So with all the buzz of strapping these AIOs to gpu going around, I decided to give it a try. I was surprised to see that it actually worked!
It was a little harder to connect the bracket than I expected it to be but it all turned out alright!
Card: EVGA 670 gtx ftw
Idle 27C
Temp decrease on load: 10C (This is without my adapter for pwm control by the gfx card-right now they are on the mobo which is only running the fans at about 60%%.)
Noise: At load everything is less than 22db! If the ac is on you can't even hear it!
How quiet is 22db you ask?
that quiet!
Installed
Furmark before install (80% stock fan = noisy):
Furmark after install (60% nocturas = quiet ):
1289/3649 @ 54C
It was a little harder to connect the bracket than I expected it to be but it all turned out alright!
Card: EVGA 670 gtx ftw
Idle 27C
Temp decrease on load: 10C (This is without my adapter for pwm control by the gfx card-right now they are on the mobo which is only running the fans at about 60%%.)
Noise: At load everything is less than 22db! If the ac is on you can't even hear it!
How quiet is 22db you ask?
that quiet!
Installed
Furmark before install (80% stock fan = noisy):
Furmark after install (60% nocturas = quiet ):
1289/3649 @ 54C
Last edited: