- Joined
- May 9, 2008
- Messages
- 1,469
Each time my machine is shutdown it fails to start and the red memory error LED on the motherboard stays lit. I've run Prime95 blend, AIDA64 stress, and Memcheck and they all check out ok. Restarting the machine, resuming from sleep, and everyday stability is fine. To work around this:
*Hold the button to power down
* Start it up and it runs for 2-3 seconds, shutsdown by itself, and restarts to show a failed overclock.
* Enter BIOS and do any number of things ranging from nothing, setting memory to Auto, any of the XMP profiles, or manually set the frequency and timings to looser than factory settings and the result is the same.
Using Corsair Vengeance 1866 memory part number CMZ8GX3M2A1866C9. BIOS is the 1053 beta.
This build is turning out to be the most difficult I've ever done. Other issues I'm having:
http://hardforum.com/showthread.php?t=1577235
*Hold the button to power down
* Start it up and it runs for 2-3 seconds, shutsdown by itself, and restarts to show a failed overclock.
* Enter BIOS and do any number of things ranging from nothing, setting memory to Auto, any of the XMP profiles, or manually set the frequency and timings to looser than factory settings and the result is the same.
Using Corsair Vengeance 1866 memory part number CMZ8GX3M2A1866C9. BIOS is the 1053 beta.
This build is turning out to be the most difficult I've ever done. Other issues I'm having:
http://hardforum.com/showthread.php?t=1577235