Search results

  1. C

    My Experience with ModderSmart.com(Voyeurmods)

    I have had similar problems in the past, but only one quite as bad as yours. case-mod.com I will never shop or buy anything from them again. I ordered a case, which came to like $97 CDN, and they didnt include shipping costs in the total, so I waited for about two weeks and finally decided to...
  2. C

    Very little rust before the paint... What do I do now?

    Yes, but it would have to be in really really humid room for it to make a huge impact.
  3. C

    Very little rust before the paint... What do I do now?

    One question, how did you get rust on it? Was it sitting outside or something? And you are on the right track, but make sure you get all of the rust off, and use the right primer, which is what you have I am sure, or it will come back.
  4. C

    Shuttle cases?

    No it went lots of places, i just wasnt sure of what cases were out there, i thought someone would point me in the direction of a shuttle case other then....shuttle brand. I dont really want to buy a barebone PC with the mobo in it already.
  5. C

    Shuttle cases?

    lol I was looking at them earlier, thanks :)
  6. C

    Shuttle cases?

    any suggestions for a case/mobo?
  7. C

    Shuttle cases?

    Not looking to upgrade that soon, I would be fine using AGP. Buget is probably aroud 500 bucks, if not a little more.
  8. C

    Shuttle cases?

    alright, im looking for an amd system, not top of the line thats for sure, just something my sister can do her homework on and chat, no heavy gaming necessary
  9. C

    Shuttle cases?

    sorry I meant to put shuttle :eek:
  10. C

    Shuttle cases?

    bump!
  11. C

    Shuttle cases?

    Could someone point me in the direction of a nice easy to work with shuttle case please?
  12. C

    Project Cube - 56k death

    thats sexy, the wiring looks crazy though :p
  13. C

    Best/Worst Things to happen to the Modding Scene

    even if its plugged in, that light helps alot of people troubleshoot because even if it is plugged in and turned on, if that light is off, it most likely means your PSU is shot, or your motherboard is toast.
  14. C

    Best/Worst Things to happen to the Modding Scene

    the people that are troubleshooting their pcs do...
  15. C

    Scored a new case...

    looks beefy, definately moddable. Looks like it would be killer for a water cooled setup. EDIT: heres another picture I found.
  16. C

    Modding my closet...

    The power supply is supposed to ground your computer anyways, its bare components that are not connected that you have to worry about. As for cooling, I would just put a room fan in there, there will be more than enough room for air to move, so I wouldn't worry about it too much, as long as they...
  17. C

    Modding my closet...

    they are acctually called toggle anchors, and can be found at http://www.mcmaster.com/
  18. C

    Modding my closet...

    What you could use is those metal butterfly anchors that spread out to 180 degrees when you release them, with a rubber grommet or washer underneath the mobo, the screws that they use for those are pretty thin, so they should fit no problem. Thats what I would do.
  19. C

    Modding my closet...

    No and no, unless you are using metallic paint, im pretty sure sheetrock is an insulator you shouldnt have any problems, but it doesnt hurt to put rubber grommets under your screws.
  20. C

    Why are Cases Crappy?

    ive owned a chieftec dragon case for a couple months now, its pretty dan close to perfect, except the reset button is so dang hard to push.
  21. C

    Cold Cathode UV vs. normal UV lights ?

    cathodes are just easier because you can connect them using molex connectors, I don't see a problem with a regular uv light in your case, besides the fact that it is bigger, and you can always just cut a hole in the back for the power chord.
  22. C

    Best place to buy case lighting

    sometimes you have to pay extra for customer service, I know I would.
  23. C

    Best place to buy case lighting

    http://www.vibelights.com/index.html they have very nice aluminum inverters, and are pretty cheap with a replacement guarentee
  24. C

    Adding wire/Lengthening wires...

    I have hear speaker wire works fine, but I would need someone to back me up on that. :p
  25. C

    Chieftec/ChenMing Dragon Case

    ah found it, the prescott edition comes with the 120mm fan and the regular comes with the two 80mms, I'm going to email NCIX and see which one they are shipping, the site hasn't been updated for a while so we will see, thanks anyways. :)
  26. C

    Chieftec/ChenMing Dragon Case

    Just a question to the owners of the NEW version of this case, the fan mounts in front of the HD cages are 80mm I'm pretty sure, and the window fan is what size, I need to know so I can order new fans while I order the case. I'm pretty sure it comes with the 120mm fan at the back now, instead of...
  27. C

    Mac OS vs. Windows

    I'm not a big fan of the AGP/PCI boards, last time I checked they didnt work that great, and were really unstable. Lots could have happened in 3 months though.
  28. C

    What's the difference between these two Lian-Li on NewEgg?

    ones an ATX and the other is a server
  29. C

    Which fan filter

    A thing you have to remember though, is that the filters do reduce airflow into and out of your case and raise temperatures a little bit, but with all that built up dust on the inside instead, that could not just heat up your computer but cause other problems as well, its kinda a catch 22.
  30. C

    Stacker STC101 Build

    just wondering about the stacker though, how much dust etc gets in the mesh in the front?
  31. C

    Electric disc mod

    the only thing I would be worried about is not grounding it. Put some rubber grommets where the screws go in and you should be fine
  32. C

    Need some help choosing

    anyone?
  33. C

    Need some help choosing

    Hey guys and gals, I'm new to the forums and I love it so far. Heres my dilemma. I wanna make my comp nice and UV reactive, but with a new case. The one i have now is an old no name junker with good parts in it. I was wondering if a whole acrylic case would be the way to go, but I havent...
Back
Top