• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

2005 Post Your Workstation

Status
Not open for further replies.
Goat_187 said:
I want that! whats your addess? :D


what the touch screen for? lets see some picsof your rig.
Click to expand...

I bet you do. It is pretty sweet playing xbox in life size. Touchscreen LCD is for the server cube box. I also have a wireless logictech keyboard/mouse that goes to the server box.

What part do you wanna see pics of?

-TeedOff
 
lesman said:
I beleive it's to prevent abrasion and/or skid marks to the desk surface.
Click to expand...

Correct. Just built the desk in the last couple weeks, so I wanted to keep the top scratch free for a while. Nice thing is that is does double as a mouse pad :D
 
Before :

6023123_2384.JPG


After :

6023cm-5er-pack.jpg


6023desk-helljpg.jpg


6023desk-dunkel.jpg


- Cleaned up cable mess
- Moved desktop towards the wall
- Relocated Switch and 4-Port KVM
- New keyboard, mouse and mousepad (arrived today)
 
Whats up with all those boxes under the desk? Is that beautiful case on top not being used?
 
TeedOff said:
Correct. Just built the desk in the last couple weeks, so I wanted to keep the top scratch free for a while. Nice thing is that is does double as a mouse pad :D
Click to expand...
Nice touch...always good to think ahead like that!
 
theshadow27 said:
if you dust 3 times a week AND underclock AND use vapor cooling AND watercool every chip on your mobo, your comp could last FOREVER!!! w00t
Click to expand...

Gah, this is how it is done:

shuttle5.jpg



there is enough voltage pumping through that baby to deep fry a small animal in artic silver :D

underclock shmareclok pfff
 
mohammedtaha said:
How did you cut that off ? Your teeth ? You can't cut straight ? How about sanding after cutting so you won't drown in your own blood.
Click to expand...


bahhaha that's hella comedy.
 
mohammedtaha said:
How did you cut that off ? Your teeth ? You can't cut straight ? How about sanding after cutting so you won't drown in your own blood.
Click to expand...


glad you like it :D
 
bern said:
Anarchy is that the steelpad QcK+? Isnt it made out of cloth material?
Click to expand...

Yes and yes ... i replaced my Ratpadz with it and it's pretty nice, but i habemn't played any games on it yet ...
 
1.jpg

2.jpg


I think I need some drive enclosures which aren't quite so ugly. And no, I'm not using that subwoofer with those speakers. It's just a footrest.
 
mritche said:
I think I need some drive enclosures which aren't quite so ugly.
Click to expand...


No, I think you should give your stuff to me.


Sir, your set-up owns. Props. Only gripe is the iSoap.
 
you are watching one of my favorite shows (House) :)

i have all of the episodes that have aired so far recorded on my PC in high-def
 
Well, I will get unlazy and post my workstations.

HOME:

LCD19.JPG

Samsung 19" LCD

LAPSHUTTLE.JPG

Shuttle in sig
Toshiba A35-S1592

SERVER.JPG

File Server in sig

whole.JPG

^Sorry about that pic^

Future is a nice audio system and WC for the shuttle.
 
Damn I don't see how people can afford comps that nice. Plus a laptop. I guess its pretty hard only working one day a week for two hours only making about $15-20 an hour.
 
That's a full-time job + part-time job + wheeling and dealing in car parts too. Along with going to college full time. Needless to say I can't wait until tonight when I can walk down the aisle to graduate and not go back EVAR!!!
 
I never want to leave college, i don't really see how people could possiably be really excited about graduating. i am having the time of my life here, and if i could I would stay at least a few more years. maybe i will just have to get my masters so i can spend some more time here.


really nice looking setup by the way
 
Pkirk618 said:


by the way, that chair has been redone with that material. I seem to go with this color often. I also enjoy lamp type lighting to create that "at home" feeling.

What'd ya think?
Click to expand...

from that pic., it looks like the tv is about to drop
 
TeedOff said:
I bet you do. It is pretty sweet playing xbox in life size. Touchscreen LCD is for the server cube box. I also have a wireless logictech keyboard/mouse that goes to the server box.

What part do you wanna see pics of?

-TeedOff
Click to expand...


the "highly modded" one.
 
TUKIN18S said:
That's a full-time job + part-time job + wheeling and dealing in car parts too. Along with going to college full time. Needless to say I can't wait until tonight when I can walk down the aisle to graduate and not go back EVAR!!!
Click to expand...
Congrats man.
 
Goat_187 said:
the "highly modded" one.
Click to expand...
Of course...

