Hello,
http://img217.imageshack.us/img217/7291/76042071.jpg
I've now run 230 passes of Linx and 5 hours of prime95 at the same time with about an 80 degrees on load. Is this ok? I have 1.25 cpu voltage and 1.275 QPI/DRAM core voltage. it idles low 40s high 30s. its at 3.8 ghz right now with 181x21. I had to lower my ram speed to 1444. should i see if i can increase my ocz gold 1600 to 1800?
Also, any advice on what i should do to decrease this heat? I have everything enabled except for virtualization and would like to keep HTing on. I have a Noctua NH-U12P.
Just a remake of my voltages:
Asus P6T Deluxe V1
Core i7 920 3.8 GHz 181x21 @ 1.25v with QPI/DRAM Core Volt @1.275
Ocz gold 6gb(3x2gb) 1600 @ 1448 8-8-8-21-1T 1.56V (Standard 1.65V 1600 8-8-8-24-1T)
Everything else on stock voltages
Any help would be appreciated! thanks in advanced
http://img217.imageshack.us/img217/7291/76042071.jpg
I've now run 230 passes of Linx and 5 hours of prime95 at the same time with about an 80 degrees on load. Is this ok? I have 1.25 cpu voltage and 1.275 QPI/DRAM core voltage. it idles low 40s high 30s. its at 3.8 ghz right now with 181x21. I had to lower my ram speed to 1444. should i see if i can increase my ocz gold 1600 to 1800?
Also, any advice on what i should do to decrease this heat? I have everything enabled except for virtualization and would like to keep HTing on. I have a Noctua NH-U12P.
Just a remake of my voltages:
Asus P6T Deluxe V1
Core i7 920 3.8 GHz 181x21 @ 1.25v with QPI/DRAM Core Volt @1.275
Ocz gold 6gb(3x2gb) 1600 @ 1448 8-8-8-21-1T 1.56V (Standard 1.65V 1600 8-8-8-24-1T)
Everything else on stock voltages
Any help would be appreciated! thanks in advanced