Search results

Time for some more stuff to sell. Up for sale is a Swiftech GTZ waterblock that is just sitting around and not being used so it has to go. I only used it once then switched over to an HK block. The Koolance waterblock is for the dual pcb version of the 295 and it comes with all the accessories...

Time for some more stuff to sell. Up for sale is an EVGA GTX 295 that currently has a Koolance NX295 waterblock on it. I'm selling both as a combo but am willing to part out if there's any interest. I also have a Swiftech GTZ waterblock that is just sitting around and not being used so that has...

*SOLD*

I just setup my watercooling build at the beginning of this week and I have a quick question for anyone who has a mcp355, how long did it take to bleed out the air bubbles? I have two loops running my system which are: CPU Loop - Ek Multi Res -> MCP355 w/ XSPC Top -> XSPC 360 Radiator ->...

SOLD

*SOLD*

I just downloaded and installed the newest nvidia drivers 177.83 and everything installed fine. Then I installed rivatuner and set all my fan profiles and launcher tasks and noticed that my fan speed was set at 61% so I went into the fan settings and set the speed to 50% but the fan speed didn't...

There are no mods to the case except two holes that I drilled in the back where the rear fan is located so I could mount a radiator on, but it isn't too noticeable. The case comes with all its original accessories but I don't have the original box. I'm hoping to get $65 for the Thermaltake...

I decided to upgrade to some new cases so I decided to sell off the cases that I've been using. The Thermaltake case is in mint condition, aside from a few scratches here and there from when I was using it as a water cooling case. There are no mods to the case besides two holes that I drilled...

As the title says I've decided to sell some things off. Here is the breakdown: Dell M1210 Laptop *SOLD* D-tek Fuzion Waterblock *SOLD* Here are some Pics: I know the laptop is a little dusty, mainly because I hardly use it. (The vx revolution mouse doesn't come with the laptop, its just...

*FOUND ONE*

As the title says I've decided to sell off some things in time for holiday shopping. Here is the breakdown: Asus A8N SLi Deluxe motherboard (great motherborad) *SOLD* Intel C2D E6600 (OEM) *SOLD* Dell M1210 Laptop $1090-1200 shipped D-tek Fuzion Waterblock $49 shipped Here are some Pics: I...

To start off my friend decided that he wanted to go with the q6600 so he just gave me his e6600 processor. He said he hardly overclocked it and he doesn't know the stepping or week so he doesn't know whether it would overclock well. So here I am now with two e6600 processors and I have no clue...

Its that time again to upgrade and I decided its time to part out with my second rig so I can make room for my main one. Here is the breakdown I have an Asus A8N SLi Deluxe motherboard (great motherborad) $105 shipped 2gb (4x512mb) OCZ Platinum Rev. 2 PC-3200 memory *SOLD* Opteron 165 (CCBWE...

*BOUGHT FROM LOGITECHFREAK*

*SOLD*

*SOLD*

I've finally decided to just get rid of the EVGA 680i motherboard. After RMA'ing memory for the third time and reading about the 680i killing memory randomly I've finally decided to get a new motherboard. I'm wondering if anyone has any recommendations or suggestions for good, overclockable...

To start off here are the specs: eVGA 680i mobo Crucial Ballistix PC-8000 DDR2 2x1gb memory XFX 8800GTS 640mb WD SATAII 400gb drive Seagate SATA 500gb drive Windows XP Now my computer has been running fine but just recently I have been getting random bsod saying "BUGCODE_USB_DRIVER." First...

I recently just built my water cooled system and here are the specs: Intel C2D e6600 BFG 8800GTS 640mb EVGA 680i Mobo Crucial Ballistix 2x1gb PC2-8000 (DDR2-1000) Right now I'm running everything at stock speeds and my temps are 27-28C idle and 31-32 load. Now I've been trying all day to oc...

I just got all my parts in and just finished setting them up. My specs are: Intel E6600 Conroe 2.4GHz, Crucial Ballistix 2x1GB PC2-8000 DDR-1000, EVGA 680i, 2x Seagate SATA. My water cooling parts are: Pro-120 Hi Performance Radiator...

