DFI MI P55-T36... bios flash... gone wrong

colinstu

2[H]4U
Joined
Oct 11, 2007
Messages
3,563
Well, after getting a basic copy of XP installed and getting the drivers installed, running GPUz I saw that the video card was running in 1x mode... I read up about this problem earlier and remember seeing people talking about flashing the bios.

So, I install the "EZFlash" utility off of the mobo page, found the BIOS update, unzipped the files, w/ the utility I found the .bin file, and I checked the boxes to auto-restart, etc.

So it's going through the process, backing up, etc etc, and then my mouse stops moving at around 20% progress, but the screen is still updating... so I'm like "okay...." so I let it churn some more until the screen is totally frozen and I'm like "fffffff".

So, having no idea what to do, I reboot it, fuck, nothing. It turns off and it turns on again and then off again and will continually cycle. The little POST screen's reading ending up either E9 or 63... not sure which way to look at it. I tried clearing the CMOS w/ both jumpers, etc, and still, the same thing.

What can I do now?!! If I can remedy this, what should I try next? That piece of software seemed waaay too flaky... I should've known better.
 
Bios is probably gone. Need to RMA or get a new bios chip from somewhere (DFI is your best bet).
 
wtf why did u flash in windows?

I always flash in Windows and have never had a problem. I'm talking like 50+ consecutive flashes without a problem. If you're OC isn't stable or something, then it's a bad idea, but if it's running find and prime stable, I don't see a reason not to flash.
 
You are going to have to RMA. Did you reboot right away? Mine froze up too but this is normal and I just waited about 30 seconds.
 
Yea... you never reboot during a BIOS flash... atleast let it sit for a while...

You'll have to RMA it unfortunately... =/
 
Bios is probably gone. Need to RMA or get a new bios chip from somewhere (DFI is your best bet).

RMAing already. I've never flashed a bios before in my 10 years of building computers, it's kind of pathetic, but I've always been scared of "this" right here happening, lol.

I'm flashing because my x16 card was running in x1 mode. Reading the thread about this mobo, people did the flash and it fixed the problem. I saw zero options in the bios to change this number.

I think I'll flash via USB drive next time, how will that go?
 
By the time you get it back from RMA, the bios will probably be current so you won't need to flash.
 
Flashing at the low-level (BIOS) is best because there's less that can go wrong.

But the alternative is that in the Windows level, if you can recover from the BIOS program crashing, you can re-flash it without any harm (As long as you don't restart until you get a successful flash).

BIOS Flashing has always been somewhat iffy... I've yet to have a bad flash thankfully... and I've done HDD's, VGA cards, motherboards... etc.
 
Back
Top