Before:

sn85g4v3.jpg


After:

front.jpg


overview.jpg


top.jpg


Details:
1. Convert SN41G2 chassis to take sn85 mobo and SilenX PS
2. Arctic Silver 5 on the heat sink
3. Remove rear grill and c-strip the opening
4. Blowhole with red LED fan
5. Textured paint job for the cover (Rustoleum Hand hammered paint)
6. Paint front panel I/O bracket (in case it showed)
7. Added a hard drive cooler to keep the Raptor running cool
8. Mod SN41G2 front bezel to fit sn85 front port assembly
9. Matching paint job on bezel
10, Custom front faceplate (front panel express) and paint
11. Bulgin LED power on and reset switches
12. Front mount fan to provide a cool air intake

My objectives/requirements for this mod were:
1. Improve the looks over the G4 case (IMHO)
2. Improve cooling over stock
3. Had to still fit in the Shuttle bag, so no external fans

Of course objective 1 is, well, objective (pun intended). I like the new look a lot better but opinions vary.

As far as objective 2 goes, here are the results (70 deg F ambient temp)

At idle: PWM/SYS/CPU == 42/38/37
After gaming for 2 hours: PWM/SYS/CPU == 53/44/44

After adding the fans, my max temps are actually lower than where I started for idle temps. Before the mods, I was seeing 54/48/46 at idle.

-TeedOff
 
corebreach said:
@mritche: do you have heat dissapation issues with the receiver in that orientation?
Click to expand...

Not really. The receiver puts out very little heat and I leave a tiny bit of space between it and the desk.
 
i was wondering where did you get the bulgin switches? i want to get one for my PC but they are like 20 bucks a piece.


TeedOff said:
Of course...

Before:

http://www.shuttle.com/share/simages/productimages_small/sn85g4v3.jpg
After:

http://teedoffweb.com/pics/mods/front.jpg

http://teedoffweb.com/pics/mods/overview.jpg

http://teedoffweb.com/pics/mods/top.jpg

Details:
1. Convert SN41G2 chassis to take sn85 mobo and SilenX PS
2. Arctic Silver 5 on the heat sink
3. Remove rear grill and c-strip the opening
4. Blowhole with red LED fan
5. Textured paint job for the cover (Rustoleum Hand hammered paint)
6. Paint front panel I/O bracket (in case it showed)
7. Added a hard drive cooler to keep the Raptor running cool
8. Mod SN41G2 front bezel to fit sn85 front port assembly
9. Matching paint job on bezel
10, Custom front faceplate (front panel express) and paint
11. Bulgin LED power on and reset switches
12. Front mount fan to provide a cool air intake

My objectives/requirements for this mod were:
1. Improve the looks over the G4 case (IMHO)
2. Improve cooling over stock
3. Had to still fit in the Shuttle bag, so no external fans

Of course objective 1 is, well, objective (pun intended). I like the new look a lot better but opinions vary.

As far as objective 2 goes, here are the results (70 deg F ambient temp)

At idle: PWM/SYS/CPU == 42/38/37
After gaming for 2 hours: PWM/SYS/CPU == 53/44/44

After adding the fans, my max temps are actually lower than where I started for idle temps. Before the mods, I was seeing 54/48/46 at idle.

-TeedOff
Click to expand...
 
chronic9 said:
i was wondering where did you get the bulgin switches? i want to get one for my PC but they are like 20 bucks a piece.
Click to expand...

I got them from here. Look under "DIY" then "Switches". They have a variety of Bulgin switches from around $14 to $20.

-TeedOff
 
Ok....I moved into a new apartment...and, as I said vefore, I got a new desk and chair...(it's about damn time...) anyone who remembers my posts from before will know that my old desk was a hunk of poo and the chair (well....square little storage thingy that is able to be sat on) is replaced with a chair with an actual BACK ON IT!!! Now that's awesome news for my back...anywho, here it is now...oh yeah, just got a scanner too..and the saitek eclipse.

DSCF1334.JPG


DSCF1335.JPG


DSCF1336.JPG
:)
 
looks much nicer than it did before, now you just need a bigger LCD to fill that empty space around yours ;)


nice setup, i can't wait to get my first house/apartment and move out of these dorms
 
compslckr said:
looks much nicer than it did before, now you just need a bigger LCD to fill that empty space around yours ;)


nice setup, i can't wait to get my first house/apartment and move out of these dorms
Click to expand...
Thank you! Yeah...I really do need to get a bigger LCD...I already have one targeted. I'm going to get a 17" no matter what, but no bigger. I don't really want a huge monitor or anything. I'd rather have dual monitor or something.
 
My setup, Shuttle SN95G5 with dell 2001fp , SGI mod to p4 based system, and a Apple Powerbook 12in superdrive 1.5ghz


DSCF0981.jpg


DSCF1266.jpg


DSCF1264.jpg


DSCF1267.jpg
 
Status
Not open for further replies.
Back
Top