I have a quick question. I've been going back and forth with oc my cpu and have a problem with the readings in CPU-Z. Right now I have my cpu oc to 3.33GHz and the voltage is 1.4v in the Bios. I have the multiplier set at 9 and the FSB at 370MHz. Now when I open CPU-Z the multiplier randomly...

This is just great. Yesterday I finally received my P5B Deluxe, E6600 Conroe proc and Crucial DDR2 1000 (PC28000), I already had three sata drives ready to format and use. I have a 500W OCZ power supply and am water cooling the system. Now I set everything up last night and turned it on and it...

I have a quick question about setting up a RAID-0 array between my hard drives. I currently have 1 500gb WD SATA drive, 1 300gb Seagate SATA drive and a 500gb Seagate SATA drive. I was wondering if there was anyway that I could setup a RAID-0 array between the WD and 500gb Seagate drives without...

I finally gave in a bought an e6600 and now I need to buy a motherboard and memory. I was searching around to see what people recommended and it came down to these two choices. I'm going to mainly use the mobo to oc so thats really my main draw...

I just received my XFX 8800GTS video card today and was very excited to put this thing in my computer. I previously had a BFG 7800GTX 512mb and my current setup is Opteron 165 (oc'ed to 2.7), 2gb OCZ DDR Platinum, DFI Ultra-D mobo, OCZ 500W PS and two sata drives. Now I read the specs on the...

Found an Opteron 165 so I'm all set.

I just built a new system and here are the specs: Athlon 64 3700+ San Diego core 2x512mb OCZ Platinum Rev. 2 EVGA Geforce 7800gt CO Maxtor 250gb IDE hard drive DFI Lanparty UT Ultra-D mobo (Modded to SLI) Now this replaced my old system which was: ASUS p4p800 deluxe -e mobo BFG...

Forget this thread I just put the stock heatsink fan back on and the temps are fine. So if anyone could delete this thread it would be great.

Bought 2x512mb of Crucial memory and don't really have any need for them anymore. I haven't overclocked them because I have no idea how to and only used it for a week until I noticed that my old memory is faster. http://www.newegg.com/Product/Product.asp?Item=N82E16820146546 I'm hopin to...

Right now I have an AMD 64 3700+ @ 2.7 and its running pretty good but all this talk about opteron's and x2 processors is getting me curious as to whether I should buy a dual core cpu or not. Right now I'm looking at the opteron 165 and 170 and the prices are ridiculous. I haven't seen either of...

I just bought an evga 7800gt CO with stock 470/1200. Now I'm thinking of buying another video card to run in SLI and was wondering if I can buy a different manufactured 7800 gt and would it work with my video card. Right now I'm thinking can I run a XFX 7800gt with my evga 7800gt CO and would...

just like the title says need some memory for new machine so start sending them pm's no heat but I do have ebay: http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=jaded256&iid= email: [email protected]

I am building another rig because mine is already done for. So far I have a DFI LanParty UT nF4 Ultra-D motherboard, an Athlon 64 3700+ San Diego, and a Geforce 7800gt CO. Now I am looking at different memory and was wondering which one of these would be the best for a system like the one I'm...

Bought a card.

My lcd montior just died on me and I am looking to buy a new one. I've looked around the forums to see what people recommend and I can't decide which one to get. These are the choices that I've come down to Hyundai L90D+ LG L1980U Samsung 193P Dell Ultrasharp 2005FPW Samsung...

I just set my new system up ASUS P4P800E Deluxe Socket 478 ATX DDR400 Motherboard,Intel Pentium 4 Processor 3.06GHz with Hyper-Threading Technology, and a GeForce 6800 GT Video Card. Now I'm trying to decide which one of these memory sticks I should get: 1. CORSAIR XMS, Xtra-Low Latency...

Just bought a Xerox 19' xg-91d monitor and its working great except for one problem whenever i full screen a movie or something the picture becomes all blurry and i can barely make out the screen but when i exit full screen the picture is perfect. The screen refresh rate i have it on is 75 hertz...