Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
headless said:No go @ 1T OR 2T @ 1:1, even with voltage boosted to 3.05v, and timings loosened to 3-4-4-8
The box is remembering all of my bios settings now though, boots w/ it's beep instantly instead of pausing on boot and not remembering htt setting.
acroig said:PS: Hurricanes SUCK!!!
AMDZen said:http://www.evga.com/community/messageboard/topic.asp?TOPIC_ID=8259
Thats the biggest problem I've been experiencing with this board. Been unable to find a solution, and since there seems to be more people with this motherboard on this forum, I was wondering if anyone has seen it and can help me out. Anything you can add would be much appreciated. Thanks guys
Nettwerk said:Did you load the nf4 sata/raid drivers or whatever when you were loading the winxp install disk?
Nettwerk said:U live in texas acroig?
Nettwerk said:Its the board dude.. I cant run gskill tccd 1:1 for crap! Im using a divider and 2-2-2- timings till someone fixes this problem
It will boot fine 280+ and it will even say its running the speed I set it to in the bios until windows loads and it misteriously is back at stock speeds.
AMDZen said:As I said in that thread, no I didn't. However it still identified the drive fine and I installed windows fine. I'm currently running windows fine as well, but its D: instead of C:
Not a big deal, but I still don't like to have everything on D: instead of C:
I assume this is because my Windows disc already loaded the SATA drivers I needed. As I understand it, Windows wouldn't have identified and thus, installed itself on my SATA drive if it didn't already have the drivers.
acroig said:Miami dude, where Katrina struck (as a Category 1) before it went to smash the gulf. Hope that everyone in the Texas coast is ready for Rita 'cause she'll be packin' a punch!
headless said:LOL -- MyGuard is showing my CPU @ 72c under full load. I wonder what it really is...
Nettwerk said:Its the board dude.. I cant run gskill tccd 1:1 for crap! Im using a divider and 2-2-2- timings till someone fixes this problem
It will boot fine 280+ and it will even say its running the speed I set it to in the bios until windows loads and it misteriously is back at stock speeds.
nkeney said:I had this same problem until I installed the Athlon 64 Windows XP driver at http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_9706,00.html
Once you install that, it will no longer default back to 5x multiplier. You can then jack with the voltage settings and other settings. Works great. I got my 3500+ overclocked to 2.6Ghz at 1.475v.
Nettwerk said:Yea I live south right outside of Houston and we are going to start boarding the windows tomorrow :/
peacetilence said:Yeah my max load temp is actually lower when my cpu is oced to 2.7+ghz @ 1.55v (the max allowable) than at stock 2.2ghz with the default 1.4v. It seems that temperatures will change 10c on a whim if the voltage fluctautes .01-.02 at all as well. I've read that people do have accurate temps using this board though and comparing to a seperate thermal diode so I still have no idea really if the temps are really accurate or not.
Moto450fyz said:Hi, I just got my new system going last Night, I grabed ClockGen but it says system not supported whice version are you guys using ? I grab the all version one from the download section, is there a Different Version I should be grabing, I dont see this MB or Jet MB in the DL Section. Thanks for any Help you can give me.
Moto450fyz said:Hi, I just got my new system going last Night, I grabed ClockGen but it says system not supported whice version are you guys using ? I grab the all version one from the download section, is there a Different Version I should be grabing, I dont see this MB or Jet MB in the DL Section. Thanks for any Help you can give me.
Moto450fyz said:Thats the one I grabed ,Hum something is not right, I will finish up installing more stuff tonight and try it again. This MB has more overclocking options and is way different then my other MB its a Giga-byte NForce 2 Athlon 2500 + Mobil so it going to take me a bit to figure out how to OC this new MB it was easy to do LOL
Moto450fyz said:Can anyone post a link to DL My Guard, Man I dont know what Im doing wrong but no matter what I set this MB too it allways stays at 3200+ if I raise the fsb any it wont booti dont know what im doing wrong. I think im going to order some different ram I have corsair xms 3200 now but I mite grab some critical Ballistic, any help would be helpful. Thanks.........
Moto450fyz said:Ordered some Critical Ram DDR 4000 see if that helps, I flashed my Bio's and my temps when up 3 c to 37c does MyGuard come close to the right temps ?. And if anyone has a good setup Guide to help me out it I more then thankful my new ram should be here in a few days, but i can't seem to get this thing over stock speeds of the 3200+. Call me a Dumby with this 64 AMD setup
headless said:my xms 3200 wouldn't go above 200mhz @ 1t....ended up running @ 186mhz @ 2-2-2-5-1t. Don't be shocked if she won't boot @ 220+mhz w/ that stuff,