Zoson
Supreme [H]ardness
- Joined
- Aug 4, 2001
- Messages
- 6,113
Some of you might recall the issues I had with ASUS recently RMAing my P5N-T and having them send me a board that didn't work and had a very obviously blown up capacitor.
Well, I had decided to flash my S2NSE to the latest S2NSE bios since it was newer than the S2E BIOS I had been using. Long story short is the board wrote, verified the bios ok, and then just didn't come back to life(yes I tried the battery trick, which worked on the last bios flash before this one, but did not work this time). So the board was dead and I started a new RMA.
Today I received the replacement board from ASUS, and once again, like the P5N-T, the replacement S2NSE is VERY obviously damaged and/or missed QA completely.
The Images are HUGE. I took them at high res for ASUS's management. Look if you dare!
Damaged Back Panel:
Broken CMOS reset switch
Mangled Esata and slightly damaged firewire.
Note the LCD Poster connection is COMPLETELY snapped off.
http://i144.photobucket.com/albums/r193/zoson/damagedbackpanel.jpg
Damaged Traces Near the PCI slots:
Very visible damaged traces. I noticed this within 1 second of removing the board from its anti static bag.
http://i144.photobucket.com/albums/r193/zoson/damagedtracesbypcie.jpg
Visible signs of a water leak:
http://i144.photobucket.com/albums/r193/zoson/waterspots.jpg
http://i144.photobucket.com/albums/r193/zoson/waterspots2.jpg
Very poorly mounted stack cool II
You can literally see light coming through there... Isn't the cooler supposed to be touching those components? =P
http://i144.photobucket.com/albums/r193/zoson/improperlymountedcooler.jpg
http://i144.photobucket.com/albums/r193/zoson/improperlymountedcooler2.jpg
Once, yeah I can understand shit happens... But this is twice IN A ROW.
Well, I had decided to flash my S2NSE to the latest S2NSE bios since it was newer than the S2E BIOS I had been using. Long story short is the board wrote, verified the bios ok, and then just didn't come back to life(yes I tried the battery trick, which worked on the last bios flash before this one, but did not work this time). So the board was dead and I started a new RMA.
Today I received the replacement board from ASUS, and once again, like the P5N-T, the replacement S2NSE is VERY obviously damaged and/or missed QA completely.
The Images are HUGE. I took them at high res for ASUS's management. Look if you dare!
Damaged Back Panel:
Broken CMOS reset switch
Mangled Esata and slightly damaged firewire.
Note the LCD Poster connection is COMPLETELY snapped off.
http://i144.photobucket.com/albums/r193/zoson/damagedbackpanel.jpg
Damaged Traces Near the PCI slots:
Very visible damaged traces. I noticed this within 1 second of removing the board from its anti static bag.
http://i144.photobucket.com/albums/r193/zoson/damagedtracesbypcie.jpg
Visible signs of a water leak:
http://i144.photobucket.com/albums/r193/zoson/waterspots.jpg
http://i144.photobucket.com/albums/r193/zoson/waterspots2.jpg
Very poorly mounted stack cool II
You can literally see light coming through there... Isn't the cooler supposed to be touching those components? =P
http://i144.photobucket.com/albums/r193/zoson/improperlymountedcooler.jpg
http://i144.photobucket.com/albums/r193/zoson/improperlymountedcooler2.jpg
Once, yeah I can understand shit happens... But this is twice IN A ROW.