ECS Board?

botw

Gawd
Joined
Jan 13, 2007
Messages
593
As I've mentioned in a couple of posts recently, I fried my current mobo. I just picked up a new gigabyte board and upgraded the processor, but I am considering putting my e6600 into a budget build for my 2 sons. I've got enough parts laying around for pretty much a full system except for a working mainboard.

I'm considering picking up the cheapest (or nearly so) 775 board I can find. Anyone know anything about this ECS offering:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813135063
and whether it would be a complete waste of time. I do not expect any overclocking or advanced feature use in this build.
 
It'll work. I had a Gigabyte G31 board and it was fantastic for the price.

I would just as soon get the ECS as the Intel board. If you're not looking for anything fancy, the ECS will work.
 
ECS offers fantastic value when you get as a combo at Fry's. It does work at stock speeds, rock solid, but they do tend to come DOA (or so I hear). Personally, never had an ECS mobo fail on me, and there were a few that passed through my hands.
 
The ecs board will work fine..ive used them many times for budget builds and never had one that didnt work or didnt last..at stock speeds there fine...everyone gets a bad board every so often from any of these manufacturers so its possible but the odds are with you having a fine board sent to you...
Id go for it if your on a tight budget....
 
Thanks - not so much that I am on a tight budget, but this is just going to be a box for my two young boys to play learning games and music. I don't need anything but a cheap board that won't crash.
 
+1 for the intel board. ESC are find if you're on a budget, but I think the Intel ones are much more reliable.
 
At stock settings, I don't think you'd notice a difference. You might have a slightly better chance of getting a bad ECS board than an Intel board, but even that is very slight.
 
Thanks for all of the comments and suggestions. I'll look things over and pick something up this weekend. ... or I'll ditch it all and sell the e6600 and force the boys to make due with the old AMD 3200 and GeForce 6200 that is keeping me loosely in the AGP club :)
 
I've also used ecs for non oc builds and they always work fine, none of the extra features, like abit uguru or anything, but they work fine, used both 775 and am2+ both worked fine I even bought a 8800gts 512mb from ecs and that was a great card and around 60 bucks cheaper, haven't had much experience with intel besides extremes series mobos.
 
Esc has best price performance ratio, but they are know with 0 overclockabilty and bad bios. If you are simple use and dont think about overcloing buy the ecs otherwise go with cheapest foxconn or biostar boards. They have plenty of overclock option comes with cheap cost.
 
Hello

I just put together my ECS x58 with i7 920 and G.skill ddr3 triple channel 3gb kit.

I went from an Asus K8N-DL and windows xp pro.

I removed all drivers and put the hardware in.

Started the system up and windows worked.

Installed the x58 drivers and here I am.

Wow it was nice not to have to reinstall windows.

I do not like the bios much. It did take some time to get my ram to run at 1333, was stuck at 1066 for a long time.

One thing I did not expect to see is this cpu is a 20x multiplier, but there is a intel turbo setting in the bios and now I have a 21x multiplier, a nice little bonus.

I purchased this board for the price, only needed 2 way sli, not going to do big overclock if any at all.

nice thing but a still a pain, is the cmos reset button, it is on the back of the board.

I did several resets to find the right settings to get my ram to run at 1333.
 
Used ECS in the past, damn horrible boards for reliability, Fry's systems of 3 years ago used them, and they would come back frequently, used them before Fry's back in the UK one particular model had this funny habit of erasing the BIOS and require a flash again (two customers would bring them back every 3-5 months for this problem).
 
Back
Top