Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I gave ya the like but you're coming up on me fast. My best rigs are off FAH until the challenge for utility bills reasons unless things suddenly pick up. If things finally do I'll be more of a presence on FAH and BOINC again. Thx for all the helpMe Just let me know if there's anything else I can do to help, but otherwise, I'll keep folding as long as I can
nvidia-smi -i 1 -pl xxx
Yes, that Nvidia SMi command will adjust power limit. If you have 6 cards, they will be numbered seemingly at random. You also need a flag I can’t remember offhand to have the configuration applied at boot - otherwise it resets every reboot.I am going to re-configure everything on my benches over my 4 day weekend to align things into the best slots for maximum PPD. A few things were moved around for a nvlink experiment that quickly faded. (just wanted to beat Bastiaan_NL on Superposition easily, but it wouldn't work on 3xxx with the mod for SLI)
One thing I remember from OCN days is how well versed [H] is in Linux. So, I setup Ubuntu 20.04 on everything I have; dual boot. I then enabled coolbits=28, and I'm able to control my fans/clock speeds on each GPU. What I cannot control through the UI for Nvidia X Server Settings is power limits (unless selecting maximum performance does that; doubt it). So, who all has controlled power limits in Ubuntu? If I use terminal, I think I could possibly control the power limit with this command in my bash?replacing xxx with max watts, but is 1 the GPU number? If I have 6, I need 6 entries (0,1,2,3,4,5 replacing 1 in each line)?Code:nvidia-smi -i 1 -pl xxx
But, I'd like to figure this all out, and do some test runs before the event starts. I hope this one is different for you guys, and that it remains interesting until the end. Also, thanks for the nomination, but I literally have done nothing to this point. Maybe an event organizer, or my recruiter, firedfly would be more qualified for the award.
Not that I know of, but I’ve only used it on a 1080ti and a 1660tiDid they ever build GPU in voltage control that you know of?
That syntax isn't valid. Just running nvidia-smi will give the power limit as part of the output, though.i think maybe... if you just run nvidia-smi –pl (no xxx) afterwards it should simply tell you the current power level for each card.. maybe
Have some monster water blocks on those?Yeah, it worked. Thanks guys. I ordered a 1600w P+ to replace the 1300w G+ my 2 3090's are in so I have headroom to oc those more.
Have some monster water blocks on those?
Holy shit. That's a lot of GPUs.... We might need you for this upcoming May BOINC pentathlon challenge alsoDo you guys have a Discord official/unofficial? I'm only in IRC lol
I turned em on at stock clocks for a test run. http://bwg.42web.io/#/summary
Apparently there are database issues at F@H and they are working on it as of Friday. Hopefully they will get this sorted out sometime today. See StefanR5R's post in the anandtech forum for links.You guys know what's going on at F@H and EOC, been 0 for a while now.
Older 472 drivers. CPU is pegged at 100% for those two cards. It's roughly 15 million more PPD, so don't complain! I halted mining to participate and had to reconfigure cards and had issues getting them all going again!The ppd on those 30060 ti's is pretty low. You should be getting close to 3 million each. Are you running the current drivers?
The x1 lane doesn't seem to affect them very much for PPD. I just don't have enough CPU horsepower to feed all of them. The 2080 Super does 2 million or so on an x1 link. The 3070 does about the same on a x1 riser card. I was able to get 5 million PPD from 3080 Ti on x1 riser card when I did some testing before race started.He is running off x1 lane. The rig setup is for mining but I won't complain as this is better than nothing, lol.
My server running older 472 drivers as its the current Win 2008R2//Win 7 driver and its got fairly up to date CUDA and I didnt notice an appreciable change to slightly newer CUDA on my Win 10 rigs so it's staying back where it belongs. Older CUDA definitely showed a drop off for folding but YMMV. You should be good to go with that. If it ain't broke ...Older 472 drivers. CPU is pegged at 100% for those two cards. It's roughly 15 million more PPD, so don't complain! I halted mining to participate and had to reconfigure cards and had issues getting them all going again!
HFM.netJust about to head to bed, but wanted to get some of the heavy hitters crunching. My 3090 seems to have stabilized around 5.2 mil, my 3070 ti & 3060 ti (both lhr) rig seems to be clocking in around 6 mil combined. Tomorrow I will finish the new rig so that will being another 3060 ti online, and on Tuesday a 3090 fe will join in. I wish I could put my two 2070 supers to use, but they are on risers (and that rig has 5x gpu with a lowly amd 965 be - not enough cpu power to push them!)
Is there any easy way to monitor all the ppd of my machines at once?
you should be able to run 1 of them and get about 2 million or so PPD. I have an Athlon 435 triple core that is overwhelmed by two 3060Tis, ut it is good for 2+ million PPDJust about to head to bed, but wanted to get some of the heavy hitters crunching. My 3090 seems to have stabilized around 5.2 mil, my 3070 ti & 3060 ti (both lhr) rig seems to be clocking in around 6 mil combined. Tomorrow I will finish the new rig so that will being another 3060 ti online, and on Tuesday a 3090 fe will join in. I wish I could put my two 2070 supers to use, but they are on risers (and that rig has 5x gpu with a lowly amd 965 be - not enough cpu power to push them!)
Is there any easy way to monitor all the ppd of my machines at once?
I am going to get a massive point update when they do get it online if all the points have been saved but not updating user point totalsWe will start the race when the F@H/EOC stats are back up. Since we passed the original start date and time, no more Team Anandtech members can sign up for the race.
Yes, we all know the stats are down!01.23.22, 9:07am CST |
---|
It's not on my end, the stats feed hasn't updated due to an upstream issue with the F@H servers. According to a twitter post from yesterday (@foldingathome):So we all just have to be patient and let them fix the problem. |