• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

A64 OC Database & Overclock Guide

whew! updated. now i have a reason to find the max stable of my opteron. i think somewhere around 2.9ghz with 1.58v is possible :D
 
Nice!! :)

I can run my sandie @ 3ghz with 1.56 vcore but not prime stable... I think I can manage 2.9ghz with 1.54 vcore stable... if my MSI will hold the vcore stready enough.. it's pretty dicy... I need a DFI board.. lol. too busy with FEAR for a mobo swap now. ;)
 
what did i miss? 3091mhz prime stable under phase. you're definitly in there ;)

also, for those of you with an opteron:
i have an additional request: the last 4 numbers of the serial code.

see how i have 0124? i think we might be able to get some statistically relevant data out of this. if not.. well it's worth a try anyway.
opteron OPN
 
I got the X2 3800 today. Its a CBDHE 0532 XPMW. I havent OC'd it yet but ill update this post when i do. For some reason i dont think its ganna do good :(

*edit* apparentlty the neo2 plat with bios 1.b doesnt like to OC. The voltage adjustments dont work, only the % boost thing does. Sooo thats kind of crappy. Its burning in right now at 10x250 at 1.42v. It is on water too so i think its not doing well at all. My friends does 2.6ghz at 1.42v on air :(
We'll see in a few days how this does sine the TIM hasnt broken in yet.

*edit2* ARGHH!!!! Stupid Neo2 Plat w/1.B bios... Since the VID adjustments dont work, the max i can set the vcore to is 1.48v. The system booted at 10x280 w/1.48v but it crashes in windows immediatley. I guess ill have to wait for a better bios or new board. Anyone know when the Sapphire or MSI RDX200 boards will come out?
 
Venice E6:

ADA3200DAA4BW
LBBWE 0528DPDW
2385MHz (265x9) with PQI Turbo 2x512MB DDR500 (TCCD) at 1:1.
1.5V
air cooling with Arctic Freezer 64. 32C idle and 41C full load.
Prime and UCCT stable for hours.

Can post into windows and play games at 2650MHZ but can't get it to prime for even a minute unless i go down to under 2400MHZ, no matter if i use a memory divider or not.

My Winnie was better than this dud (306x8 with memory 1:1 prime stable). Oh well, i bought it as a 3200+, so I can't complain too much.

Opteron 146 on the way from eWiz.
 
Venice E3 3500
ADA3500BPBOX
WBBLE
Best OC 9x296=2664
1.5v @ 47c
Air Cooling w/Zalman CNPS7000Cu
 
San Diego 3700+ e4 im guessing
ADA3700DAA5BN
KABYE 0536GPMW
XXXXXXXXX00075
2.80ghz 255ht x 11
1.53v Read from multimeter
Cooling: Air, XP90 with controlled fan not sure on the CMF at max, its a Dell fan made by Delta and I cant find the specs of it anywhere

Prime ran for 11 hours, its still running BTW

Ill repost if I get higher stable
 
(cf)Eclipse said:
what did i miss? 3091mhz prime stable under phase. you're definitly in there ;)
Click to expand...
ah, sorry dude, was loading images from my local cache. :)
 
HybridHB said:
I got the X2 3800 today. Its a CBDHE 0532 XPMW. I havent OC'd it yet but ill update this post when i do. For some reason i dont think its ganna do good :(

*edit* apparentlty the neo2 plat with bios 1.b doesnt like to OC. The voltage adjustments dont work, only the % boost thing does. Sooo thats kind of crappy. Its burning in right now at 10x250 at 1.42v. It is on water too so i think its not doing well at all. My friends does 2.6ghz at 1.42v on air :(
We'll see in a few days how this does sine the TIM hasnt broken in yet.
Click to expand...


Well, where did you buy it??? (so I know not to buy it from there :D )
 
Opteron 146 CABNE 0530 APMW #114 air cooled by xp-90 w/ U1A Panaflo <--- my old opteron...if it counts for anything

Max stable 295x10= 2950mhz 5:6 divider 1.55 volts.

I have my 027 in sig and I'm working my way up. So far only 230 with 1.175v 1:1
 
Scroatdog said:
Well, where did you buy it??? (so I know not to buy it from there :D )
Click to expand...

Newegg. My buddy got his from there too. Im ganna see how far it can go without going over 1.55v.
 
