Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
I have the Kingston M-Series 160GB and have flashed it to the latest Intel firmware. Trim works fine as the Kingston M-Series are just rebadged Intel X25-M drives.
I have done a quick search regarding my question but I haven't found anything. I just purchased a Kingston M Series 160GB (SNM225-S2/160GB) and currently use a WD 500GB hard drive for my OS and programs. Is it possible to take an image of the WD drive and transfer that to the new Kingston SSD...
Not to de-rail the thread but I've used the same keyboard for 3 years and have very minimal fading on some of the buttons. If yours are fading within 8 months then send it back and demand a new one.
Yes, I manually set the RAM to those settings (and adjusted a few others). But the system crashes when all 3 sticks are in. I'm running just one stick just now, and everything is smooth. So I presume either one or both the other sticks (that are not in the computer) are faulty, and that's what...
Well, done a clean install and it now boots into Windows. Was a little unstable, several BSODs and crashes. So I took out the RAM and left one stick in, now it's running perfectly. Very stable and fast. I guess it was down to the cheap RAM I purchased. Once I sell the extra i7 920 I'm buying...
Right, I will do a clean installation using the new computer and see if that resolves anything. I will get back to this thread later today. Thanks for the input so far.:)
Hello guys and gals. I am in a sticky situation, and I'm completely perplexed. I have built a new computer:
Asus Rampage II Extreme
Intel i7 920 D0 Processor
6Gb 1333MHz Triple Channel OCZ Gold Series (OCZ3G1333LV6GK)
Corsair HX 750W
I have had serious trouble installing Windows 7 onto...
I have reseated the CPU and powered on the motherboard using the power button on the actual board, and by shorting the switch pins. Just to confirm, the fans, hard drives, disk drives, etc come on. It's just there is no output to a monitor and the fan connected to the cpu fan connected does not...
Okay, thanks for the replies. With only the cpu connected to the motherboard, the problem still persists. I have tried all the possible RAM positions and reset the CMOS many times, to no avail. I get absolutely no output, no beeps, nothing on the screen, nothing. Looks like it's either a...
I have put together a new rig consisting of:
Gigabyte GA-EX58-UD5
Intel i7 920 D0
OCZ 1333MHz RAM
When I switch it on everything turns on apart from the CPU fan, and the LED above the CPU area stays red. The system does not even load the BIOS (no signal to monitor). I have reseated the...