First build & Gigabyte

knightsilver

Limp Gawd
Joined
Aug 5, 2008
Messages
197
The system posted the first time just fine to my relief.

Ill I changed in the BOIS is the Boot order and USB keyboard and mouse.

I cant get past the initail instal of Vista and its slower than dirt.

Gigabyte
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128380

G.Skill
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145

Q6600(stock clock)
Sata DVD-RW(sata 0 port)
RaptorX sata(sata 1 port)
Geforce 250 1GB
PCP&C 750W
Thermaltake Typhoon HSF

And idel CPU temp is 38-40C

What other info do yall need?

Im sure its an IDE or stata thing?

thanks,
shane c.
 
First thing I'd do is load all optimized settings for your BIOS. I know my Gigabyte board was underclocking my CPU to 1.7 ghz in Bios until I switched to optimized settings. I really don't see what changing any of those BIOS settings of yours would have done to slow it down, but you could also just try putting it back at factory defaults, and failing that, resetting the CMOS entirely just to make sure it's not a BIOS problem.
 
I couldnt install Vista, the install process would take too long and the system reset itself.
 
Again, we need more detail. What screen does it hang at? Do you get any alert messages before the reboot?
 
The defaults for your drive setup are not what you want. Set them like this.


SATA AHCI Mode - AHCI
SATA Port0-3 Native Mode - Enabled.

Plug the raptor into port 0 the DVD into port 1 and if you still have a problem move the DVD into port 5 or port 6.

That should solve any drive issues but I am still hearing a tiny alarm bell going off about raptors and some boards/bios. Maybe someone else remembers.


SATA AHCI Mode (Intel ICH10 Southbridge)
Configures the SATA controllers integrated in the Intel ICH10 Southbridge to AHCI mode.
Disabled Disables AHCI for the SATA controllers and configures the SATA controllers to PATA mode. (Default)
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.


SATA Port0-3 Native Mode

Specifies the operating mode of the integrated SATA controllers.
Disabled Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
with other device. Set this option to Disabled if you wish to install operating
systems that do not support Native mode. (Default)
Enabled Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support
Native mode.
 
Back
Top