Search results

I only wanted to see his potential :P I am running it without OC, I don't want to damage it :D

thx I have seen now the problem :( sad , I want ECC I will search more :D 1 question here :D I have found these ECC R DDR3 at 149 euro and I can't find ECC U DDR3 only above 250 euro , any one knows why is such a big difference ?

hi all. I hope that some one can help me I have http://valid.canardpc.com/2828775 that is not OCed now , and I just both 6 x 4GB 240p PC3-10600 CL9 DDR3-1333 2Rx4 1.5V ECC RDIMM Samsung, M393B5170EH1-CH9Q1 . the BIG Problem is that it wont start (no POST, no BIOS) with these RAMs I tried them...

the TJ max was 90 I changed it to 80 :( sorry if is my doing :D, I wase still looking in ASUS AI suite and the temp wase lower than in 168*25 (temp was 70) and I was at 50 to 60 in 160*25 - Voltage is on Auto

-- well 12 threads 46H and 39min of successful test :) I am happy that I can use it at 4GHz :D. The RAMS test will wait for a wile sorry , gest got some ather good news and have to invest there a looooooooot of gold :))

155x25 is 3875MHz only with 415 higher than Max Turbo Frequency 3.46 GHz I am running now the Prime test for more than 24H at 160x25 (4000MHz)and I am feeling lucky even if I get an error now is ok or not ? I am not planning just yet to use it more than 24H a day. --- -- I will still run...

no good in 24H I still got 1 error :( [Tue May 14 19:35:48 2013] Self-test 24K passed! Self-test 1120K passed! Self-test 24K passed! Self-test 24K passed! Self-test 32K passed! FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected

I have made the Prime Test - - Some where on the way looks like this - - - - I had to stop it a little early because I found in the result 5 x FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. - - - - wase running at 168x25 - - I am...

at the moment it is more than arm and leg for me but I have a friend and I will ask him if he can give me some sticks to test ::D I will post again lather with the result :D ;)

May be I can test it for u =)) how expensive was the kit ? :P

I read somewhere that the processor would reach maximum potential 6xRAM (1 for each CPU I think)

I need ECC ? and my only wish whose to make inside 8Gx6 , to take advantage of the Max Memory Bandwidth 32 GB/s. Is Intel® Turbo Boost Technology a good thing ? :D always fixing my Clock speed ? Intel® QPI Speed 6.4 GT/s nr. of QPI Links 2 that means 2x 6.4GT/s or 2x 3.2GT/s ? My CUP-Z...

----- thx for the help :) I think I will give it a try for 6x4G Kit :) thx a lot for the link

Guys million dollar question for me :D, this guy here is using 6x8GB Crucial DDR-III/1600 CL9 (1600MHz) on X58 with i7 980X Max Memory Size (dependent on memory type) 24 GB Memory Types DDR3-1066 on intel web site. can this be ?

Latency , please tell me what thows nr. mean :) and Memory

my RAMs are running at 504MHz, I read on the internet that I need to multiply it x2 , so it runs on 1008 out of 1333 ----------- the test that I do I hope is the right one because it takes forever to end it :( in 21H and only 1,35%, tomorrow at this time I will end it ( I am very confident...

and I wold like to take advantage of Max Memory Bandwidth 32 GB/s that the CUP can give. I found this Youtube Video of an x58 chipset with 48GB RAM, and The result of the test I also found this diagram , dont realy know if it helps :D I read that I can try with one card 8GB, if it...

will do so thx :)

Restarted the test with 12 logical CPU ( Threads I think) and 7365MBs RAMs (maxim that allows me. CPU T it goes up and doun from 66 to 70 so far.

can you please tell me what program to use for this test?

I am running the Prime95 program now with no problem so far Regarding RAMs I will use 4GBs x 6Slots @ 1333 and if I do not like it I will consider an upgrade to 8GBs X 6Slots @ 1333 (that if higher frequency is not possible :( ) And regarding Prime95 I want also to finish the test that will...

http://valid.canardpc.com/cache/banner/2789737.png

Hi all, I just built a new PC and I am pleased with it but I do not understand it PROC - Intel® Xeon® Processor X5675 (12M Cache, 3.06 GHz, 6.40 GT/s Intel® QPI) RAM - 8GB (2x4GB) cmv8gx3m2a1333c9 MB - P6X58E_WS VIDEO - ATI RADEON HD 7750 CLUB PS - TAURO 600W HDD - 120G Hitachi...

Thx all , especialy scharfshutze009 and DualAmdMp.

English is not my first language and I know I suck at it :( . I want to use it for picrures , music and some films (storage and Networking sharing) no industrial use :) , CAD programing is LOW to the noob side I am using FreeCAD just learning :) I want to use this Procesor that's why I...

:) thx DualAmdMp, I whasent shore where to ask, so I searched the forrum a litle and here is where I ended :( sorry if I am wrong. I have that Proc and I whant to use it :) if the MB is bad I can go for Z8NAD6C or Z8NAD6 but since I have only one I founded X58 MB a good deal , I am trying to...

thx (is a 2011 q1 model ;) ) I see no motive not to use it :( : -Intel® Smart Cache 12 MB -# of Cores 6 -# of Threads 12 -Max Memory Bandwidth 32 GB/s -Lithography 32 nm -Launch Date Q1'11 +Recommended Customer Price TRAY: $1440.00 BOX : $1443.00 -selling it goes to 500$ if I am lucky...

Hello all, I am new to this forum and quite new to PC biding too. The thing is that I have an progcesor and I am not shore how to use it :). here it is what I am thinking: -Procesor Intel Xeon X5675 12M Cache 3.06 GHz 6.40-GTs Intel QPI -I have no heat sink so I accept any sugestions -MB ASUS...