I think I've just had a long day and I'm clearly missing something.
However, I've setup a new v3700. The problem is that I can't get two hosts to use the same volumes(two ESXi 5.1 hosts). They can both see the volumes, but only one can mount them at a time.
Is there some sort of tick box I...
Hi Everyone,
I'm after recommendations for a motherboard. Basically, all it needs is the following:
2 x PCI-E 3.0 8x lanes
Onboard video
Onboard NIC (2 would be good)
Socket 2011
Hex core support(Doesn't have to be too powerful)
Basically, this new server will run 4 VMs which act as...
Okay, I've decided to go for a 4 disk raid 6 as my requirements have dropped. 8TB will be more than enough.
I was looking at WD red 4TB disks as they're designed to be on 24/7. What I don't like about them is that they can change their RPM rate. How does a raid controller deal with that...
I have also found that WD have put out 4TB disks that are 10^15 URE
http://www.wdc.com/wdproducts/library/SpecSheet/ENG/2879-771475.pdf
I think these in a raid 6 would make me feel a lot better for a small array :)
Thanks,
I'm basically after a 9+ TB array that I can map to a single VM. I have an ESXi 5.5 host with an LSI 9260-8i raid controller. I would like to create an array that I can use for this VM as a backup location for other computers.
I was going to(due to my lack of understanding) create...
Thank you
I understand the basic raid concepts. It was the URE that threw me off everything as I had been unaware of it before. I was about to create a 4 disk R5 with one hot spare (4 x 4TB) until I read the dangers about it
Thanks,
Would a raid 10 not be safer? Especially if I were to run a hot spare?
I plan on having an old server that I turn on once a month running storage spaces as the backup(I won't need the performance etc for that one)
Hi Everyone
I was hoping to get opinions on the drive capacity vs Raid 5/6 issue.
My understanding is that a URE will occur on a standard disk for around 12TB in a R5.
(source: http://www.zdnet.com/blog/storage/why-raid-6-stops-working-in-2019/805)
Has anyone found issues with this...
Hi Everyone
I was wondering if anyone has/had found a chipset on a mini-itx board that works well with Debian based distros?
The only real requirement is that the PC can play 1080P streams from youtube and a plex server(where the transcoding is all done on the server)
I was leaning...
Hi Everyone
I'm after a motherboard which will act as a big file server. The only real requirement is that it has 2x PCIE slots running at 8x or higher as we have two Intel raid cards that need to be utilized in this machine.
Any recommendations?
I was looking at this...
Ah thank you. The problem I have is that ports A & B must be on different subnets for the controllers(It's a forced requirement).
We do have two controllers(which I failed to mention. Apologies). However the LUNs that are having performance issues are mapped to one controller only(you can't...
Ah sorry, yes I did. It didn't seem to work.
Interestingly though, if I add a second VMkernel to the NIC that works, that one also has the same problem
I've done a bit of reading about the recommended setup and have come across mixed information.
I am aware that I have to assign a VMK to each NIC, the question is, what is the limitations?
Can I have 4 NICs with a VMK each?
The reason I ask is that I have found that subnetting can cause a...
ESXi can see all of the nics. It's just that only the first one will work. It's quite weird(The NIC with the lowest number is only pingable from other machines on that network, every other NIC doesn't seem to be reachable despite what network I put it on)
This little problem is beginning to drive me up the wall.
I have a physical ESXi host, with ESXi virtualized inside it for Lab/testing purposes(I don't run up a lot of VMs, it's more for CLI and configuration testing/education).
The problem I have, is that I can't seem to get more than one...
I have an ESXi 5.1 server connected to an ISCSI unit. I'm attempting to reduce latency issues. How has everyone set their units up?
I currently have two physical NICs with two VMKs attached to each. which map to two ports on the ISCSI unit(each VMK is on a different VLAN as each port on the...
Just spoke to apple again. I managed to get through to someone who was very helpful. I ended up on a 3 way conference call, and they all then went away and got back to me the next day.
Result? 2 VMs per mac host. He seemed to hint that it may change in the future, but for now I'm stuck with a...
Has anyone managed to find a manual for this PSU? I'd like to know what the additional connectors are for, (picture attached)
imageHere
I'm hoping one will connect to the MB so that it knows when it has failed
"to install, use and run up to two (2) additional copies or instances of the Apple Software
within virtual operating system environments on each Mac Computer you own or control that is
already running the Apple Software, for purposes of: (a) software development; (b) testing
during...
It's for our development team. We've managed to get away with one iMac in the office for a while, but we really need a lot of environments for testing now
Yep, Just spoke to apple(after waiting days to find someone who knew anything about it). I'm going to dump this project. 2 VMs per host is a complete waste of money and resources :mad:
I'm looking at a mac pro so that i can legitimately virtualize OS X.
From what I understand:
Apple hardware must be used as the host(which is easy enough)
Only OS X 10.5-10.8 can be virtualized as server edition
Only OS X 10.7-10.8 can be virtualized as client edition
The installable...
I know this!
You want a board with one of these chipsets for VT-D:
Chipset Desktop Board
Q77 DQ77KB, DQ77MK
B75 DB75EN
Q67 DQ67EP; DQ67OW; DQ67SW
Q57 DQ57TM; DQ57TML
Q45 DQ45CB; DQ45EK
Q35 DQ35JO; DQ35MP
Yep I agree 100% with you. "Virtualization" just means VT-X., VT-D has to be specifically mentioned.
I'm just looking for a 1155 motherboard that I can grab off the shelf which will work. Having raid not supported is ok, I have a PCI-E raid card for that.
Thank you for the input guys, it's much...
I've upgraded the bios to the latest (F7) on the gigabyte board. However VT-D still doesn't seem to be supported :(
I also found that the HP computer has an H61 chipset which doesn't support VT-D.
In terms of a 1155 motherboard, what should I be looking for? The only credible information...