DAN A4-SFX: The smallest gaming case in the world

Hi all! :)
What's the best air cooler for: i7 5960X - AsRock X99 MiniITX ?
Is Dynatron R31 the best choice?
:banghead:
Thanks!
 
Sprogger said:
Was suprised as well, but the ambient temperature was 18C. He posted that 95C was on 4500ghz with 25C ambient and 86C on 4500 with ambient 17C. No notes that it was with I/O or not so i assume its with.

And with NF A9 PWM 25mm fan not 14mm slim one.
Click to expand...

Well temps that low are suspect, but that voltage at 4.7ghz is what is unbelievable.
 
Last edited:
There is at least one case that will be shipped to Japan, so I assume this won't change in the future:
https://www.kick starter.com/projects/33753221/dan-cases-a4-sfx-the-worlds-smallest-gaming-tower/posts/1785776
 
Shaav said:
There is at least one case that will be shipped to Japan, so I assume this won't change in the future:
https://www.kick starter.com/projects/33753221/dan-cases-a4-sfx-the-worlds-smallest-gaming-tower/posts/1785776
Click to expand...

Hey, thanks! I was asking from overclockers.co.uk though. It's really strange but I can't seem to get a real answer from him or the retailers.
 
brianj said:
Hey, thanks! I was asking from overclockers.co.uk though. It's really strange but I can't seem to get a real answer from him or the retailers.
Click to expand...
Can't you just try and order something else from the site and see if it gives you any errors when going through the shipping address process?
 
Hey dondan, Love the case and still trying to get my hands on one and hopefully will in about half a day.

Any update on the windowed kits? still summer 2017? and are you going to add a page on your website to order from around that time?

Is the Nexus LOW-7000 R2 still your favorite? I'm still looking at the Noctua L9I but would like your advice for the case.

have you tried the Jonsbo HP-400 that was on your list yet?
 
MXF5700 said:
Hey dondan, Love the case and still trying to get my hands on one and hopefully will in about half a day.

Any update on the windowed kits? still summer 2017? and are you going to add a page on your website to order from around that time?

Is the Nexus LOW-7000 R2 still your favorite? I'm still looking at the Noctua L9I but would like your advice for the case.

have you tried the Jonsbo HP-400 that was on your list yet?
Click to expand...
It's cool you can get one in a day when kickstarter backers are still waiting on theirs. I've read before that the l9i is good for silent builds but the c7 is optimal for performance.
 
David A4 said:
It's cool you can get one in a day when kickstarter backers are still waiting on theirs. I've read before that the l9i is good for silent builds but the c7 is optimal for performance.
Click to expand...

Thanks for the advice. So in your opinion the c7 is currently best among units under 50mm? I am kinda more interested in performance than silence although I think it's probably best to balance if possible.
 
David A4 said:
It's cool you can get one in a day when kickstarter backers are still waiting on theirs. I've read before that the l9i is good for silent builds but the c7 is optimal for performance.
Click to expand...

We get it... no use to repeat this on each page.

Dan is not a professional, he is managing as he can.
If you are not willing to deal with how a kickstarter project is, just don t participate.
 
MXF5700 said:
Thanks for the advice. So in your opinion the c7 is currently best among units under 50mm? I am kinda more interested in performance than silence although I think it's probably best to balance if possible.
Click to expand...
Then the c7 is the best option i think, there is a graph a couple pages back with all different kinds of combo's, its come to some peoples attention that there can be more noise if a fan is choked next to the ventilation holes
 
David A4 said:
Then the c7 is the best option i think, there is a graph a couple pages back with all different kinds of combo's, its come to some peoples attention that there can be more noise if a fan is choked next to the ventilation holes
Click to expand...
Personally, I am probably going to set the max speed of the C7 to around 2200 rpm. Hopefully, this is enough for an unlocked, undervolted i7 at stock speeds and it will run quiet as well. I am still waiting for zen and am hopeful for an AMD comeback as well as quality mini-itx AM4 motherboards.

I am curious though whether it is worth it to get the 25mm Noctua fan for the Nh-l9i cooler.
 
Last edited:
CknSalad said:
Personally, I am probably going to set the max speed of the C7 to around 2200 rpm. Hopefully, this is enough for an unlocked, undervolted i7 at stock speeds and it will run quiet as well. I am still waiting for zen and am hopeful for an AMD comeback as well as quality mini-itx AM4 motherboards.

I am curious though whether it is worth it to get the 25mm Noctua fan for the Nh-l9i cooler.
Click to expand...

