_359_PC6.JPG


Is also on a Wireless-N network to the other Asus system upstairs in bedroom...which is also connected to a 50" LG Plasma (another 45% of monthly electric bill:rolleyes:)
 
Last edited:
That Is a great price for a P6T deluxe ! I payed 289$ at MicroCenter for mine.
I just hope the open box thingy wont be an issue for you. Make sure they guarantee its a fully working board.

OMG....LOL..... I have an extra IO plate :eek: I had two in the box when i opened it....dont know why


Here's a few closer-up pics......its all I have for now.................
.__480_359_PC3.JPG

.__480_359_PC4.JPG

.__480_359_PC5.JPG


and the overall setup.............(50% of my monthly electric bill....LOL)
.__480_359_HPIM5170.JPG

.__480_359_PC6.JPG

Wow, dude. You got it made. I am extremely impressed! Is it exactly the same I/O port as the one you're using in your case? If so, hang on to it. I might buy it from ya in case I buy this board and don't get one. :D
 
Yes, the I/O plate is exactly as the one I am using in the case:p
hope all goes well for you......let me know....send me a private message if interested in need of the I/O plate
 
I got my ASUS Gene II mATX board last friday, and so far I've been happy with it. Running it with 6gb corsair xms3, and 920 i7
 
Very very nice setup... 'Cept for those speakers!

Thanks for the comment.

But I beg to differ on the speakers........I tried the Logitech Z-5500 digital on a SB X-Fi card....and they sound horrible compared to these Bose ........ this was a side by side comparison.
The Bose are for general computer use ... system is also hooked up to a 1000w Sony receiver via HDMI full 7.1 surround on Harman Kardon speakers and sound is very impressive with DTS/DD movies.
 
Last edited:
Very very nice setup... 'Cept for those speakers!

Wow. Those speakers are amazing, in my opinion anyways. The sound might not be "blasting" but boy is it filling and pure. And the speakers are small. I think they're a little pricey at full retail but anyone complaining about the sound hasn't really given them a fair listen.

... or listens to nothing higher than a 128 bitrate. :p

By the way, I ended up going with the EVGA x58 board. The layout, look, and price sold me on it. Newegg matched a sale ZZF had on it a couple weeks ago, even though the sale was over. They did $240 shipped AR for me. Awesome service, and I'm certain it will be an awesome motherboard. AR it would only be about 18 bux more than the P6T Deluxe once you include shipping, and I'll get the I/O plate and the full 2 year warranty + EVGA's 24/7 tech support. I'm pretty flipping excited. It was definitely between the P6T Deluxe and the EVGA, though. Those were the best looking, best layout boards for what I would need, and they both (after BIOS updates) provide the best of the best 12GB memory support and overclocking. I've read tons of reviews and these two boards consistently run solid timings and voltages, and have overall great compatibility with RAM across the board. Gigabyte also did well, but the look/layout of that board didn't quite fit my needs as well, and it is more expensive, too.

I think I will be happy, assuming Amazon gets me my RAM someday.... Processor should be here tuesday, motherboard on monday, so I'm pretty excited!
 
Yes I do agree the Bose are a bit pricey, but after using them for a year now it is in the same a purchase that I do not at all regret. The sound quality is absolutely amazing.


Congrats on your purchase of the new board and processor, you will love the power of the i7. It has been the best upgrade i've made on a computer in years. I wish you the best of luck on the upgrade, and I know you will enjoy it.
 
Yes I do agree the Bose are a bit pricey, but after using them for a year now it is in the same a purchase that I do not at all regret. The sound quality is absolutely amazing.


Congrats on your purchase of the new board and processor, you will love the power of the i7. It has been the best upgrade i've made on a computer in years. I wish you the best of luck on the upgrade, and I know you will enjoy it.

Thank you. I'll let you know how it works out.
 
Thanks for the comment. But I beg to differ on the speakers........I tried the Logitech Z-5500 digital on a SB X-Fi card....and they sound horrible compared to these Bose ........ this was a side by side comparison. The Bose are for general computer use ... system is also hooked up to a 1000w Sony receiver via HDMI full 7.1 surround on Harman Kardon speakers and sound is very impressive with DTS/DD movies.

I wouldn't consider the Z-5500's great speakers for anything but gaming either (and they're just passable for that, depending on the price, anything over $200's a ripoff)... I figured you had a receiver (it's visible there) and full surround setup for the tv. In any case, for music listening while working on the PC and such I'd probably grab a pair of active monitors (Audioengine A2, Samson StudioDock3i, Swan M200MkII, etc.), but that's just me. I'm willing to bet any of those would eclipse the Bose or any set of computer speakers, 'specially for the price. /shrug

Doesn't the case get in the way of your feet btw? Case looks awesome though, did you make it yourself or what?
 
Back
Top