(cf)Eclipse said:
heh, two 146's eh?

remind me of your cooling again asian ;)
Click to expand...

Yea, I felt that 295x10 wasn't good enough for me. ;) and that one week I just got paid and had some extra cash left over after paying my bills...enough to pick up another one. Didn't even realize the batch # thing until I got the second one. If i did realize it I would have asked him for the one closest to zero :p The new 0027 one is using the ICE cooling from the shuttle. No need to add this to the database as I haven't found the max stable HTT anyways.
 
I(illa Bee said:
San Diego 3700+ e4 im guessing
ADA3700DAA5BN
KABYE 0536GPMW
XXXXXXXXX00075
2.80ghz 255ht x 11
1.53v Read from multimeter
Cooling: Air, XP90 with controlled fan not sure on the CMF at max, its a Dell fan made by Delta and I cant find the specs of it anywhere
Click to expand...

OK, im prime stable at thease settings. I didnt run memtest, but my memory is set to specd settings so there is no reason it can pass...im lazy, and I cant seem to find a floppy disk to go in my floppy drive... arg.... Add me Add me.. iv been waiting sinc eday one of this tread to get a RevE on that list..
 
HybridHB said:
I got the X2 3800 today. Its a CBDHE 0532 XPMW. I havent OC'd it yet but ill update this post when i do. For some reason i dont think its ganna do good :(

*edit* apparentlty the neo2 plat with bios 1.b doesnt like to OC. The voltage adjustments dont work, only the % boost thing does. Sooo thats kind of crappy. Its burning in right now at 10x250 at 1.42v. It is on water too so i think its not doing well at all. My friends does 2.6ghz at 1.42v on air :(
We'll see in a few days how this does sine the TIM hasnt broken in yet.

*edit2* ARGHH!!!! Stupid Neo2 Plat w/1.B bios... Since the VID adjustments dont work, the max i can set the vcore to is 1.48v. The system booted at 10x280 w/1.48v but it crashes in windows immediatley. I guess ill have to wait for a better bios or new board. Anyone know when the Sapphire or MSI RDX200 boards will come out?
Click to expand...


That's a very good overclock. Mine would only do 2.2 stable(2.3 somewhat stable) up to 1.55v.
 
Ok I have a question. It seems that the chips that have an I as the third letter of the OPN have very piss poor overclocks (mine included)...does anyone know what this I means (if anything)?
 
aiit, lemme post my current OC. uhm i can get a SS up here later to boot.

opterown_infoxx.jpg


2.9 ghz » 290x10 » 1.45 vid + 8.3% » reads 1.58 ish with a min of 1.55
150 divider » 2-2-2-10 » ram @ 207

water cooled.

edit: got the SS
 
X2 3800+ Manchester w/ stock cooler
2.4 240x10 works great 1.375v
2.5 250x10 1.425v is my current everyday oc
2.6 260x10 is stable at/around 1.5v but I don't want to do that on stock
2.7 270x10 at 1.55v(max for mobo) loads windows, but gives me a BSOD after a few minutes...


I don't even want to try getting it stable at 2.7 anytime soon but maybe with more cooling later on. I'll post the rest of my info in a bit, looking for some pics I took.


Also I had prolems with it not posting at 9x270 to test things out so I think the multiplier selection may not work.
 
Is there anyway to get the OPN numbers other than actually removing my heatsink?

I got some data for you eclipse, but i want to avoid having to open this biotch up...

anyways, heres the data, except the numbers

http://valid.x86-secret.com/show_oc?id=45158

1.40 vid + 10%
Memory 2.85v 133 divider, 3-4-4-10-2T
HTT 305, 305x9=2745MHz.
On Air.

This is an early venice 3000+...just got my OC finalized. this is prime stable and memtest stable.

System in my sig...
 
Have my X2 3800 Toledo running at:

10 X 250 @ 1.4 with stock cooling

I have a big typhoon on the way. This is a preatty darn OC right?
 
X2 3800+
ADA3800DAA5CD
CCBWE 0535SPMW

Running it at 250x10 at stock volts on air - XP-90 @ 29c in normal Windows environment.
running ram 1:1 2-3-3-7 1T 250mhz 2.8v

That's as high as it would go without upping the cpu voltage. Might give it a try when time allows. ;)

System specs in sig.
 