I have been really hand-wringing about that and my conclusion is that if the temps for the 25mm Noctua fan still aren't below the C7, it's not worth it to spend basically double for the Noctua when I can just lower the fan speed of the C7. At the same RPM, if the charts we saw earlier are to be trusted, the C7 gets the same or lower temps than the Noctua with the 25mm fan. Plus the big unknown is how either will sound given both would be pressed right up against the grill. I'd be super disappointed if I spent all the money on my Noctua set up and then was still left with a loud fan AND worse temps. Not to mention the elephant in the room, that whatever GPU I stuff in there is likely to be louder than the CPU fan anyway, and gaming is the only time any of my stuff is going to get loud.
 
illram said:
I have been really hand-wringing about that and my conclusion is that if the temps for the 25mm Noctua fan still aren't below the C7, it's not worth it to spend basically double for the Noctua when I can just lower the fan speed of the C7. At the same RPM, if the charts we saw earlier are to be trusted, the C7 gets the same or lower temps than the Noctua with the 25mm fan. Plus the big unknown is how either will sound given both would be pressed right up against the grill. I'd be super disappointed if I spent all the money on my Noctua set up and then was still left with a loud fan AND worse temps. Not to mention the elephant in the room, that whatever GPU I stuff in there is likely to be louder than the CPU fan anyway, and gaming is the only time any of my stuff is going to get loud.
Click to expand...
I still think the C7 at 2150 rpm give or take will be the cpu of choice for people running unlocked i7s. Depending on which i7 generation, you can have a slight overclock and still undervolt it slightly under the stock voltage since Intel tends to overvolt their cpus just to make sure their cpus are guaranteed to run at those stock/turbo speeds. From what I have seen through the generations, 100-200 mhz overclock near stock voltage should be fairly safe.
 
Just spoke to B and H and it appears the Asus Strix Z270I mobo is scheduled to arrive at their warehouse by 02/07/17. So possible late next week or early next week for anyone that ordered it.
 
dan's e-mail said 12:00 AM ECT Feb 1, which was 4 minutes ago, but overclockers and caseking are not showing it. Dan's website counter is showing 12hrs. :'(
 
Okay so this case is EXACTLY what I've been looking for, for a few years now. I hate how all the other small cases that fit a normal video card are all cubes that still take up too much room on a desk. Since I'm obviously too late for the kickstarter, when do you think I could reasonably buy this somewhere and get it in the US? i skimmed the thread, but this is a loooong thread. :)
 
OldPueblo said:
Okay so this case is EXACTLY what I've been looking for, for a few years now. I hate how all the other small cases that fit a normal video card are all cubes that still take up too much room on a desk. Since I'm obviously too late for the kickstarter, when do you think I could reasonably buy this somewhere and get it in the US? i skimmed the thread, but this is a loooong thread. :)
Click to expand...

It was supposed to go on sale 15 minutes ago.
 
voodosheeb said:
Do to dans website and click the home icon, theres a timer and its ill have a link in about 11hours
Click to expand...

Understood. I'm just going by what Dan's email said and am assuming either the web site clock is off or if not then there is confusion somewhere and it might have accidentally gone on sale at 12AM.
 
swooby said:
Understood. I'm just going by what Dan's email said and am assuming either the web site clock is off or if not then there is confusion somewhere and it might have accidentally gone on sale at 12AM.
Click to expand...
It confused me as well but as long as i dont miss out i dont care what time its at
 
voodosheeb said:
Do to dans website and click the home icon, theres a timer and its ill have a link in about 11hours
Click to expand...

This. Good man. He probably got confused by the AM/PM system (what's the point of that anyway ;) ). Countdown on the website is due to run out at 12PM (noon) Central European Time.
 
For those thinking about cable lengths, if you're buying the new Asus Strix 270I, from the pictures it looks like the 24 pin ATX and SATA inputs are both right next to the PSU, between the RAM and the PSU. Which is great. The 8 pin power EPS socket is along the bottom edge also, which will make cabling nice and tidy. Nothing is going to be reaching across the board, even if you have a SATA SSD or two. Compared to this motherboard for instance, I think it's a much better orientation of all the inputs. Anyway something to think about while I twiddle my thumbs waiting for this case... :D
 
Welp, should not have said that.

This was discussed a couple of pages back, i managed to place a pre-order weeks ago, along with 5 people. Dan then informed Caseking that this was not desired, as everyone should get the same chance, altough our pre-orders could not legally be canceled.

So sadly, it is impossible to place a pre-order now.
 
wow! ...so uou have a pre-order!
what's the price on CaseKing?
...countdown....countdown....countdown :)
- 1:24
Theelichtje said:
Welp, should not have said that.

This was discussed a couple of pages back, i managed to place a pre-order weeks ago, along with 5 people. Dan then informed Caseking that this was not desired, as everyone should get the same chance, altough our pre-orders could not legally be canceled.

So sadly, it is impossible to place a pre-order now.
Click to expand...
 
You must log in or register to reply here.
Back
Top