• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Current rig has the weirdest problem...

V

Vicinity

2[H]4U
Joined
Jan 30, 2009
Messages
3,198
I don't really know where to put this because I don't have any idea what component may be the issue. I'm generally good at finding issues, but this one has me stumped...

I just replaced my videocard, so this is the first time in months I've restarted my computer. I almost forgot it had this problem. When I turn it back on, it won't post. All the fans and everything run at full 100% but it won't boot up to BIOS and post. Black screen and no usb power. If I jingle the power wires in the computer and put it up on it's front side, rather than sitting normal, it MIGHT boot. After replacing the video card, I spent a good hour trying to turn it back on. Otherwise, no go.

Any advice?
 
Does your MB have a speaker? I've worked on some boards that don't have a built in speaker. If you don't have one plugged in you don't notice the post codes :)

Also did I read your post correctly, you had this issue prior to the new video card?
 
Spanks said:
Does your MB have a speaker? I've worked on some boards that don't have a built in speaker. If you don't have one plugged in you don't notice the post codes :)

Also did I read your post correctly, you had this issue prior to the new video card?
Click to expand...

Yes. The solution I ended up using was NEVER turn the computer off. I've had this rendition of my computer for 3 years, and it started 2 years ago, I tried to neatly wire the rats nest coming from the PSU. It had this problem, so I pulled the wires back out from where I had them hidden, problem continued.

Plugging in speaker now, I don't remember if I tried to reset the CMOS or not, but I'll go ahead and try it again.

Cleared CMOS, nothing. Installed speaker, makes no sound.
 
Last edited:
Might be a grounding issue. Follow the steps in the stickied "Basic Troubleshooting Guide" on what to do when the PC does not POST.
 
You must log in or register to reply here.
Back
Top