DangerIsGo
2[H]4U
- Joined
- Apr 16, 2005
- Messages
- 3,000
So Im planning on selling my 7900GTs to make way for G80. I have a 7900GT CO and a 7900GT KO SC. The COs temps are what they should be for a WCed case (60ish under load while 50C idle) I measure 1.2v on the core on and off load.
As far as the KO SC goes, I have a problem. Idle, its cooler than the CO on idle right how (52 vs 55C) but load, it gets as hot as 90C. Both cards were volt modded and WCed, but I took off the WCing and the volt mods (conductive pen) and everything is at stock now (for the KO SC cores at 580) I measured the volts idle and its 1.2, but it goes to 1.45 under load, is that normal for all SCs (pref the KO series)? According to NiBiTor, 2D is 1.2, and 3D is 1.45 but Im wondering, is that normal? I can set 1.2 for the 3D but i dont know if that will mess up the stock Oc of 580. Please help as Im wanting to game but not with these temps. Hell it was 99+ before i reseated the HSF (which I thought that was the problem) BTW its a 256-P2-N567-AX Should I RMA it? Recently it just started to run really hot with my WC block on it (I thought it was because I took the block off and just reseat it wrong and didnt feel like fixing it ) but looks like i seat it right and somethings up with the card.
As far as the KO SC goes, I have a problem. Idle, its cooler than the CO on idle right how (52 vs 55C) but load, it gets as hot as 90C. Both cards were volt modded and WCed, but I took off the WCing and the volt mods (conductive pen) and everything is at stock now (for the KO SC cores at 580) I measured the volts idle and its 1.2, but it goes to 1.45 under load, is that normal for all SCs (pref the KO series)? According to NiBiTor, 2D is 1.2, and 3D is 1.45 but Im wondering, is that normal? I can set 1.2 for the 3D but i dont know if that will mess up the stock Oc of 580. Please help as Im wanting to game but not with these temps. Hell it was 99+ before i reseated the HSF (which I thought that was the problem) BTW its a 256-P2-N567-AX Should I RMA it? Recently it just started to run really hot with my WC block on it (I thought it was because I took the block off and just reseat it wrong and didnt feel like fixing it ) but looks like i seat it right and somethings up with the card.