Roberty said:
X2 3800+
ADA3800DAA5CD
CCBWE 05355PMW

Running it at 250x10 at stock volts on air - XP-90 @ 29c in normal Windows environment.
running ram 1:1 2-3-3-7 1T 250mhz 2.8v

That's as high as it would go without upping the cpu voltage. Might give it a try when time allows. ;)

System specs in sig.
Click to expand...
i don't get it, we have the same week though different stepping, and i had to up my voltage to hit 2.5ghz on water...

and i'm assuming the code on yours is SPMW just like mine, not 5PMW(i don't think thats a code)
 
Elysian said:
i don't get it, we have the same week though different stepping, and i had to up my voltage to hit 2.5ghz on water...

and i'm assuming the code on yours is SPMW just like mine, not 5PMW(i don't think thats a code)
Click to expand...


You have a Manchester. He has a Toledo.
 
Elysian said:
i don't get it, we have the same week though different stepping, and i had to up my voltage to hit 2.5ghz on water...

and i'm assuming the code on yours is SPMW just like mine, not 5PMW(i don't think thats a code)
Click to expand...

Maybe the difference could be the motherboard ? :confused: I'm running an Ultra-D and your running a Epox. Maybe that's the difference.

Your right about mine being SPMW so I changed it in my above post. My eyes aren't what they used to be. ;)
 
Scroatdog said:
You have a Manchester. He has a Toledo.
Click to expand...


How can you tell that mine is a Toledo? Also, I thought all of the 3800's were Manchesters. :confused: Is mine just a faster Toledo with half the cache disabled and rebinned?
 
Roberty said:
How can you tell that mine is a Toledo? Also, I thought all of the 3800's were Manchesters. :confused: Is mine just a faster Toledo with half the cache disabled and rebinned?
Click to expand...
look at the last two letters of the first line of the OPN
CD = Toledo
BV = Manchester

;)

i'll update this soon :cool:
 
Presto88 said:
Have my X2 3800 Toledo running at:

10 X 250 @ 1.4 with stock cooling

I have a big typhoon on the way. This is a preatty darn OC right?
Click to expand...

Yes, that's a good clock -- I've got one 3800+ that does this at 1.31 VCore on an XP-90
 
Roberty said:
Maybe the difference could be the motherboard ? :confused: I'm running an Ultra-D and your running a Epox. Maybe that's the difference.

Your right about mine being SPMW so I changed it in my above post. My eyes aren't what they used to be. ;)
Click to expand...


my epox board did pretty well with the venice 3000+@2.8ghz, after that overclocking experience i can't really fault the mobo
 
ADA3000DAA4BP
LBBLE 0519CPFW

Should be coming later this week or early next week. Plan on using my XP90C & Delta 120mm on it. If it turns out to be a good OC, I may rip the waterchill from my Newcastle system and test it with water too . . .

Results soon, haven't heard good things about week 19 in general, but I have my fingers crossed . . .
 
OK, here is my contribution:

Opteron 148 CABYE stepping

OSA148DAA5BN
CABYE 0528GPMW
*******G50066

Stable Overclock...12 Hours on Blend torture test...

Multiplier : 11
FSB: 263.4
Speed: 2897.2
Vcore: 1.55V

Load temp: 39C
System temp: 31C


Have screen capture but don't know how to post.

Add one to the list.
 
Coming out of the closet :D, long time lurker attempting first OC. Spent a few hours over the last couple evenings but hitting wall at 270x9. More testing this weekend with HTT and memory timings as it appears CPU is capable of more.

ADA3000DAA4BP
LBBLE 0524APGW
Z705966F51681

270x9 Prime95 torture test stable @ 41C Stock Cooling 1.45v core but BF2 Graphics tearing badly. Mem voltage set to high (ASROCK only has high setting)
260x9 Prime95 stable. BF2 random crash
255x9 Stable

166MHz divider 2.5 2 2 8 @ 260 & 270x9
200MHz @ 255x9

3K+Venice
ASROCK Dual SATA2
2x512 OCZ PC3200 VX DC
ATI X800XL 256 AGP
WD80
Neo Power 480
 
Superduty, did you test your MB's max FSB?

See the very first post for instructions if you need them.
 
Gadfly,

Not exactly. The problem is that I can't find a compatible version of Clockgen for the ASROCK Dual. So, I've been loosely following the procedure via. the bios.
 
You must log in or register to reply here.
Back
Top