Help (Core 2 Duo Issue) -- WILL NOT load ANY OS

DMystikaLD

Gawd
Joined
Apr 14, 2003
Messages
603
Hey guys,

I bought the following:
- http://www.newegg.com/Product/Product.asp?Item=N82E16856101009
- http://www.newegg.com/Product/Product.asp?Item=N82E16819115003
- http://www.newegg.com/Product/Product.asp?Item=N82E16820145098
- http://www.newegg.com/Product/Product.asp?Item=N82E16822144016 (x2)

Anyways -- the system is built, and it boots fine, until I try to load an operating system. The bios recognizes both hard drives, the dvd burner, and everything else.

At this point I'm not sure what to do... I've tried Gentoo, Ubuntu, Windows, and even tried loading an O/S via a Live Knoppix cd or via a USB version of SLAX. Nothing works! Windows either reboots, BSOD's before it hits the "Starting Windows" part of the installation, and Linux simply just kernel panics before I can try to install anything.

Is there something I'm missing here or something I need to check for?
 
Tried it with 1 hard drive, 1 memory stick.... same issues :( Swapped in ram that definitely works too...
 
I'm gonna try a BIOS upgrade... anyone know how to flash the BIOS if you don't have a floppy drive?
 
Does the memory pass memtest?

I'd also download the MaxBlast software and check out that drive. I had an issue like that with a Maxtor drive and I had to wipe the whole thing out with a low level format even though it passed all the diagnostic tests on the CD. Formatting the HDD in the Windows install didn't work. I thought the drive was broken, but after doing the low level format, I had no issues.
 
How do I run memtest without an O/S... I'm not sure if that's possible through the BIOS... i don't have a floppy drive..
 
memtest hasa downloadable ISO that you burn to CD and then run it off the CD
 
DMystikaLD said:
I'm gonna try a BIOS upgrade... anyone know how to flash the BIOS if you don't have a floppy drive?
Must have floppy to flash bios... they are like <10 on the egg.

Maxtor drives = poop. imo
 
okay -- i just tried it on a raptor drive... no go still. dloading memtest now. But.. it should work, I put DDR2 in there from my other computer which has been running great.
 
memtest was fine on the ram... but theres no way i can get a floppy drive on this thing.. there is no power supply floppy drive power cable.

you know, i had no trouble building an AMD machine... and I switch to intel, and nothing but problems.
 
Dude, I don't know if you had a shuttle or not.. but I'm really hoping I just needed to update the BIOS cause I found a power cable that works...try windows again now.
 
I flash BIOSes without floppys all the time dude

http://bootdisk.com/mexico/flashcd.zip

Download and burn that ISO to a CD-R(W)

Then use NERO or your favorite burning program to copy your award flasher.exe (usually awdflash.exe or aw435934095839.exe) and your BIOS file (usually ends in .bin or .rom)

Boot your computer using the ISO you burnt, then switch CDs, switch to the R: drive and finally flash your BIOS
 
Don't you need a floppy if you're installing on a RAID partition anyway? I'm assuming RAID because you got 2x500GB HDD's.
 
What are your temps on the CPU at idle? Heat sink on their properly? Also, from the pictures on newegg and info from the manufacturer's site, their should be a plug from one 4 pin molex connector, to another 4 pin molex and a floppy connector.
 
Yeah -- I got that working. It was in the box that I didn't see at first.

Temps are around 35C at idle.

I was able to flash my BIOS. But that didn't help, because it didn't fix anything. I'm convinced shuttles just don't support the new Core 2 Duo yet.
 
DMystikaLD said:
Yeah -- I got that working. It was in the box that I didn't see at first.

Temps are around 35C at idle.

I was able to flash my BIOS. But that didn't help, because it didn't fix anything. I'm convinced shuttles just don't support the new Core 2 Duo yet.

If it boots up at all, then it supports C2D. Might be a faulty PSU in that thing.
 
Possible. Weird issues definitely start arising when power supplies start dying. Kinda surprised though.... got Windows to start installing after i took out 1 stick of ram (AFTER the bios update) --- have these systems had any known issues to not work correctly with DDR2 667? I've got 1 stick in there right now and that seemed to help after the BIOS update, but its installing painfully slow.
 
DMystikaLD said:
Possible. Weird issues definitely start arising when power supplies start dying. Kinda surprised though.... got Windows to start installing after i took out 1 stick of ram (AFTER the bios update) --- have these systems had any known issues to not work correctly with DDR2 667? I've got 1 stick in there right now and that seemed to help after the BIOS update, but its installing painfully slow.

What are your memory timings set at? VDimm?
 
the problem where it gets to the splash screen and stops, or gets a blue screen, or you get a blue screen while installing windows is 95% of the time a ram problem. swap around your sticks and try. the other 5% it is a hd problem. if you cant fix it using the ram (try default timings, raise vdimm, 1 stick, etc) swap out your hd and try the install.
good luck.
 
vdimm is set to auto.

yeah.. looks like i needed a bios upgrade (came out yesterday haha) and i had a bad stick of corsair ram. regardless, i'm pissed

linux still won't load btw..
 
stain. said:
Must have floppy to flash bios... they are like <10 on the egg.

Maxtor drives = poop. imo
Sorry Maxtor drives arent crap, i have been using them for 7 years and never had to RMA one, ever.
 
Ok... I bet this is your problem. You are running either RAID or AHCI and have to load the drivers during installation. When installing it'll ask you to hit F6 if you want to load SCSI drivers... hit F6. Then a bit later it'll ask you to insert a floppy with the right drivers... load in your drivers at this point. Just use the RAID drivers and you'll be good to go. I would also make a new disk with updated drivers from Intel.com.

Now.. you can bypass all of this if you set up the IDE Configuration to IDE mode instead of RAID or AHCI. Should work for you.
 
try increasing voltage a bit to both ram and cpu.. as it could be that your psu just isnt cutting the mustard and perhaps fluctuates bad when under load

Power Supply
Power Supply 400W PSU with active PFC

:(


[F]old|[H]ard
 
ThreeDee said:
try increasing voltage a bit to both ram and cpu.. as it could be that your psu just isnt cutting the mustard and perhaps fluctuates bad when under load

Power Supply
Power Supply 400W PSU with active PFC

:(


[F]old|[H]ard

I think he's using a shuttle (IIRC from the OP), so I'm not sure how much PSU flexibility he has.
 
Back
Top